miscellaneous used for sale (1,693)

Like-new BIG 20ft sea freight - container, - Year of construction 2026, - Like new, only used 1x, - Volume: approx. 33.2 m³, Outside dimensions, - Length: 6,058 m (approx. 6,06 m), - Width: 2,438 m (approx. 2.44 m), - Height: 2,591 m (approx. 2,59 m), Internal dimensions, - Length: approx. 5,898 m, - Width: approx. 2.352 m, - Height: approx. 2,393 m (door opening height 2.28 m), We are happy to offer delivery, possibly with crane relocation for an extra charge., Please contact us to discuss further details.

Like-new BIG 20ft sea freight - container, - Year of construction 2026, - Like new, only used 1x, - Volume: approx. 33.2 m³, Outside dimensions, - Length: 6,058 m (approx. 6,06 m), - Width: 2,438 m (approx. 2.44 m), - Height: 2,591 m (approx. 2,59 m), Internal dimensions, - Length: approx. 5,898 m, - Width: approx. 2.352 m, - Height: approx. 2,393 m (door opening height 2.28 m), We are happy to offer delivery, possibly with crane relocation for an extra charge., Please contact us to discuss further details.

WANGEN PUMPS, TW IN 70 Used Wangen TWN 70 hygienic twin-screw pump manufactured in 2014. Mobile unit equipped with an electric motor and variable-speed drive, suitable for the gentle transfer of liquid, viscous and shear-sensitive products. The unit is mounted on a mobile support frame and is equipped with an electric motor, local variable-speed inverter and stainless-steel sanitary process components, as shown in the photographs. The wide operating-speed range allows the same pump to be used for both product transfer and CIP circulation, subject to the installed drive, seals and specific configuration. Technical Data - Maximum viscosity: Up to 1,000,000 mPa·s / cP - Maximum particle size: Approximately 20 mm - Maximum flow rate: Up to approximately 25 m³/h at 4,000 rpm - Maximum differential pressure: Up to 16 bar - Maximum product temperature: Up to 130°C -  ...

WANGEN PUMP TWIN 104 Used Wangen TWN 104 hygienic twin-screw pump manufactured in 2014. Mobile unit with variable-speed electric drive, suitable for high-capacity transfer of liquid, viscous and sensitive products. The contact-free twin-screw pumping principle reduces shear forces and helps protect the consistency, structure and appearance of sensitive products The pump offers high suction performance and reversible operation, making it suitable for tank emptying, loading, unloading, recirculation and product recovery The wide operating-speed range allows the pump to handle both process products and cleaning liquids. The pump is mounted on a mobile support frame and equipped with an electric motor, local variable-speed inverter and stainless-steel sanitary process components, as shown in the photographs Technical Data - Maximum product temperature: Up to 130°C - Maximu ...

ROMACO PROMATIC CARTONING MACHINE, PC4250 Horizontal continuous motion cartoner for packaging strips, sachets, etc. Built in 2014. - Barcode reader Laetus Argus WT10, with integrated camera CoCam 880 - Leaflet folder GUK RS21/760 (from reel) - Hot-melt gluing Nordson ProBlue unit PRODUCTION - Output: up to 270 cartons/min - Carton Size Range: (min) 20 x 15 x 60 mm; (max) 120 x 80 x 210 mm ENERGY CONSUMPTION - Power requirements: 400 V; 60 Hz; 9 Kw; 3+N+PE - Air pressure: 6 bar - Weight: 3100 Kg

4x Sea Containers / Storage Containers 20 Feet for Sale Individual sale or complete acceptance possible For sale are 4 used sea containers, which were previously used as storage containers. The containers are ideal as storage, material, tool or construction site containers as well as for private or commercial use. Container 1 20 ft standard container Year of Make: 1999 External dimensions approx.: 6.06 x 2.44 x 2.59 m (L x W x H) Permissible total weight: 30,480 kg Container 2 20 ft standard container Year of Make: 2000 External dimensions approx.: 6.06 x 2.44 x 2.59 m (L x W x H) Permissible total weight: 30,480 kg Container 3 20 foot container Year of Make: 2010 External dimensions approx.: 6.06 x 2.44 x 2.90 m (L x W x H) Permissible total weight: 32,500 kg Container 4 20 Foot High Cube Container Inner dimensions according to the nameplate: Length: 5.2 ...

