saws used for sale (1,283)

Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH

Lg.Nr. 24029 Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Material replenishment machine - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

Lenght 6 m E355 positioner controller Saw diameter 420 mm

capacity 90 degrees: round: 300 mmcapacity 90 degrees: square: 330 mm: 400 x 310 saw band length: 3820 x 34 x 1,1 mmband speed: 22 - 88 m/mintable height: 930 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 2,22 x 1,2 x 2,1 mDouble miter band saw, hydraulic semi-automatic• miter left 60° + right 45°• Industrial hydraulics, powerful 18 bar• Best access to the material• Ammeter to check a.- Optimization of cutting force- Tape life- cutting course• Vise closes/opens hydraulically• Material turntable with ball bearings b.• Adjustable quick-release• Material height sensor Semi-automatic function:1. Clamp material2. Saw starts3. Rapid lowering to the start of the material or the same for series cutting cut4. Saw band off5. Raise the frame to just above the material6. Open the viseThe data for this ad was created with ModulMWS ...

cutting diameter: 225 mmsaw band length: 2480 mmcutting width: max. 245 x 150 mmvoltage: 230 Vpower capacity: 1,5 kWdimensions of saw-band: 2480 x 27 x 0,9 mmmitter cutting: 0 - 60 °cutting speed: 20 - 90 m/minweight of the machine ca.: 185 kgdimensions of the machine ca.: 1,4 x 0,69 x 1,7 m- stepless speed- stepless feed- miter cut- Bi-metal saw band- Material stop- Machine base- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 275 mmcutting diameter: bis 90 mmcutting range flat: 120 x 75 mmturning speeds: 40/80 U/minmiter cut: 45°/90°/-45° °weight of the machine ca.: ca. 150 kgManual saw blade feedAccessories:Coolant deviceUnderframe with 2 drawersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 315 mmdimensions of saw-band: 3460 x 1,1 x 34 mmcutting speed: 35 / 70 m/mincutting width: 400 x 250 mm: 250 / 280 mmImpact energy: 220 / 280 mm: 180 mm: 140 mmconnected load frequency: 400 Volttotal power requirement: 2,2 kWweight of the machine ca.: 0,6 tdimensions: 2,1 x 1,0 x 1,5 mSemi-automatic miter band saw- Miter cuts up to 45° left + right- Miter cuts up to 60° right- Vice with quick release device- Tape tension control via manometer- Electr. automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mmcapacity 90 degrees: round: 100 mmcapacity 90 degrees: square: 100 mmcapacity 90 degrees: flat: 100 x 195 mmcapacity 45 degrees: round: 100 mmcapacity 45 degrees: square: 100 mmcapacity 45 degrees: square: 100 x 135 mmsaw blade turning speeds: 2800 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 250 kgdimensions: 0,7 x 0,7 x 1,4 mATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 2950 x 27 x 0,9 mmtable height: ca. 800 mmband speed: 36/72 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,37 tdimensions of the machine ca.: mMEP sawing machine:Saw band bow, vice unit and base made of durable cast ironPrecision grade marking on the cast iron structureElectrical system (with fully identifiable electrical wiring andLow voltage system 24 V)Switch handle IP 55 for manual cycles (if available)Rotating scraper brush for the saw bandClamping unit with vice for quick approachAccurate stops with adjustment for miter cuts at 0°, 45°, 60° leftBi-metal saw band 2950 x 27 x 0.9 mmKeys, instructions for use and instructions for ordering spare parts in theUser languageSHARK 281 with manual operation and SHARK 281 CCS with manual operation and cuttingwith automatic head feed by its own weight.CCS (Cut Control System) w ...

capacity 90 degrees: round: 255 mmcapacity 90 degrees: square: 240 mm: 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mmtable height: 870 mmband speed: 18 - 110 m/mintotal power requirement: 1,5/1,8 kWweight of the machine ca.: 0,63 tdimensions of the machine ca.: 1,8 x 1,85 x 1,85 mMiter band saw, fully automatic GBS 250 Super VA-I MPS• Miter left. 45° automatic operation• Miter left. 60° semi-automatic operation(cuts without programming)• Shockproof and ergonomic control panelwith oil-proof EPDM cover a.• Material height sensor c.(Automatic cut start detection)• Frame and gearbox made from one piece,very quiet cutting and very low vibration• Chip tray can be removed (disinfection)• Easy access to the saw, material and feed unit• Foldable safety cover• Fine feed adjustment• Semi-automatic. Cut!Saw automatically with microprocessor controlAdjustable for 2 program l ...

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mSPECIAL PRICE!Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic coolingShare of freight costs 120 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mmcapacity 90 degrees: square: 640 mm: 1250x600 mmcapacity 45 degrees: round: 680 mmcapacity 45 degrees: square: 600 mmcapacity 45 degrees: flat: 870x600 mmcapacity 60 degrees: round: 580/550 mmcapacity 60 degrees: square: 530/450 mmcapacity 60 degrees: flat: 550x450 mmsaw band length: 8140 x 54 x 1,6 mmband speed: 15 - 90 m/mintable height: 855 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,3 tdimensions of the machine ca.: 5,75 x 4,2 x 2,75 m2-column double miter band saw for quick cuttingwith pusher system P15. Option P30Hydraulic saw frame lowering• NC controlled• Automatic angular positioning from + 60° to – 60°High quality automatic miter adjustmentSpecial development for cutting profiles and beams.The highest positioning accuracy is achieved via the new B&S positioning system”.reached. An intelligent NC control ensures smoot ...