pharmaceuticals and cosmetics machines used for sale (407)

APV high pressure homogenizer., Maximum working pressure: 2000 Bar / 29,000 psi / 200 MPa , Nominal flow rate:: 11 liters/h , Minimum sample: 100 ml , Dead volume: 13 ml , ATEX: EEx e II T1%T6 / EE d IIC T1%T6

SERAIL RP2V freeze dryer sold with a vacuum pump, Tank volume: 10 Liters

Thermo Scientific Incubator, Internal dimensions (mm): 505x440 H 665, Number of shelves: 3, Maximum temperature (°C): 55°C , Sterilization temperature cycle (°C): 180°C , CO2 control: ± 0.1% , O2 control: ± 0.1% , Humidity: RH: >_93% @ 37°C

Positions: 7 , Elec: 230 V

Fluidized bed dryer 1 drying/granulation tank (4.7 liters) with Top spray option 1 WURSTER tank (2.6 liters) with sample collection, Elec: 380 V / 50 Hz , Revolutions per minute (RPM): 3000, Compressed air pressure: 6 bar

Vacuum pump, Max flow: 2.0 m3/h, Limit void: 2 mbar , Engine power: 0.16kW , Link to manufacturer: shop.vacuubrand/en/vario-chemistry-pumping-group-pc-3001-variopro-vp-5 8.html?_gl=1z327z1_upMQ..&gclid=Cj0KCQjwv7O0BhDwARIsAC0sjWNgJFYzk804i8 3FsvmvE6pdlCfxBV9T2H enFLlzgew3vJwq7OJokRkaAmfdEALw_wcB#product -info-unit-table, : 0.16kW

CERAM rotary sieve Sold with a 4 mm mesh, Number of sieves: 1, Mesh size: 4 mm, Engine: Leroy Sommer: 0.75 kW, Dimensions (mm): 1600x720 H 1215

BÜNDER SCHMITT corker, Elec: 400 V, Dimensions (mm): 950x1120 H 1880

• Folding box sizes W 30\endash 100, H 15\endash 85, L 70\endash 150 mm • Blister sizes L 65\endash 145, W 25\endash 95, H 3.5\endash 12 mm • Output 15\endash 120 folding boxes/min, cycled, depending on format/product • Offset plug closure on both sides • 3 blister destacking chutes for blisters 98x60 mm, 98x44 mm, 78x34 mm • Replenishment chute • Brochure folding and insertion machine from stack GUK FA 21/4 Cartonac 2000-2, built in 2014, 4 folding pockets • 2 colour embossing stations for folding flap on insertion side and opposite insertion side (embossing rollers not included in scope of delivery) • Missing packaging rejection with ejection counter-check • Code reading Laetus brochure bottom/top, folding box code opposite insertion (COSI 221) • Brochure presence in folding box • New in 2013, complete conversion of the control system by Uhlmann at 10,284 operat ...

• For measuring cups 2.5\endash15 ml for PP28 closure • Measuring cup diam. 37/30 mm, height 28 mm • Feed hopper with steep conveyor, mobile • Steep conveyor plastic belt white, belt width 500 mm, belt length 2,200 mm, bar spacing 120 mm, bar height 25 mm • Measuring cup sorting pot with enclosure • Transfer belt to transfer robot • Transfer robot with horizontal and vertical axis • Suction arm for 3 measuring cups for transfer to bottle conveyor belt • Bottle size diam. max. 90 mm, height max. 140 mm • PLC Siemens S7-200 • HMI Siemens TD 200 • Drive 220/24V/50Hz

Stock# UG6391 Automatic machine for lipstick filling Manufacturer: Cosmatic Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2016.

• For single and multiple containers • Straight infeed conveyor with stacking device • For PE film • Film width 30\endash 200 mm • Film thickness 20\endash 100 µm • Roll diameter max. 300 mm, core diameter 70/76 mm • Output max. 24 cycles/min, depending on format • PLC Eberle PLS 508 with Eprom • Enclosure with safety switches • Connection 400V/50Hz/8.5kW This machine is offered at a special price and sold as-is without technical inspection.

ADMV Tube feeder The machine has been used as a mascara tube feeder Siemens control panel

Cap feeder for various types of caps, tubes, small bottles, etc. Stailess steel Year 2005

Cap feeder for various types of caps, tubes, small bottles, etc. Weckerle Kappen B Stainless steel Year 1998 2 pc available

Ekato Unimix Vacuum Processing System SRT 50 Order# 4808/2, Series# 70888. Year of manufacture 2004 Description • GMP compliant • EKATO PARAVISC agitator with EKATO UNIMIX scraper system Power 3 Kw, 5.2 Kw at 87 Hz Speed 21-121 rpm • Patented homogenizer EKATO UNIMIX S-JET, located at the lowest point of the container, for internal and external homogenization Power 5.5 kW, 9.5 Kw at 87 Hz Speed 1,000 – 4,800 rpm • Lid lifting device can be swivelled • Integrated CIP cleaning system • Integrated heating/cooling system Electric heating 12 Kw Control Siemens S7 with OP 17 Pressure and vacuum resistant with integrated vacuum system Product space: Capacity 85 litres / 50 l usable volume, Pressure -1/2 bar, Temperature 10/152 °C, Thermal system / double jacket: Capacity 11 l Pressure -1/+4 bar, Temperature 10/152 °C, Complete do ...

