pharmaceuticals and cosmetics machines used for sale (434)

• Bottle formats: Diameter approx. 20\endash 40 mm, height approx. 45\endash 70 mm, according to format set • Output approx. 6000 bottles/h • With format set for round bottles Ø 24 mm x length 52 mm • Feed hopper with lifting device, • Aligner for correct positioning of the bottle on the conveyor belt (e.g., filling machine) • 240V/50 Hz

Machine for filling, inserting dropper inserts and sealing vials and bottles with screw caps (stable, stackable) • Maximum output 80 objects/min • 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling ranges possible by purchasing new pumps • 1 new replacement pump for filling range 20-100 ml • Anti-drip protection through suction back • Bottle feed through infeed turntable • Bottle discharge through discharge turntable • Press-in station for dropper insert diam. 12.2 x 19 mm with sorting pot • Screw-on station with pre-screwing and post-screwing for screw cap diam. 20.5 x 32 mm with sorting pot • Vacuum pump • Available bottle formats (all information without guarantee, no guarantee of completeness): - diam. 24.2 x 63.3 mm (10 ml) - diam. 29 x 74.2 mm (20 ml) - diam. 32.2 x 83.8 mm (30 ml) - diam. 35.4 x 71.7 mm - diam. 37 x 91 m ...

Granulator powder mixer with bolts LÖDIGE / LOEDIGE / LODIGE For wet granulation, without dehuller Year 1965, external dimensions (mm): 800x330 H 450 , Internal dimensions (mm): 175x180 H 173, Volume (L): 4

Water Distillation Plant for WFI Water Manufacturer : Kemiterm Type: 1000MS-6 Technical specifications : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

Nozzle separator Brand: Alfa Laval Type: STSX217S-31 C Technical specifications : max. throughput 160 m³/hour max nozzle capacity 60 m³/hour Temperature 0-100 °C Engine power 135 kW Documents from the control cabinet available Documents: Nameplate

FROILABO FIRLABO oven, Maximum temperature (°C): 250 , Elec: 230 V / 50 Hz, Capacity (L): 60 , External dimensions (mm): 540x525 H 640, Internal dimensions (mm): 400x400 H 387, Shelf dimensions: 310x360 , Number of shelves: 2

INTERCHIM PURI FLASH 4250 purification column. Last used October 8, 2025. Sold with keyboard and mouse., Link to manufacturer: .interchim/pp/1848/puriflash-4250.html

Applikon Pilot System 50L fermentation system Stainless, 50L pilot fermentation system

Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available

Filling line for cream Manufacturer: Kugler Type K 54 R Masch.-Nr. 12943 Composed of: 1x rotary table 1x Kugler filling machine, type K 54 R single-digit, built in 1983 with transport pin belt and sealing device Hopper for lids including feed and support, currently designed for filling into cans Lid Screwdriver Inkjet printer EBS 6000 Straffbanderolierer, Fabr. Pest Pewo Pack Type 450 SN including shrink tunnel Film width 30-450 mm Film thickness 0.02-0.1 mm Roll diameter max. 300 mm Film type: PE

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...

Marken Imaje Smartlase Marking 130x

• Dry-running rotary valve vacuum pump • Suction capacity 55 m³/h • Final pressure 150 mbar • Motor power 1.5 kW • Price per pump

Markem Imaje UI 100 control panel.

Powder mixer., Dimensions (mm): 1960x1490 H 1460, Gap dimensions (mm): 560

THERMO FISHER MICROCENTRIFUGE, Tubes : 24 , Elec: 230 V / 50 Hz, timer: 1 to 99 minutes , Max speed: 13 000, Temperature range: -9 to +40°C , Refrigerant: R-134a

THERMO FISHER microcentrifuge., Tubes: 24, Elec: 230 V/50 Hz, timer: 1 to 99 minutes, Max speed: 13 000, Temperature range: -9 to +40°C

I) CHARACTERISTICS Useful volume: 150 L Total volume: 175 L Footprint: 900 x 900 mm Tank diameter: 600 mm Manhole height: 1150 mm (approx.) Drain height: 225 mm Cylindrical shape with manhole on conical top and 15° conical bottom with total drainage brought forward. Vertical position on tubular feet fitted with 4 fixing plates with 4 swivel castors, 2 of which are fitted with brake (at the rear of the tank). Note: Anti-static and dissipative casters + grounding lug. II) MAXIMUM CONDITIONS OF SERVICE Working pressure: atmospheric Serving temperature: room temperature Equipment working in explosive atmospheres according to ATEX Directive 2014/34/EU. Note: a pressure/depression valve + 50 gr / - 5 gr will be provided for installation on the tapping in the center of the lid. III) EQUIPMENT III.1) On a 15° conical summit: – 1 manhole Ø 350 mm closed by bolts – 1 DN 38 clamp connection  ...