MARCHESINI BLISTERING MACHINE, MODEL MB 450 Blistering machine for the professional packaging of blisters in the pharmaceutical industry. Additional information, technical details and quotation available on request. Built in 1996. CHARACTERISTICS - Stainless steel GMP-compliant construction - Scanware Camera system - Many formats available - Weight: 4000 kg PRODUCTION - Output: up to 600 blister/min - Blister size: 30 - 86 mm W x 3 - 12 mm H x 70 - 140 mm L - Blistering materials: Polypropylene , ALU/ALU, PET, PVC+Aclar® - Workable products: capsules, tablets, oblongs, etc.

Professional-quality enclosed fibre laser marking machine, designed for high-precision, permanent marking and engraving of metals, plastics and other suitable materials. Ideal for manufacturers, engineering companies, jewellers, toolmakers, product manufacturers, sign/engraving businesses and anyone requiring professional industrial laser marking. Machine Features Trotec SpeedMarker 300 Industrial fibre laser marking system Fully enclosed Class 2 laser safety system Suitable for marking and engraving metals and plastics Professional Trotec SpeedMark software Suitable for serial numbers, barcodes, QR/Data Matrix codes, logos, text and product identification Can process individual components as well as larger production batches Suitable for materials including stainless steel, aluminium, brass, precious metals and various plastics Air-cooled, maintenance-free fibre laser sys ...

Optimizing Cross-Cut Saw manufactured in 2021. This OPTIMA 60SNC 6200 CE features a maximum workpiece height of 110 mm and a width of 300 mm, with an impressive infeed length of 6,200 mm. It offers a feeding speed of 60 m/min and a saw blade diameter of 450 mm. If you are looking to get high-quality cutting capabilities, consider the OPTIMA 60SNC 6200 CE machine we have for sale. Contact us for further details.

We sell SKF 24036CC spherical rollers or SKF NJ 2228 ECML ball bearings unused items

Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details.

Manufacturer & Model, Farwick (with CE), Year of manufacture, 2000, Operating hours, approx. 6,500 h (total operating hours), Engine / Exhaust gas standard, EU STAGE 4 engine (own drive motor), Construction / Mobility, trailer chassis with its own engine, Performance, Up to 85 m³/h (material-dependent), Fractions, 2 fractions (coarse and fine), Drum dimensions, Diameter: 1,600 mm | Length: 4,500 mm, Sieblochung / Siebdurchmesser, 20 mm, Materialaufnahmebänder, 2 belts (all belts completely NEW), Transport dimensions (L × W), approx. 10,500 × 2,500 mm, Total weight, approx. 9,970 kg, Approvals / Certificates, CE certification, AWG approval according to the Waste Management Act

This 3-axis MTE BF 4200 was manufactured in 2002. It features an impressive X-axis travel of 4,000 mm and Y-axis travel of 1,200 mm, with a robust table size of 4,200 × 1,000 mm and a maximum table load of 13,000 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 4200 bed type milling machine we have for sale. Contact us for further details.

This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details.

Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details.

