Plastic injection machines used for sale (95)

AB25V: Designation: Arburg 275 V 250-70 Year of Make: 2007 Clamping force: 250kN Screw diameter: 18mm Tiebar spacing: 275 x 275 FROM 50V: Designation: Arburg 375 V 500-100 Year of Make: 2008 Clamping force: 500kN Screw diameter: 15mm Tiebar spacing: 375 x 375

Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999

clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...

Injection moulding machine Ferromatik K 125s/2f BJ 1995

clamping force: 600 kNinjection volume: 144 cm³screw diameter: 35 mmplaten size: 570 x 570 mmclosing stroke: 500 mmCondition: usedSpecification: Horizontal injection moulding machineclamping unit:- Clamping force max.: 600 kN- clamping platens: 570 x 570 mm- clear column distance: 370 x 370 mm- Distance between the mould mounting platens: 750 mm- Mould installation height: 250 mm- Opening stroke max.: 500 mm- Ejector travel hyd. Ejector stroke: 175 mm- Ejector force max.: 40 kNInjection unit:- Screw diameter: 35 mm- Screw length: 20D- Screw stroke max.: 150 mm- Max. dosing volume: 144 cm³- Moulded part weight: 121 g- Injection pressure: 1,820 bar- Injection flow max.: 154 cm³/s- Screw peripheral speed: 57 m/min-  ...

Injection Molding Machine Ferromatik 110s-2F BJ 1999

clamping force: 450 kNinjection volume: 135 cm³screw diameter: 35 mmplaten size: 550 x 430 mmCondition: second-hand,Specification: Horizontal injection moulding machineInjection unit:- Screw diameter: 35 mm- Screw length L/D: 17.3D- Dosing stroke: 140 mm- Screw speed: 20 – 480 rpm- Moulding volume: 135 cm³- Injection pressure: 1,065 bar- Increased injection pressure: 1,620 bar- Heating power: 6.8 kW- Number of heating zones (including nozzle): 4Clamping unit:- Maximum clamping force: 450 kN- Platen dimensions: 550 x 330 mm- Extended clamping plates: 550 x 430 mm- Minimum mould installation height: 180 mm- Maximum plate spacing: 530 mm- Opening stroke: 350 mm- Control system: EC 100Drive:- Pump drive power: 11 kW- Approx. weight: 3,300 kg-  ...

Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006

clamping force: 4.000 kNinjection volume: 2480 cm³screw diameter: 90 mmplaten size: 1.300 x 1.080 mmCondition: second-hand,Specification: Horizontal injection moulding machine Injection unit:- Screw diameter: 90 mm- Injection volume: 2,480 cm³- Maximum shot weight: 2,232 g- Injection pressure: 1,360 bar- Increased injection pressure: 1,600 bar- Heating capacity: 64 kWClamping unit:- Max. clamping force: 4,000 kN- Clamping plates: 1,300 x 740 mm- Extended clamping plates: 1,300 x 1,080 mm- Minimum mould installation height: 350 mm- Maximum platen spacing: 1,300 mm- Opening stroke: 950 mm- Core pull unit: 2-stage on BAP- Control system: EC 100Drive:- Pump drive power: 55 kW- Weight (clamping side) appr ...

Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009

CONTROLS  CNC controls MOULD CLAMPING UNIT  locking force: 350 to  die opening stroke max.: 350 mmEJECTOR (TABLE EJECTOR)  stroke: 150 mmINJECTION UNIT  stroke of screw: 80 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3700 mm  space requirements -front/back-: 1300 mm  total height: 2100 mm  total weight approx.: 2300 kgFeatures: - Includes pellet dryer: Labotek DDM 60 ALB3 units available

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008

Ref. no.: 17507Manufacturer: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Engel 3 ES 7050 / 1 500 Duo built in 1999 against bid.

Ref. no.: 16369Manufacturer: BATTENFELDYear of construction: 2005Clamping unitClamping force: 75 tonOpening stroke: 800 mmDistance between tie bars: 405 x 405 mmMould height min.: 150 mmMould height max.: 480 mmInjection unitScrew diameter: 18 mmInjection volume: 30 cm³Shot weight: 27 gInjection pressure: 2440 barMeasurements and weightDimensions: 4,5 x 1,7 x 2,0 mMachine weight: 4500 kgFurther information:BATTENFELD EM 75/120 UNILOG B4All-Electric Precision Injection Moulding MachineThe BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes.All major machine movements are driven by modern servo motors, providing: very low energy consumption  ...

