other storage equipment used for sale (3,095)

Heating oil tank, 27.000 litres for heating oil / diesel – used - : Price: only 9.950.-€ (net) ex site, emptied, cleaned and incl. loading! Manufacturer: Kampitz Manufacturer Part Number: 42089 Year of Make: 2022 Type: Z 38 12-312 Volume: at permissible filling height: 27.82m3 Permissible. Filling Degree: 95% Material (inside and outside): S 235JR Hazard class: FP > 55 degrees C Permissible density: 1.0 kg/ltr. Test pressure storage space: 2.60 mWs Test pressure leak monitoring room: -0.60bar Max. medium temperature: 50 degrees C Medium: Heating Oil / Diesel Condition: good Available: immediately Location: Bünde, NRW

Tires, solid rubber tires, tractor tires, forklift tires -Condition: unused -Tire size: 7.00-15 SC10 -4 pieces available -Price per piece -Dimensions: Diameter 700 x 170 mm -Weight: 52 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

approx. 1,700 pieces, Euro stacking container in 1.19m x 610 x 420mm - used - : Price per piece from location: now only 5.-€ instead of 15.-€ (net)! Price for complete acceptance: now only 4.-€ instead of 12.50.-€ (net)! 1 truckload = 396 pieces! Manufacturer: unknown Year of manufacture: unknown External dimensions (LxWxH): 1,190 x 610 x 420mm Internal dimensions (LxWxH): 1,150 x 555 x 390mm Material: Polypropylene Weight per container: 10.8kg Colour: grey and few in yellow Approx. 396 crates fit per truck Condition: good Available: immediately Location: the main part is stored in Niedernberg (near Aschaffenburg)

approx. 198 pieces of open-fronted storage stacking boxes, metal, similar type: 14/7-2, approx. 50 x 30 x 20cm, with carrying rod - used - : Price per piece ex location: now only 7 € instead of 9.-€ (net)! Price for complete acceptance: now only 5 € instead of 9.-€ (net) / piece. Manufacturer: unknown, Type: similar to SSI Schaefer 14/7-2 l (for painted) Dimensions: 50cm deep x 31cm wide x 20cm high Dimensions inside: approx. length: 450 x width 300 x height 190mm Quantity: approx. 9,000 pieces Green With support rod Material: Sheet steel Load: Single: approx. 120kg Stack: 1.200kg Content: approx. 26L Weight: approx. 4kg Condition: very good Available: immediately Location: approx. 198 units in 63843 Niedernberg

5 pieces, mobile dock levellers made of aluminium, – used- : Price per piece from location: Type 1: normal (approx. 2 pieces) now only 450.-€ instead of 650.-€ (net)! Type 2: two side tread plates (approx. 3 pieces) now only 550.-€ instead of 850.-€ (net)! Manufacturer: unknown, could be Altec Type: unknown, could be HF 09, Year of manufacture: unknown Width approx. 1.50m Length with movable driveways at the ends: approx. 2.35m Load capacity: unknown, could be 1800kg Net weight: unknown, could be 107kg Original price approx. 1.900.-€ (net) Condition: good Available: immediately Location: Niedernberg near Aschaffenburg

Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...

Capacity per silo approx. 13.5 tons of flour with 100 kg scale VA Computer Dosimat MW Dimensions: 2,650 x 2,650 mm Height: approx. 4,200 mm complete with motor, control cabinet, etc. For Sale Price on request Phone +49 172 8345457

1. Property description The property on offer is a high-quality, modular lightweight hall from the renowned manufacturer Höcker. The cantilevered construction is based on a durable aluminium structure in combination with insulated wall and roof systems. This makes the hall ideal as a frost-protected storage, logistics or work surface. A particular advantage is the high flexibility of the system: The hall can be dismantled, moved or expanded, making it an economically attractive alternative to a new building. The hall was used commercially and is already functionally structured – immediate use is possible without major adjustments. Technical Data & Equipment Dimensions Length: approx. 35.00 m Width: approx. 15.00 m (cantilevered) Interior height: approx. 4.06 m (in the frame corner) Roof pitch: ~10° Floor space: approx. 525 m² Grid size: 5.00 m (7 fi ...

Mezzanine / Sigma Profilbau / Industrial Platform (Top Condition) For sale is a high-quality mezzanine / Sigma Profilbau built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without new construction Technical data: Profile : Sigma Total area: approx. 33 m x 30 m (≈ 990 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: 2.80 m x 4.40 m Railing height: 1.10 m Stairwell: 1 piece available Year of Make: 2017 Flooring: 38mm wood ⸻ ️ Description: Robust Sigma Profilbau platform Very good condition – can be used again immediately Large contiguous area → ideal for storage, order picking or conveyor technology Flexibly adaptable / expandable thanks to the grid Perfect fo ...

