We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
(3rd category level)
Manufacturer:
(Category: 836)
used
M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm
used
Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available
used
Schmedt - PräRund - PräDeck - PräKant - Concise, in good condition, immediately available
used
various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available
used
used
used
Edge banding machine Sumbel Perkeo 60; good condition; cleaned and tested; Working width 60mm; 1 roller; suitable for cold glue; new table; new glue basin; new roller; new clutch. Edge gluing machine Sumbel Perkeo 60; good condition; cleaned and checked; working width 60mm; one roller; used for cold glue; new table; new glue reservoir; new scooter; new clutch.
used
used
S. No.: 12991843 // Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print Modes: Draft, Letter, Executive Documentation
used
Size 360 mm Details Joint burning Available Direct
used
Width 500 mm Options with board attachment up to 8 mm, for PVA glue Available Direct
used
Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm
used
Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A
used
Size 400 x 550 mm Height 160 mm Details Semitautomatic with timers Speed 40 cycles per minute Shrinking tunnel Beck shrinking tunnel
used
Equipment: Transnorm belt conveyor 90 degrees Left version, bandwidth 60 cm, height approx. 86 cm, Drive 400V
used
Multigraf MCM-48 creasing and perforating machine Specifications MCM-48: Manual of the material feed Minimum format, mm 80x100 Maximum format, mm 480x500 Material density, g/m2 80-500 Dimensions, mm: 1100 x 605 x 300 Power supply: 220 V
used
used
used
used
Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:
used
Collator Year ca. 1988 20 Stations Collator, with Stiching Unit and Trimmer
used
used
Hohner Economy 25/40 wire stitching machine; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with the clamp folded down, 40mm with the clamp not folded down; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.
used
Make PB&E Model Meteor Year 1980 Size of the plate 420 x 510 mm Foil transport both longitudinally and transversely Condition machine is currently being refurbished Details automatic foil transport (adjustable foil pull) adjustable dwelling time, adjustable embossing time
used
Make Duplo Model Ultra 205A Year 2010's Min size 210 x 297 mm Max size 521 x 710 mm Substrates 120 - 350 grams Speed 10-40 meters per minute (roughly up to 4,500 A3 sheets per hour) Feeder SF-205 Automatic suction feeder Details batch counter, cleaning function, air knife, touch screen controls, set up by the computer
used
Make CMC Model Q-Joint Year 1995? Working width 500 mm Thickness up to 80 mm Details Foot pedal operated
used