APV high pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 liters/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6

Thermo Scientific incubator. Sold with 1 filter and a water reservoir cover., Dimensions (mm): 875x640 H 1145, Internal dimensions (mm): 505x440 h 665, Number of shelves: 2, Maximum temperature (°C): 55°C, Sterilization temperature cycle (°C): 180 , CO2 control : ± 0.1%, O2 control: ± 0.1%, Humidity: RH: >_93% @ 37°C

SERAIL RP2V freeze dryer sold with a vacuum pump, Tank volume: 10 Liters

Thermo Scientific Incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C

Positions: 7 , Elec: 230 V

Fluidized bed dryer 1 drying/granulation tank (4.7 liters) with Top spray option 1 WURSTER tank (2.6 liters) with sample collection, Elec: 380 V / 50 Hz , Revolutions per minute (RPM): 3000, Compressed air pressure: 6 bar

Vacuum pump, Max flow: 2.0 m3/h, Limit void: 2 mbar , Engine power: 0.16kW , Link to manufacturer: shop.vacuubrand/en/vario-chemistry-pumping-group-pc-3001-variopro-vp-5 8.html?_gl=1z327z1_upMQ..&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWNgJFYzk804i8 3FsvmvE6pdlCfxBV9T2H enFLlzgew3vJwq7OJokRkaAmfdEALw_wcB#product -info-unit-table, : 0.16kW

CERAM rotary sieve Sold with a 4 mm mesh, Number of sieves: 1, Mesh size: 4 mm, Engine: Leroy Sommer: 0.75 kW, Dimensions (mm): 1600x720 H 1215

BÜNDER SCHMITT corker, Elec: 400 V, Dimensions (mm): 950x1120 H 1880

• Folding box sizes W 30\endash 100, H 15\endash 85, L 70\endash 150 mm • Blister sizes L 65\endash 145, W 25\endash 95, H 3.5\endash 12 mm • Output 15\endash 120 folding boxes/min, cycled, depending on format/product • Offset plug closure on both sides • 3 blister destacking chutes for blisters 98x60 mm, 98x44 mm, 78x34 mm • Replenishment chute • Brochure folding and insertion machine from stack GUK FA 21/4 Cartonac 2000-2, built in 2014, 4 folding pockets • 2 colour embossing stations for folding flap on insertion side and opposite insertion side (embossing rollers not included in scope of delivery) • Missing packaging rejection with ejection counter-check • Code reading Laetus brochure bottom/top, folding box code opposite insertion (COSI 221) • Brochure presence in folding box • New in 2013, complete conversion of the control system by Uhlmann at 10,284 operat ...

Blister packaging system consisting of: Horn + Noack N 916 thermoforming blister machine and Uhlmann C 130 folding carton cartoning machine N 916 thermoforming blister machine: • Set up for aluminium/PVC/PVDC/PP, 1-lane • Roller sealing • Film width max. 160 mm • Film feed max. 138 m • Drawing depth max. 12 mm • Punching dimensions max. 150 x 136 mm • Output max. 70 moulding cycles/min, max. 200 punching cycles/min • Mould film Ø 700 mm, cover film Ø 250 mm • 3 product feeders: aligned feeder, roller feeder, brush box with separate control (new in 2012) • Single-colour printing unit for cover film Hapa H-216-C, built in 2000, incomplete (without technical inspection) • Coding station with embossing printing unit • Perforating station • New in 2012: Laetus TLU LED PAL LXS MR colour camera with NAVIGATOR software and POLYPHEM wt evaluation unit/touchscreen fo ...

• Permissible load 200 kg • Lifting mast with floor bearing • Overall height 3,050 mm • Lifting height centre of mandrel to floor approx. 2.50 m • Load reversing gear with mandrel holder • Mandrel holder diam. 35 mm, L 460 mm, centre distance 600 mm • Lifting column manually swivelling • Drive 24/400V/50Hz