TOP mezzanine floor with equipment 33x30m 500Kg per m2 approx. 350 m2 2017 railing staircase TOP mezzanine floor with 10m wide barrier free Steel platform / industrial platform (top condition) 85,00 Net per m2 For sale is a high-quality mezzanine / steel structure built in 2017, ideal for industry, logistics, warehousing or production. The system is solid and suitable for high loads – perfect for expanding storage areas without building a new building. All the assets in the pictures are for sale. Shelving Racks/Conveyor Technology/ Stackers/ Ant/ Pallet Truck/ Bito Roller Rack/ Order Racking ⸻ Technical data: Total area: approx. 10 m x 33 m (≈ approx. 350 m²) Floor height (upper edge): approx. 4.10 m Lower edge of the stage: approx. 3.80 m Load capacity: 500 kg/m² Column grid: None clear width 10m Railing height: 1.10 m Staircase: available Ye ...

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, control block, hydraulic control block, control unit, control valve -Manufacturer: Linde, hydraulic control block, control unit, control valve for Linde H30 forklifts -Valves: see photos -Dimensions: 440/185/H900 mm -Weight: 10.8 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Attention: please note the condition shown in the photos -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

58 pieces of roll containers, transport trolleys with plastic plate – used - : Price per piece from location: only 85.-€ (net) Price for complete acceptance, per piece ex location: only 75.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Payload: unknown, should be at least 500kg Dimensions: Width: approx. 75cm Depth: approx. 70cm, with handles approx. 77cm Height: approx. 1.80m Most trolleys have a height-adjustable intermediate floor (wire mesh) 2 push handles Three sides closed Condition: good Available: immediately Location: Heilbronn

Description Electric stacker Jungheinrich Swift model EMC – factory-tested Load capacity 1000 kg Integrated charger with 230 V plug Lifting height: approx. 160 cm Overall height: approx. 200 cm Battery voltage 24 V

Description Pallet Truck – Hand Pallet Truck with Scales from Pfaff Silver Blue Model 4527137 from 2012 Load Capacity 2500 kg Scales Mettler Toledo up to 2000kg with Loading Power Supply 4 Point Load Cells Measuring System Fork Length 1150 mm Load Width 540 mm Lifting Range 85-200 mm Steering Wheel Polyurethane New Polyurethane Tandem Castors, Resilient & Low Noise Colour Sky Blue, RAL 5015

Description Platform trolley without handles – Trolley with drawbar Load capacity 500kg The advantages of this platform are very easy handling with precise guidance of the trolley and its safe parking even with a load that is secured against self-thrust in the absence of two wheels. It is not necessary to buy a drawbar for each trolley, just one drawbar is sufficient for several trolleys. The trolleys can be safely placed on the trailing edge, so they take up less space and are always ready for use. The

Description ELKALUB GLG 16/N000 is a lithium-saponified fluid grease with good oxidation resistance and excellent sliding friction behavior. The high load-carrying capacity enables the permanent lubrication of highly loaded gearboxes. ELKALUB GLG 16/N000 can be easily conveyed in central lubrication systems. A typical application of ELKALUB GLG 16/N000 are central lubrication systems of construction machinery or large sheetfed offset printing presses. Base Oil Mineral Oil Thickener Lithium Base Oil Viscosity 145 mm²/s Operating Temperature -20 C to 100 C NLGI Class 000 Machine Element Gearbox Industry Pressure

A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible.

Forklift gooseneck, gooseneck for roll pallets, heavy-duty roll pallets, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, forklift gooseneck -Gooseneck: with automatic locking -Load capacity: 4 t -Transport dimensions: 1060/2580/H850 mm -Weight: 522 kg

Roll pallet, heavy-duty roll pallet, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagons -Platform: 7100/2820/H800 mm -Load capacity: 12 t -Stake pockets: 2 pieces -Tires: Pneumatic tires, dual tires, 4 pieces 7.00-12, see photos -Transport dimensions: 7100/2820/H800 mm -Weight: 2760 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive -Manufacturer: Gessmann, Joystick Single-Axis Controller -Type: S21/22 -Number: 7 joysticks available -Price: per piece -Dimensions: 100/100/H260 mm -Weight: 1.1 kg/pc.

Drawbar head, control unit, operating lever, joystick, drive switch, single-axle joystick -Manufacturer: Gessmann, Single-axis joystick -Type: S 14 -Number: 20 joysticks available -Price: per piece -Dimensions: 70/50/H145 mm -Weight: 0.2 kg/pc.

A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg

Tires, solid rubber tires, forklift tires, solid rubber bandages, solid rubber elastic bandages -Solid rubber tires: Solid rubber elastic bandage with rim, 2 pieces -Tire size: Ø 410 x 130 mm -Bolt circle: Ø 145 x 18 mm -Hub bore: Ø 110 mm -Submission/Price: complete -Dimensions: Ø 410 x 130 mm -Weight: 21 kg/pc.