presses: other used for sale (231)

Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

Size: 530 x 740 mmEquipments:Color magenta 20 piecesColor Yellow 7 piecesColor Cyan 6 piecesColor black 6 piecesInk duct foil 80 piecesBlade4x ink rollersexchange partsvarious machine parts for Heidelberg CD 74

Size: 480 x 650 mmEquipments:1 X Inking Unit1 X Numbering Shaft2 X Mounting Rings2 X Linear Perforating Arms

Size: 520 x 740 mmEquipments:1 cam left and right2 X Mounting Rings2 Perforating arm1 X Inking Unit1 X Numbering Shaft

Size: 700 x 1000 mmEquipments:Width 160 cmLength 170 cmMaximum frame size 1125 x 1500 mmMaximum printing size 700 x 1000 mmMaximum sheet size 885 x 1250 mmOff-contact variable 3 - 28Air consumption 6 bar, 20 nl/minSqueegee speed m/sec 0,2 - 1,2Squeegee angle adjust 75 - 90ºElectrical connection 230 V, 50 Hz, 1ph+N+Pe, 3 kWFine register adjustm +20 / -20Max. stock thickness 25Machine weight 435 KGMax. nr of prints/hour 850semiautomatic screen printing machines

Dry Rotary Vane compressing+blowing pump Make Becker Model DVT3.80 Year 1998 Capacity 80m3 Available Direct

Dry Rotary Vane compressing+blowing pump Make Becker Model DVT3.80 Year 2001 Capacity 80m3 Available Direct

Compressor Make Whispair / Contimeta Model unknown Year unknown Volume/c apacity unknown, but assumingly around 250-300 liter per minute (Conservative number) Pressure 8 bar Tank 100 liters? Details 2 oil free cilinder pumps, a so called silent silent and this in a silence reduced cabinet. Available direct

Inv. Num. : 8326 Type: STAR G2 Producer: SPS VITESSA Created: 2003 Parameters: Maximum format size: 102 x 72 mm Equipment: ULTRATERM UV/HAC drying tunnel

Hazar Makina HM625 Transfer Printer Year of construction 2021 Model 600 Print width: 2000 mm Diameter of the calender cylinder: 625 mm Electrical power: 40 kW. Electrical power in one hour: 18 kW Heating system: Fuel oil (surface heat distribution is even.) Machine Control Panel: 7 inch LCD PLC System Cooling System: Automatic Resistance power: 30 kW Engine power: 2.2 kW Heat-up time: 70 minutes Sealing Clamping and Guide System: Automatic (Pneumatically Controlled Linear Slide) Heat control of cylinder: Outer and inner surface double automatically checked. Printing speed: 3-7 meters in minutes Felt: Nomex Item Condition : Exhibition Piece

Uras 3 Head Printer Large Format Printer Printing Machine 3 x 4720/3200i, 2400 dpi  3 heads: 1800mm Thanks to the high-speed printhead with new technology, you can achieve high-performance results at low production costs at a speed of 110 m²/hour in 2Pass printing mode. 3 x 4720/3200i printheads with 2400 dpi high resolution 2-stage ink unit (220 ml ink cartridge and 1.5 l ink tank) Housing-integrated heating & infrared heating & fan system Unwinding spindle to avoid paper bubbles Printing up to 600 meters with tension winding system 2pass (360x1200 dpi) 110 m²/hour Specifications Print head: Piezo print head 3 pieces (3200i/4720)         Media: Width: 1820mm  Thickness: 1mm or less Weight: up to 60kg Maximum printing width: 1800mm Colour unit: 4 x 220 ml cartridge and 1.5 Lt paint tank Print resolution: 2400 dpi Printing Modes: 2 passages (360 x 1200 dpi)  ...

- Drill diameter: 3-10 mm (optional up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable between 45 mm and 540 mm - Hole spacing: Min. 3 mm, Max. 800 mm - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed regulation

Number of drill heads: 4 Drill diameter: 3-8 mm Drill distance: 36-260 mm Stacking height: 60 mm Number of revolutions: 1800 / min

UV drying system for drying varnish or inks in a printing machine Lamp type T1100 K3H, With heat exchanger cooling capacity 17 KW Composed of: lamp unit, Switching and control unit; Exhaust fan unit Water and heat exchangers

Intermec PC43T label printer in as new condition, with barcode print software and hardware(Dell Thinkcentre M series), with repro materials: thermomark ribbon 9 pieces. Can ship world wide.

This Linotype model 16A, still in print shop and running on continual basis. In original condition. Second owner more than 40 years. Including 5 magazines for letter format from 6 to 12 points, all serial tools and original brushes for cleaning and spare part manual.

Ryobi INK volume setter software package with hardware, software CDs and dongle.

New offset paper is original packaging, ca. 3100 kg.

Thermal press machine HIX Basic B 400 in production ready condition.

4 printing inserts(cassettes) for Muller Martini Grapha Progress 520 format : 25.5". No damages, in very clean and good condition, ready for production. Pitch 1/4 " Blanket cylinder is clamped. Loaded on wooden pallets. Can ship worldwide.

Designjet T2300 PostScript eMFP

PRECISION SCALE M. No.: WD080052457 Equipment / Additional information: Max: 36 kg / d=10g

Pad printing system ( 5 x MSC 100 in-line design ), a linear system with upstream parts supply (automatic mint card feeder) Drying tunnel Stacking device

Nipping press - manual Make Robust Model FNP500 Year 1980´s Width 500 x 250 mm Options up to 100 mm thickness Available Direct

Nipping press - manual Make Krause Model FNP500 Year 1980´s Width 500 x 250 mm Options up to 100 mm thickness Available Direct

Nipping press - manual Make Hunkeler Model FNP500 Year 1980´s Width 500 x 250 mm Options up to 100 mm thickness Available Direct

bookpress Make Francis Donnison Model 7050 Year 1900's Size 500 x 700 mm Stack up to 95 cm Available Direct

DIGITAL LABEL PRINTING MACHINE Ser. No.: VP320C46009320240131V002 Equipment / Additional information: Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24 ...