post press: other used for sale (845)

HORIZON GMS 7 -Automatic book spine taping machine Year 1996 -Length of Spine: Manual Feed (80 mm -3.1″ to No Max. Limit) or Automatic Feed (180 mm- 7.1″ to 320 mm -12.5″) -Book Width: Manual Feed (60 mm- 2.4″ to No Max. Limit) or Automatic Feed (128 mm- 5″ to 273 mm- 10.7″) -Taping Thickness: Manual Feed (2 mm- 0.1″ to 30 mm -1.2″) or Automatic Feed (5 mm- 0.2″ to 15 mm- 0.6″) -Taping Speed: 4,000 books/hr. (180 mm/7.1″ long) -Tape Type: Water-moistened adhesive tape -Voltage/Frequency: 100V 50/60Hz, 115-120V 60Hz, 230V 50Hz -Dimensions (W x D x H): 72.1″ x 21.7″ x 36.7″ -Machine Weight: 140 kg (242 lb) -Available immediately in our stock

S. No.: 3011747 Equipment / Additional information: Volt: 230 // Hz: 50 WITH PEDAL Condition: doesn’t work properly, needs service

M. No.: 3704 Equipment / Additional information: Volt: 220 // Hz: 50 WITH PEDAL

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Size: 500 x 350 mmImpression: 11165626 Mio.Equipments:Accumulate & Folder ACF-30Stacker ST-401x VAC-600 Ha 3x VAC-600 HmThree knife trimmer HTS-30SSaddle stitcher SPF-30S 24 stationsU-shaped layout: Efficient space utilization and easy monitoringInline production from collating to finished productVariable data processing: Handles personalized prints and variable page counts, ideal for digital printingFully automatic format adjustment for quick job changesTouchscreen for user-friendly operation, even for less experienced operatorsSheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mmPaper weight: 40-350 gsmProcessing thickness: 8-200 pages (max. 5 mm spine thickness)Production speed: Up to 5,500 booklets/hourStitch distance: 60-150 mmTrimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mmTrimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mmPower supply: 400V / 50HzSpace requirement: Min.  ...

NM 414 Grooving Machine Heavy-duty grooving machine for manual operation, designed for grooving cardboard from 0.6 to 4 mm using the compression-bending principle. Coupling-free drive controlled by a frequency converter Built-in piece counter Thanks to an innovative drive concept, grooving is performed in a single stroke Working width: 440 mm Groove width adjustable from 4–12 mm Front work table 45 cm long with 2 scaled T-slots and 2 guide rails Rear work table with belt discharge Grooving on the top or bottom side depending on the tool’s mounting position Power rating: 1 kW, 3-phase 400 V Standard configuration: Grooving tool with movable bending jaws and height-adjustable grooving blade. Very good, like-new condition

Size: 166 x 211 mmEquipments:Full Automatic line of High Die Cutter for Cards (Business, Phone, Loyalty, Membership), Labels, ticketsST-18.02 Strip stock feederSE-18.2 Infeed and Cross Cutter with Automatic ProgramD-18 Die Cutting Punch Unit with 2 chasesPB-18.1 Banding machine with deliveryStrip length min./max. : 350/1130 mmStrip width min./max. : 45/180 mmPrecut label size min. : 25x45 mmPrecut label size max. : 150x180 mmDie cut size min. : 20x41 mmDie cut size max. : 145x175 mmStack heigh min./max. : 45x125 mmMin. trim per side for die cut : 2 mmIntermediate trim cut : 3 mm / 22 mmHeight of cutting die : 60 - 100 mmMecanical Speed : 10 - 15 strokes per minuteDie Cut Pressure : 4 - 5 TonsBanding machine, width : 25 mmMachine is controled with program and screenElecrical datas : 380V, 50 Hz, 6.8 KW, 16 Amp.Air supply required : 6 bars dry air (30 - 45 m3/h) incl. 30% reserveDimensions ...

Size: 320 × 550 mmEquipments:Sheet feeder:Two drum feeders with gripper systemBelt conveyor channel for product conveyingSurface with rice paper structure to protect the productFront stop made of aluminumSide guides with sorting screws for sheet positioningScrew ejector for precise bow positioningSheet control system:Double sheet inspection using mechanical thickness measurementMisaligned bow detection using photocellPhotocell-controlled activation of the second feeder and glue injection timingGlue unit:Hot melt or cold glue application (configurable)Glue injector with digital keyboard settingDelivery:Double roller press station for optimal adhesionInclined conveyor belt for shingled product stacking at the exitControl system:SPS control unitTouchscreen control panelSafety system with light barriersTechnical data:Min. Format 100 × 150 mmMax. Format 320 × 550 mmMax. sheet thickness 5 m ...

Size: 0x0

Size: 0x0

Size: 1360 x 1200 mmEquipments:Fully automated palletizing of loose stacks and solid containers at a speed of up to 1,800 stacks/hrAutomatic Palletizingproduct infeed via accumulating conveyorPallet dimensions: 1360 x 1200 - 1000 x 800travel stop for dropping of very smooth productspallet removal in moving directionPallet sizes 1,360 x 1,200 or 1,000 x 800mmSpeed 30 Stacks/min

BOSTON 4 head flat and saddle stitching machine double wire

BOSTON 4 head flat and saddle stitching machine double wire

Melton hotmelt adhesive appllicating system.

Inserting Machine Neopost (Quadient) DS200 Configuration: Inserting System DS-200 Tower Feeder 2 with reading Inserts Hatchet feeding with reading Storage Tape Fsbrqbgjyttidsv Iofw Machine permanently in maintenance contract until 31.1.2026 ! Last machine maintenance in 12/2025 ! Little walked.

Eyelet machine Piccolo for sale Sell a Piccolo eyelet machine in good, working condition. Ideal for inserting eyelets in paper, cardboard, leather or plastic. Easy hand operation and stable design. Inspection and test possible.

HS Heiber + Schroeder WP 11 D - window patching year 1991 in production good condition

Condition: Very good condition

Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; one roller; used for cold glue.

Block size press Müro A3 2000/TM; cleaned and tested; Tabletop device; 2 dryers; insertion width 525mm; Insertion height 200mm. Pading press Müro A3 2000/TM; cleaned and checked; two heaters; working width 525mm; working hight 200mm.

Bielomatic Collator Year : 1991 5 stations, dual-purpose Gluing Unit HHS crimping and Multiflex on both sides Numbering: yes

2x Hohner stitching heads for omega loop. In excellent condition. For Duplo and Horizon booklet makers, etc.

Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.

semi-automatic packaging aid for folder-gluers, boxes, folded flat: max. 400 mm, min. 50 mm, length of the boxes: max. 500 mm, min. 100 mm, standard, right-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, box types: ordinary folding boxes 4+6 dot boxes, with or without lid. Overhaul 2025: cleaned, checked, painted, new belts and belts

Camera module, max. passage width 650mm, max. 420mm camera scan width, own drive with servo motor, vacuum transport belt at the top, module length 800mm, order evaluation and documentation, connection to HHS quality assurance system possible.

Edge banding machine Sumbel Perkeo 150; Working width 150mm; suitable for cold glue. Edge gluing machine Sumbel Perkeo 150; workind width 150mm; used for cold glue.

Tünkers KBA 120 edge banding machine; cleaned and tested; Working width 120mm; suitable for cold glue. Edge gluing machine Tünkers KBA 120; cleaned and checked; working width 120mm; used for cold glue.

Size: 800 x 600 mmEquipments:Good condition without any damage

- Banding machine - desk model

2x feeder units for the printing of envelopes. Includes CD and manual. Available immediately and in very good condition.