saws used for sale (1,244)

Qty. 1 Second-hand V-cut saw line with PE film packaging line with PE extrusion Mfc.: Emmegi, Moretto Type: Saw: V-Cut - EST D46 Built: 2004 Min./Max profile length: 1500 – 7000 mm Consisting of: Saw line PE extruder Film packaging line with feeding device and stacker Connected power: 25 kW, 400 V, 50 Hz Control voltage: 24 V

A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible.

roll diameter: 420 mmthroat: 410 mmsaw band length: 3150 - 3260 mmsaw band width: 3-16 weight: ca. 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm

Aluminium circular saw, semi-automatic aluminium underfloor circular saw for mitre cuts 0 to 67.5 degrees to the left and right - Machine with solid cast construction - Large solid rotary table - 7 main angles with fixed stops - Mitre 0 to 67.5 degrees left and right - 2 pneumatic vertical and horizontal vises - Two-hand safety control - Infinitely adjustable saw blade feed Great condition, machine hardly used. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Saw blade: 500 mm Colour: blue/yellow Total power requirement: 380 V Weight: 550 kg Dimensions: 1140 x 1150 x 1740 mm Speed min./max.: 2860 Cutting area at 90 degrees square 160 x 160 mm Cutting area at 90 degrees rectangular 260 x 100 mm Cutting area at 45 degrees square 145 x 145 mm Cutting area at 45 degrees rectangular 185 x 100 mm Angle a ...

cutting diameter: 290 mmsaw band length: 4000 x 27 x 0,9 mmtable height: -- mmcutting width: 300 mmband speed: 20 - 100 m/minload centre: 290 mmrotary disc high: 290 x 300 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 280 x 240 mmheight of the workpiece: 1800 x 1900 x 1750 mmweight of the machine ca.: 2200 kg- Fully automatic electro-hydraulic band saw- electric feed unit - max. feed 520 mm- front control panel- electro-hydraulic material clamping- semi-automatic & automatic mode selectable- Miter cuts - Automatic operation up to 45° right- Miter cuts - Semi-automatic operation up to 60° right- stepless adjustment of the saw blade speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A semi-automatic horizontal bandsaw Knuth is available. Miter range: 0°-60°, min. cutting range: 25mm, max. cutting diameter: 325mm, max. cutting diameter X/Y: 400mm/315mm, saw band speed: 100m/min, saw band dimensions X/Y/Z: 4380mm/34mm/1.1mm. Machine dimensions X/Y/Z: approx. 2150mm/2150mm/1650mm, weight: approx. 1800kg. An on-site inspection is possible.

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

GENERAL Project No.: 905819 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 540 BG Control: Siemens S7 Year of construction: 2024 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 63 A NOTE Combined saw-drilling-tapping machine with vertical drilling unit for e.g. combination tool for drilling and tapping up to 8 profiles at the same time (for aluminium machining, etc.). Cutting area approx. 400x58 mm with new 500 mm saw blade. 2x 4 spindle drill head to accommodate 4 tools each, distance of the spindle 35mm, distance between the sets of 4 spindles, 80mm. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ.  ...

GENERAL Project No.: 905818 Quantity: 1 pcs. Manufacturer: PRESSTA-EISELE Type: Profilma 502 ST-V Control: Siemens S7 Year of manufacture: 2023 Condition: Used machine GENERAL TECHNICAL DATA Air connection 6-8 bar Mains fuse 16 A NOTE Combined saw and punching machine with vertical punching unit (for aluminium processing, etc.). Max. saw height approx. 95 mm with new 500 mm saw blade. Punching process via a hydraulic cylinder vertically from above, punching stroke max. 20 mm, punching force 300 KN, cycle time per double stroke (forward-back) 2 sec. The machine has only been running for a few hours and is virtually in new condition! We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as ...