Control cabinet for ELB surface grinding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Siemens Vacuum Pump Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

HOMAG control system Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Bar Feed Irco Shipping also abroad. Viewing: Basically, I would like to point out that the item can be viewed before buying in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Tool changers from HOMAG Shipping also abroad. Viewing: Basically, I would like to point out that the item can be viewed before buying in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

2 pieces in stock CONTAINERMAT NCL100HS roll-off container canopy with electric canopy A high-quality CONTAINERMAT NCL100HS container canopy with electrically driven canopy is offered for safe and comfortable coverage of roll-off containers, chip containers as well as collection and disposal containers. The soft top is adjusted by a geared motor with trapezoidal spindle drive. For safe operation, the system is equipped with two-hand operation. In addition, the system has an integrated oil drip pan and is therefore particularly suitable for use in metalworking companies and production environments. Facilities Manufacturer: CONTAINERMAT Type: NCL100HS Electrically movable soft top Drive via geared motor and trapezoidal spindle Safety two-handed operation Integrated oil drip pan Robust steel construction Suitable for roll-off containers and chip containers CE-compliant  ...

GLOVE'S WATER TIGHT TEST MACHINE MANDRELS : 80 (40 LEFT T5863094 AND 40 RIGHT) TRANSPARENT

F5: 5.8M3 SHUTTLE KILN FOR HAND FORMER SPECIFICATION: WARE: HAND FORMER KILN VOL: 1 CARS 5.8M3 LOAD: 2,880MM WIDE X 1,220MM LONG X 1,650MM HIGH (3 DECK) FUEL: THE KILN IS DESIGNED TO OPERATE ON: LPG AND NATURAL GAS TEMP: NORMAL OPERATING 1,280C MAXIMUM 1,400C

Modern and high-quality bakery equipment including sales counter. The furnishings impress with a timeless, friendly design in a wood look, combined with black accents and glass - ideal for bakeries, bakeries, cafés or shop-in-shop concepts. Dimensions: Total length: approx. 540 cm Depth of the counter: approx. 120 cm Equipment & Features: Spacious sales counter with glass top for optimal product presentation Integrated bread and roll shelves made of metal, dimensions (L x H) approx. 540 cm x 280 cm Several glass shelves on the back wall Work area with sink Refrigerated counter, approx. 130 cm Base units with drawers, cabinets and refrigerator compartments High-quality work surfaces in the counter area Stylish pendant luminaires for a pleasant sales atmosphere Bread slicer optional The furnishings are functionally well thought-out, space-saving and at the same time ve ...

Assembly tables with felt pad used, Stable design, feet adjustable, 2,7x1,97 m 2 pcs. Pricing per piece plus VAT ex location

Data connection for documented measurement possible at an additional cost For measuring furniture parts or workpieces made of steel or plastic  Measuring range 2,500 x 1,000mm  Year of construction 2010 To measure: lengths, widths, angularity, drilling coordinates, drilling depths (relative), recesses, Record relative dimensions in X- / Y plane  Display: 4 x 20 characters LCD display (alphanumeric)  Voltage: 230 V, 50 Hz, 0.5 A  Cartesian system of measurement in 2 axes in portal design  Measuring portal mounted on both sides on dirt-protected steel roller guides  Measurement via contactless magnetic tape system  Base frame in horizontal measuring plane in 60° inclined design Accessories included:  Turret with 6 measuring adapters  Measuring device for Z-axis  Workpiece vacuum clamping device for secure holding of the workpieces RIGHT a ...

Hydraulic Flow and Pressure Control Valve14 Model B: max flow rate of 114 l/min, pressure set at the factory at 140 bar. The set pressure can be increased up to 220 bar.

A valve for regulating the flow and pressure of a hydraulic system. Model A: max flow rate of 60l/min, factory set pressure at 140 bar. The set pressure can be increased up to 220 bar.

Swiss-made Isoma centering microscope, in very good condition. 10x magnification, hardened and ground steel tube Ø25h5.

From a current recycling we offer you a motorhome from the manufacturer Glücksmobil, type T 741. Year of Make: 2022 Registration date: 08.07.2022 (1st hand) Condition: Signs of use KM: approx. 80500 Asking price: 49.900 € gross Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 85254 Sulzemoos The sale is without warranty Subject to prior sale