Key data: 4200 kN, 527 g/PS, 70 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: KRAUSS MAFFEI Type: KM420-1900C2 Year of Make: 2006 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 70 mm Max. displacement: 1,047 cm³ Moulded part weight: 853 g/hp Control: MC5 Equipment: 2 pcs core train Robot SEPRO, type: SR4030 S3 VISUAL 12-way hot zone channel control Interface temperature control unit

clamping force: 1300 kNinjection volume: -- cm³screw diameter: 45 mmplaten size: 470 x 470 mmCondition: used,Specification: Horizontal injection moulding machine, Type: Allrounder 470 S 1300-350Injection unit:- Screw diameter: 45 mm- Centring ring diameter: 125 mm- Shot weight max.: 210 g (PS)- Injection pressure: 1,840 barClamping unit:- Clamping force: 1300 kN- Opening stroke max.: 850 mm- Mould installation height: min. 275 mm- Mould mounting platens: 470 x 470 mm- Operating hours approx.: 91,000 - Core pulls: 1x- Valve gate: 1x pneumatic- Hot runner control points: 12x- Temperature control unit interfaces: 6x (20 mA)- Conveyor belt in the machine- Selector unit. available- Release for high temperature up to 450°C- Communication card for ProSeS interface available- Robot  ...

used Arburg 520C 2000-675, built in 2000 for sale: Machine cycles = 3.6802.856 Pump hours = 46,142 Operating hours automatic = 37,814 Screw diameter = 60 mm Machine with safety fence and with used auxiliary unit, but without conveyor, without hopper and without handling. The machine is currently still connected, a visit would be possible at short notice.

clamping force: 1.000 kNinjection volume: 203 cm³screw diameter: 40 mmplaten size: 580 x 652 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 40 mm- injection volume: 230 cm³- weight: 205 gClamping unit:- Clamping force: 1000 kN- Centring: 125 mm- Platen size: 580 x 652 mm- Mould size: 400 x 400 mm- Mould thickness min.: 250 mm- Mould thickness max.: 450 mm- 1x core pull- Voltage: 3x 400V, 50Hz, N, PE- Total power: 25 kW- Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm- Weight approx.: 4,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate conveying on our homepage.The data for this ad was created with ModulMWS - the software solution ...

Injection moulding machine Battenfeld BK T 2500 BJ 1991

clamping force: 6500 kNinjection volume: 2011 / 323 cm³screw diameter: 80 / 45 mmplaten size: 1450 x 1350 mmCondition: used,Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1:- Screw diameter: 80 mm- injection volume: 2.011 cm³- weight: 1810 ginjection unit 2:- Screw diameter: 45 mm- injection volume: 323 cm³- weight: 290 gClamping unit:- Clamping force: 6500 kN- Centring: 200 mm- Platen size: 1450 x 1350 mm- Mould size: 1000 x 910 mm- Mould thickness min.: 450 mm- Mould thickness max.: 950 mm- 2x core pull- Handling: Yes- Voltage: 3x 400V, 50Hz, N, PE- Total power: 245 kW- Dimensions L/W/H: approx. 10,100 x 5 ...

Key data: 500 kN

Clamping force: 500 kN Clamping plate: 540 x 540 mm Tool opening travel: 350 mm Tool installation height min.: 200 mm Opening width: 500 mm Ejector stroke: 100 mm Total weight: approx. 2,300kg

clamping force: 800 kNinjection volume: 106 / 42 cm³screw diameter: 30 / 22 mmplaten size: 600 x 600 mmCondition: used,Specification: Horizontal 2K-injection moulding machine,injection unit 1:- Screw diameter: 30 mm- injection volume: 106 cm³- weight: 94 ginjection unit 2:- Screw diameter: 22 mm- injection volume: 42 cm³- weight: 37 gClamping unit:- Clamping force: 800 kN- Centring: 125 mm- Platen size: 600 x 600 mm- Mould size: 420 x 420 mm- Mould thickness min.: 250 mm- Mould thickness max.: 590 mm- Voltage: 3x 400V, 50Hz, N, PE- Total power: 42 kW- Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm- Weight approx.: 5,750 kgFurther DEMAG plastic injection moulding machines and aconveyor control/material station for 4 to 56separators for granulate ...