Key data: 380 mm

Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation

Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant systemfor all kind of metals, steels and Nirosta, quick clamping viceautomatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability.CE conformTechnical Data:Motor: 400V,50HzReduce gear rate: 25:1 Wheel diameter: 380mmBlade size: 3160x27x0.9mmBlade speed: 34 or 68 m/minCutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°RCoolant pump: 400V, 50Hz, 3~, 25WPacking size: 1770x765x1120mmWeight: 365 kg

Demonstration machineYear of manufacture 2021Hans Schreiner metal band saw with swivel arm, for professionals, with soft hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel. Quick-release vise. Choice of automatic operation and manual operation can be easily switched. Automatic belt shutdown, price with base, reinforced frame for more stability, CE compliantTechnical data:Motor output power up to 1.9kW S6 (1.5kW S1)

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Sawmill with log band saw with flywheel 1000 mm Attachment to clamping carriages with pliers

Nikmann Log Band Saw, Model HBB 550 L Maximum cutting diameter: D 550 mm max. board width 530 mm max. cutting length our standard 6 m Track length 6.9 m Maximum saw blade stroke: 540 mm Minimum saw blade height from track: 20 mm Saw blade dimensions: 3200 x 27 x 0.9/1.0 mm Recommended band saw blade FB for softwood X Cut with every 3rd tooth with stellite Maximum cutting thickness: 220 mm Cutting length: 6 m, expandable in 2.3 m increments Minimum cutting length: 0.9 m Engine power: 4 kW/5.5 hp Flywheel diameter: 400 mm Flywheel width: 25 mm Saw blade dimensions: 3200 x 27?33 x 0.9

Cutting height 160 mm Cutting width 380 mm Table size 400 x 460 mm Table inclination up to 45 Wheel diameter 220 mm Motor 1 HP - 750 watt Weight approx. 45 kg

For logs / logs, the BBS750 machine is a loyal partner. The performance of the sawmill depends on the thickness of the planks and beams. However, the average volume throughput can be estimated at 1-1.5 cbm/h. The Bockbandsäge Bochsäge sawmill is used by forest farmers and other wood processors and is used as an entry-level saw. Technical data: - Weight: approx. 600 kg - Machine dimensions: width approx. 220cm - height approx. 170cm  - Total length:600cm (in standard version but also extendable) - Cutting length: 480cm - Main motor power: 5.5kW - Power requirements:

Angle system for panel dividing 4300 mm x 2200 mm Year of manufacture 2000 Ex-works not dismantled (lombardia)

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

cutting diameter: 410 mmsaw band length: 5800 x 41 x 1,3 mmtable height: 750 mmcapacity 90 degrees: flat: 700 x 410 mmcapacity 45 degrees: round: 410 mmcapacity 45 degrees: flat: 500 x 410 mmcapacity 45 degrees: round: links 410 mmcapacity 45 degrees: flat: links 430 x 410 mmcapacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/minworkpiece weight: max. 250 kg/m kg: 5,5 kW: 3200 kg: 4500 x 2800 x 2000 mm- The ergonomic panel control can be networked and offers various optionsOption packages Teleservice for remote maintenance Setting sawing programs in the AV Import of sawing programs from CAD with DSTV interface and data export- Automatic material feed:- In a compact design for shorter sections or with flexible insertion tongsAvailable in almost all lengths- Exact positioning of the material using servo positioning technology- Pioneering electric saw feed with ...

Year: 2018 technically efficient, ready to work – after full service motor power: 2.2 kW disc diameter: 400 mm (cross-cut) machine head can be moved 45° to the right and left head tilt 45° to the left pneumatic profile clamps pressure reducer cooling system

cutting diameter: - mmsaw band length: - mmcutting width: - mmtable - swivable: ja Gradweight of the machine ca.: 200 kgdimensions of the machine ca.: - mwith welding equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 400 mm Cutting range round: 130 mm Rectangle: 305 x 40 mm mitred at 45° round: 130 mm Rectangle: 245 x 40 mm 2 cutting speeds by pole-switchable motor: 9 and 18 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg Space requirement without roller conveyor: 1100 x 1000 x 1900 mm

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

dimensions of saw-band: 2950x27x0,9 mm: 15-100 m/min: 285 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: round: 250 mmcapacity 90 degrees: flat: 280x220 mmcapacity 60 degrees: round: 120 mmcapacity 60 degrees: square: 80 mmcapacity 60 degrees: flat: 140x100 mmcapacity 45 degrees: round: 230/200 mmcapacity 45 degrees: square: 200/170 mmcapacity 45 degrees: flat: 220x200/200x140 mmtotal power requirement: 2,2 kWWeight: 990 kgOverall size: 2500x2230x2050 mmAccessories / equipment:- Discharge roller conveyor with pneumatic stop, 350 mm wide, digital, length 7.000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.