Technical Specifications Temperature range approx. –90 ... +100 °C Filling volume up to 27 L Bath opening (W × D) approx. 282 × 257 mm Bath depth (total/usable) 220 mm / 180 mm Pump capacity approx. 20 L/min at ~0.5 bar / 0.33 bar Materials Stainless steel, nickel-plated copper, PETP, PTFE Temperature accuracy resolution 0.01 °C Control Microprocessor + LCD + Pt 100 Interfaces RS-232, Analog, Timer/Clock

Technical Data – Heraeus UT 20 1. Basic data • Model: UT 20 (convection drying oven, Function Line) • Usable volume: 210 litres • External dimensions (W × D × H): approx. 754 × 910 × 720 mm • Internal dimensions (W × D × H): approx. 610 × 672 × 514 mm 2. Temperature range • Working temperature: ambient temperature +20 °C to max. 250 °C 3. Temperature constancy according to DIN 12880 • Deviation at 150 °C (spatial): ± 3 K • Deviation at 150 °C (temporary): ± 0.3 K 4. Electrical data • Power supply: 230 V, 50/60 Hz • Rated power: 2320 W (2.32 kW) • Weight: approx. 100 kg 5. Equipment and construction • Standard: 2 shelves, expandable up to 16 • Stainless steel interior, easy to clean (removable straps, rounded corners) • Circulating air system for even temperature distribution • Microprocessor temperature control (optional: P v ...

1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Type: C-10-2 Volume: 15 liters Prod.Nr.: 235 SUS Manufacture: 2001

1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Boiler/Vessel Double Jacket Jacket Type: C10-2 Volume: 15 liters Prod.Nr.: 1137 Manufacture: 2002

Manual cream filler. Sold with two pumps. Barely used, in very good condition., Capacity (ml): mini 10 / Maxi: 160 , Hopper volume:: ca. 10 liters , Link to manufacturer: wuerschum/appareils-manuels.html, Cadence / hour: 30-600 pieces/hour

RBP Bauer ST50 blister punch - offers the possibility to divide any standard blisters into single pocket blisters or pocket groups, blister size max. 145 x 130 mm (BxL), output infinitely variable up to 40 blister per minute, electrics 230V/50-60Hz, Siemens SIMATIC S7-200 with SIMATIC OP3 Operator panel, pneumatic 6 bar, machine dimensions approx. 1100 x 600 x 1400 mm (LxWxH), machine net weight approx. 130 kg, mobile machine on wheels

ZALKIN TM3 Corker

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suitable for containers with a diameter of 8 to 52 mm and a height of up to 150 mm, includes format part for catridges Ø8.65x63 mm and Ø8.65x76 mm, electrics 400V, 50/60Hz, 3Ph, power 8 kW, compressed air 5 bar, height of infeed/outfeed 900 +/- 25 mm, machine floor space approx. 2400 x 2600 mm, machine height approx. 2440 mm, machine net weight approx. 2800 kg, capacity up to 400 cartidges per minute

• Suitable for drying and granulation (intended for preparations for in vitro diagnostic use) • Batch operation • Peristaltic pump for spray liquid • Top spray nozzle for spray liquid • Scales • Product container volume 24 L • Batch volume max. 16 L • Batch weight 1-8 kg (depending on product) • Product suction lance from Müller barrel • Conical transition piece for emptying into Müller barrel • Heating register • Star filter for separating product and air flow • Inflatable seals • Product temperature max. 85°C • Explosion-proof container • Max. explosion pressure 10 bar • ATEX Zone 20 inside the mixer (according to conditions in 2010) • Equipment category 1 according to Directive 94/9/EC • Equipment group II, D (dust) • Protection class IP 5x • Max. surface temperature 180°C • Operator terminal MP 277 Touch • Process data acquisition with ...

Distillation plant for WFI water or pure steam generation Manufacturer : DEWA Type: DP 30 EVS Technical specifications : Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg Documents: available

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available

Plug valve, pharmaceutical version Manufacturer: Visval AG Type SoliValve 100 Year of construction August 2018 Suitable for the powder transfer industry. It allows the transfer and dosing of powder under the best containment conditions. It is suitable for operation within OEB5. Fully automatic and closed separation of solids in bags, bottles, drums (1L to 700L). The opening is controlled by a high-precision stepper motor and a backlash-free ball screw, which enables opening steps with an accuracy of up to 0.1 mm.

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...