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

clamping force: 800 kNinjection volume: 177 cm³screw diameter: 35 mmplaten size: 580 x 580 mmCondition: used,Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400- Internat. Size specification: 800 - 400injection unit:- Screw diameter: 35 mm- L/D - ratio: 20D- Injection volume: 177 cm³- Injection pressure: 2387 bar- Cylinder heating: 8,8 kWclamping unit:- Clamping force: 800 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 580 x 580 mm- Clear column distance: 400 x 400 mmTotal machine:- Oil tank filling: 220 ltr.- Pump capacity: 15 kW- Voltage: 3x 400V, 50 Hz, N, PE- total power: 23,8 kW- Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm- Weight without  ...

Key data: 1400 kN, 139 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt

clamping force: 500 kNinjection volume: -- cm³screw diameter: 25 mmplaten size: 400 x 400 mmCondition: used,Specification: horizontal injection molding machine, - usedinjection unit:- Screw diameter: 25 mm- shot volume max.: -- cm³- injection pressure approx.: 1290 bar- heating zones: 4- Heating power: 4 kWclamping unit:- clamping force: 500 kN- opening stroke max.: 325 mm- platen distance max.: 550 mm- clamping platen size approx.: 400 x 400 mm- tie bar distance: 270 x 270 mm- pump motor: 15 kW- total power: 19 kW- operating voltage: 380V, 50Hz- Weight approx.: 1.870 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

clamping force: 4200 kNinjection volume: 572 - 1716 cm³screw diameter: 90 mmplaten size: 1040 x 1040 mmclosing stroke: 620 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

clamping force: 700 kNinjection volume: 103 cm³screw diameter: 30 mmplaten size: 432 x 310 mmclosing stroke: 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection molding machine Haitian Zerres ZE600 built in 2019 and MB Conveyors conveyor belt from 2015.

clamping force: -- kNinjection volume: 230 cm³screw diameter: 40 mmplaten size: 475 x 475 mmCondition: used,Specification: Horizontal injection moulding machine,injection unit:- Screw diameter: 40 mm- Cylinder diameter: 40 mm- Spraying volume: 230 cm³.Clamping unit:- tie bar distance: 475 x 475 mm- Operating hours approx.: 30000 h- Air valve- Core pull- 12-way hot runner controllerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 kN, 359 g/PS, 50 mm

Year of construction 2011 + 2012 Clamping force: 150 tons. Screw diameter 50 mm Injection weight PS: 359 g Injection pressure: 2000 bar tie bar distance: 520 x 520 mm Machines are in good condition, and still in production

- Battenfeld TM3500 / 1900 BJ 2002 or 2001 control B4 without robot for sale. - The machine is currently running in production, no defects.

2 x Battenfeld injection moulding machines type: TM 180/750 BJ 2010

Injection moulding machine Engel DUO 4550/800 BJ 2004

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

Key data: 650 kN, 22 mm

Injection moulding machines BATTENFELD HM 65-130 Stock No.: 503671 Manufacturer: BATTENFELD Type: HM 65-130 Control: UNILOG B6 Year of Make: 2011 We offer for sale a used injection moulding machine BATTENFELD HM 65-130 from 2010. Ideal for a wide range of plastic processing applications, this compact and powerful injection molding machine gives you precision, reliability, and energy efficiency in a rugged design. The BATTENFELD HM 65-130 is perfect for producing high-quality plastic parts with high repeatability and is particularly energy efficient, making it a cost-effective solution for your production needs. Why should you choose this injection molding machine? Compact design: Ideal for smaller production spaces without compromising on performance. Energy efficiency: Low energy consumption for sustainable and cost-effective production. Reliability: Excellent machine q ...

year 2009. injection volume 9 cm3. Immediate ex stock available

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

Arburg 570C2000-800 FY2006 Golden Edition, 1 core hoist, 1 conveyor belt 33.400 Multilift SELECT 6kg Arburg 470C-2000-800 FY2005 No core features; 1 conveyor belt

Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request

Injection moulding machine Battenfeld Machine Type TM 2700/2800 Control Type B2 Year of construction 2003/04 Screw diameter 75 mm

Injection Molding Machine FCS SD 6000 BJ 2016

Key data: 2500 kN, 476 g/PS, 55 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM250-1000CX Year of Make: 2017 Clamping force: 250 tons Spar spacing 630 x 630 mm Screws DN: 55 mm Max. displacement: 523 cm³ Moulded part weight: 476 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit

Key data: 4200 kN, 2 g/PS, 80 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit