used Table Drills for sale

Description: Serial  , ,Number: 95088 Main engine power: 37kw Spindle speed: 4 to 2000 rpm Nominal spindle speed: 177 rpm Cone : KOMET ABS 125 Outer diameter: 280 MM Strokes: 1600x3500x1500 mm Feeds: 3 to 5000 mm/min Rapid feeds: 10.000 mm/min X: 62/3000Nm Y:58/2000Nm Z: 62/3000Nm Installed power: 125 kva  ,weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 14,000 x 5,000 x 4,000 mm

spindle diameter: 127 mmx-travel: 2000 mmy-travel: 1000 mmvertical movement: 1300 mmtable-size: 1400x1250 mmweight of the machine ca.: 20 tDigital read-outUniversal milling headFace plateMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc ... 31i - B Spindle diameter ... 110mm Axis X ... 2200mm Axis Y ... 1600mm Spindle speed ... 35-3000 rpm IKZ... 20bar Axis W ... 550mm Axis Z ... 1600mm Magazine slots ... 60 BT 50 Table dimensions... 1250x1500mm table load ... 5000kg Axis B ... 0,001° Rapid traverse... 12m/min L x W x H ... 7750x4715x3700mm Machine weight ... 22500kg Operating hours - 500 Head Workpiece probe Renishaw RMP 60 Conveyor Tools The machine is in good condition, possible to test under electricity.

spindle diameter: 110 mmx-travel: 2.100 mmy-travel: 1.500 mmz-travel: 1.000 mmw-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVAWorking Spindle: - boring quill diameter: 110 mmspindle taper: DIN 69871 ISO 50 spindle power: 22 kWtransmission ratio: 2 turning speed range: 2.000 U/minclamping table: - max. workpiece weight: 4.000 kgsurface area: 1.100 x 1.300 mmfeeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/minfeed range W-axis: 0 - 10.000 mm/minrapid motion - x-axis: 10.000 mm/minrapid feed Y, Z, W-axis: 10.000 mm/mintotal power requirement: 22 kWweight of the machine ca.: 23.000 tdimensions of the machine ca.: 7,1 x 6,5 x 3,7 mEquipment.• CNC-control HEIDENHAIN 430• support bearing• manual milling head• coolant tank with pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mmx-travel: 2000 mmy-travel: 1200 mmspindle turning speed range: 6-1250 U/mintable surface area: 1400x900 mmspindle drive motor: 12 kWspindle taper ISO: 50 spindle travel: 800 mmdigital readout: z-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: 20 tdimensions of the machine ca.: 5x3x2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 40 tool ATC 20 bar spindle thru coolant Full cover Chip conveyor Fanuc 31iA controller Important Note - Angle plate and tool are excluded. Includes shipping to any major seaport in the world.x-motion: 3,000 mm, y-motion: 2,000 mm, z-motion: 2,000 mm, w - axis: 700 mm, table surface area l x w : 1,800 x 2,200 mm, weight approx.: 43,000 kg, Approx. Onsite Dimension. (l x w x h): 8,970 x 7,660 x 4,910 mm

spindle diameter: 160 mmx-travel: 4000 mmy-travel: 2200 mmz-travel: 1500 mm: 270 mmspindle turning speed range: 20-2000 U/minControl: Heidenhain type: TNC530i table surface area: 3000x1600 mmtable load: 40 tspindle taper ISO: 50 spindle motor: 50 kWT-slot - width: 28 mmnumber of T-slots: 9 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 5410 €: 111.99 €: 18 mm: MK 3 : 250 mm: (10) 245 - 355 - 490 - 71 U/min: M18 : 1030 mm: 600 mm: 1950 mm: 230 kg: 120 mm: 200 - 530 mm: 270 x 270 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEManual feedElectronic variator driveFixed base with t-slots, height adjustable and rotating headstockBase cabinet with doors and drawerLightning equipmentTool ejectorEmergency push buttonTurning sense selectorCE normsOptions:Tapping device (IR/RS) € 785,--Electronic speed variator incl. digital read out (VE+TAK) € 1.265,- A) 120 - 760 B) 170 - 1100 C) 400 - 2580 D) 600 - 3800 E) 950 - 6000 1/minDigital read out for depth € 620,-Base cabinet with doors and drawer € 1.245,-Coolant equipment € 880,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 6150 €: 127.31 €: 25 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: M22 : 800 mm: 600 mm: 1450 mm: 240 kg: 120 mm: 155 - 485 mm: 270 x 270 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEManual feedGear drivenFixed base with t-slots, height adjustable and rotating headstockLightning equipmentTool ejectorEmergency push buttonTurning sense selectorCE normsOPTIONS:Tapping device (IR/RS) € 785,--Electronic speed variator incl. digital read out (VE+TAK) € 1.245,-- A) 45 - 125 B) 125 - 370 C) 380 - 1070 D) 1100 - 3100 1/minDigital read out for depth € 620,-Base cabinet with doors and drawer €1245,-Coolant equipment € 880,-(Sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Spanien : 6340 €: 131.24 €: 30 mm: MK 3 : 250 mm: 65 - 3.060 (8) U/min: M22 : 800 mm: 600 mm: 1450 mm: 240 kg: 120 mm: 155 - 485 mm: 270 x 270 mm: 100 mmERLO(MADE IN SPAIN)FOR MANUFACTURING USEManual feedGear drivenFixed base with t-slots, height adjustable and rotating headstockLightning equipmentTool ejectorEmergency push buttonTurning sense selectorCE normsOPTIONS:Tapping device (IR/RS) € 785,--Electronic speed variator incl. digital read out (VE+TAK) € 1.245,- A) 45 - 125 B) 125 - 370 C) 380 - 1070 D) 1100 - 3100 1/minDigital read out for depth € 620,-Base cabinet with doors and drawer € 1.245,-Coolant euqipment € 880,-(Sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1200 mmy-travel: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 5,6x3,4x3,x7 mBrand: FemcoType: WBT-100SR2CNC brand: MitsubishiCNC model: Meldas C3Year of make: 1995-05Facing supportTable length: 1.440 mmTable width: 1.600 mmSpindle diameter: 100 mm øMachine dimensions (lxwxh): 5.680 x 3.400 x 3.700 mmincl. right-angle milling head type HuronThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X 2000 mm Y 1700 mm Z 1250 mm W 730 Spindle diameter 110 mm kwW/Nm (S1) 19.5/951 3000 U/min Table 1400 x 1600 mm, table load 10 t T-grooves 22H8 Control HH 640 HR 510 ATC 40 H Coolant 70 bar on the power unit, with paper belt filter and oil separator Fixed cabin Spindle support 250 mm ISO 50 Immediately available!

X 4000 Y 2500 Z 1500 W 800 Spindle diameter 130 mm kwW/Nm (S1) 4pinacles 2099 3000 U/Min. Table size 2000 x 2400 mm, maximum table load 20 t T-grooves 22H8 HH 640 HR 510 Movable cabin Z800 Y1800 Spindle support 250 mm ISO 50 Immediately available!

Description: Table: 15-ton load/0.001 degree indexing/Full C axis 18.5/22kw spindle motor 60 tool ATC Scales Spindle thru coolant Chip conveyor Fanuc 31iA control Includes shipping to any major seaport in the world.x-motion: 3,000 mm, y-motion: 2,000 mm, z-motion: 1,600 mm, w - axis: 700 mm, table surface area l x w : 2,000 x 1,800 mm, turning speed range: 2,500 rpm, weight approx.: 37,200 kg, Approx. Onsite Dimension. (l x w x h): 6,320 × 6,900 x 5,049 mm

spindle diameter: 105 mmx-travel: 1000 mmy-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: JuaristiType: MDR105 CNCCNC brand: HeidenhainCNC model: TNC145Year of make: 1983Table length: 1.000 mmTable width: 1.000 mmX: 1.000 mmY: 1.000 mmZ/W: 1.000 mmSpindle taper: ISO 50Spindle diameter: 105 mm øThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Well-maintained PAMA Speedmat 3 130 machining centre with tool and head changer. Control and Serial Number Control: HEIDENHAIN TNC 530 , Serial number: 33C07097 Working area Max. pallet table load capacity: 10,000 kg Table dimensions: 1,600 x 1,600 mm Work spindle diameter: 130 mm Axis travel Axis travel X-axis: 3,000 mm Axis travel Y-axis: 2,000 mm Axis travel Z-axis: 2,200 mm + W-axis max.: 700 mm Table rotation B-axis: 360° Axis speed and Power transmission Feed speed X, Y, Z-axis: 0.5 - 10,000 mm/min Rapid traverse X, Y, Z-axis: 25 m/min Spindle drive speed max.: 4,000 rpm , (the actual speed on the tool varies depending on the processing head) Automatic Universal Milling Head TU 30-360 (the milling head has never been used by the operator) Max. spindle power: 30 kW (from 300 rpm) Spindle torque max.: 950 Nm Spindle speed max.: 3,000 rpm Indexing A-  ...

spindle diameter: 130 mmx-travel: 1780 mmy-travel: 1660 mmControl: Heidenhain 355 total power requirement: kWweight of the machine ca.: 30 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mmx-travel: 3000 mmy-travel: 2000 mmz-travel: 1240 mmw-axis: 950 mm: CNC Radial face slide diameter: 700 mmturning speeds: 16-1250 U/minspindle drive: 30 kWtable surface area: 1420x2000 mmworkpiece weight: 12000 kgcontrol: Siemens type: 840 C radial face slide travel: 170 mmspindle drive: 42 kWturning speeds: 16-1250 U/minfaceplate speeds from - to: 4-315 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 100 mm x-travel 1600 mm y-travel 895 mm z-travel 800 mm Table area 1200x1000 mm Table load 4000 kg Spindle stroke 600 mm Speed 14-1500 rpm Feed 1.7-2400 mm/min Rapid traverse 2500 mm/min Total power requirement 9.7 kW Machine weight approx. 12 t Guide paths hardened Tool holders ISO 50 Machine is energized, Schematic

spindle diameter: 75 mmx-travel: 800 mmy-travel: 1300 mmvertical movement: 1000 mmspindle taper MT: 5 spindle turning speed range: 14-1500 U/mintable-size: 1000x850 mmweight of the machine ca.: 6.7 tMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 0,0 mmx-travel: 2000 mmy-travel: 1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: travels: X-axis: 10000 mm Y-axis: 3300 mm Z-axis: 1000 mm power: 30 kW spindle speed: 20 - 2500 rpm spindle taper: ISO 50 tool changer positions: 40 max tool diameter: 280 mm max tool length: 480 mm max tool weight: 30 kg x-motion: 10,000 mm, y-motion: 3,300 mm, z-motion: 1,000 mm, turning speed range: 20 - 2500 rpm, tool taper: ISO 50, total power requirement: 30 kW, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 11,000 x 5,000 x 5,000 mm

spindle diameter: 130 mmx-travel: 6000 mmy-travel: 1750 mmz-travel: 600 mmw-axis: 800 mmspindle taper: SK 50control: Siemens 8M type: 8M mmtable surface area: 1500x1300 mmTable load: . kgturning speeds: . U/minspindle motor: . kWfeed: . m/minchip conveyor: coolant: x-travel: mmtotal power requirement: . kWweight of the machine ca.: 75 tdimensions of the machine ca.: . mTool magazine: 60 toolsThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mmx-travel: 3000 mmy-travel: 2000 mmz-travel: 1500 mmw-axis: 700 mmspindle taper: ISO 50 control: Siemens type: 850 M mmtable surface area: 2000x1600 mmTable load: 12000 kgturning speeds: 12-3000 U/minspindle motor: 30 kWfeed: 0-6 m/minchip conveyor: coolant: total power requirement: 60 kWweight of the machine ca.: 40 tdimensions of the machine ca.: 8x6,3x5,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 4003 Type: FB 100 S Producer: SCHARMANN Created: 1969 Parameters: Digital display range: NEVAL C 80 Digital Measurement: Rod Runner NEVAL Work table length: 1100 mm Work table width: 950 mm X-axis travel: 1000 mm Y-axis travel: 1045 mm Z-axis travel: 1000 mm Machine height: 2555 mm Machine length: 4285 mm Machine width: 2915 mm Machine weight: 17 t

spindle diameter: 75 mmx-travel: 850 mmy-travel: 900 mmz-travel: 950 mmspindle taper ISO: SK 40 table-size: 1000 x 800 mmtotal power requirement: 16 kWweight of the machine ca.: 10,5 tdimensions of the machine ca.: 4,0 x 2,3 x 2,75 mIncluded- 3-axis digital display- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck

: gebraucht : 2000 : 3987 : prompt, Zwischenverkauf v : China : 980 €: 1 : 31,5 mm: MK 3 : 225 mm: 100 - 2900 U/min: 0,55 / 0,75 kW: 600 mm: 400 mm: 1850 mm: 175 kg: 150 mm: 300 x 300 mm: 100 mmWith standHeight adjustable tableOperating manual in German with EC conformity declarationDoes not comply with the german UVV and austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1120 mmz-travel: 1000 mmtable surface area: 1250x1120 mmspindle taper MT: 5 spindle turning speed range: 12,5-1600 U/minRadial face slide: 800 mmTable load: 3000 kgtotal power requirement: 12,5 kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6255 Type: ADF100-010 Producer: TITAN Created: 1977 Parameters: Work table length: 1100 mm Work table width: 130 mm Spindle diameter: 100 mm X-axis travel: 1600 mm Y-axis travel: 1200 mm Z-axis travel: 2000 mm Equipment: DRO 2 x Angle Tool Holder

Inv. Num. : 7325 Type: W 9 A Producer: TOS Created: 1983 Parameters: Work table length: 1000 mm Work table width: 1120 mm X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 1400 mm

spindle diameter: 100 mmx-travel: 1250 mmy-travel: 1120 mmz-axis: 1250 mmtable-size: 1250 x 1250 mmtaper: ISO 50 PDB total power requirement: 11 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mmx-travel: 1500 mmy-travel: 1250 mmz-travel: 1800 mmturning speeds: 7,1-1120 U/mintable surface area: 1200x1200 mmw-axis: 800 mmRadial face slide: 600 mmradial face slide travel: 200 mmTailstock: mmangular milling head: digital readout: Heidenhain total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 used Tischbohrwerk manufacturer: TOS Type: W75 1998. X-1250mm Y-900mm Z-1000mm W-560mm with 3-axis digital HEIDENHAIN Positip 855

Inv. Num. : 6254 Type: W75 Producer: TOS Created: 1987 Parameters: Work table length: 950 mm Work table width: 950 mm Spindle diameter: 75 mm X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 560 mm

control: Heidenhain 355 tool adaptor: SK50 weight of the machine ca.: 8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7268 Type: WFN 180 HSQ Producer: TOS Created: 2001 Parameters: Control system: Heidenhain 430 m Shrek Operating hours: 110727 h Maximum spindle speed: 24000 1/min X-axis travel: 2500 mm Y-axis travel: 2000 mm Z-axis travel: 1240 mm

Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50

Inv. Num. : 7273 Type: WH 10 NC Producer: TOS Generated:- Parameters: Work table length: 1120 mm Work table width: 1000 mm X-axis travel: 1000 mm Y-axis travel: 900 mm Z-axis travel: 630 mm

Inv. Num. : 5549 Type: WH 10 NC Producer: TOS Generated: 1991, GO 2016 Parameters: Control system: Heidenhain Work table length: 1120 mm Work table width: 1000 mm Maximum spindle speed: 1250 1/min Travel X-axis: 1000 mm Travel Y-axis: 900 mm Travel Z-axis: 630 mm Spindle diameter: 100 mm Machine weight: 13400 kg Equipment: Clamping angle

Inv. Num. : 7266 Type: WH 13 Producer: TOS Created: 1972 Parameters: Work table length: 1800 mm Work table width: 1600 mm X-axis travel: 1250 mm Y-axis travel: 2200 mm Z-axis travel: 1700 mm Equipment: 4x extensions in the length of 4x1 m 8x tracks for 1000 mm extension Turntable New ball screws and bearings Tools & Equipment

Inv. Num. : 6037 Type: WH 63 Producer: TOS Created: 1970 Parameters: Work table length: 900 mm Work table width: 800 mm Cone: MORSA Equipment: Front panel Lifting device (125 kg)

Inv. Num. : 6528 Type: WH 80 Producer: TOS Created: 1966 Parameters: Spindle diameter: 80 mm Cone: Morse 5 Equipment: DRO Vice Dörne Console (1000 x 500) The machine is in good technical condition.

Inv. Num. : 6710 Type: WH 80 Producer: TOS Created: 1964 Parameters: Working table length: 1090 mm Working table width: 1000 mm Maximum table load (uniform): 2500 kg Maximum spindle speed: 1400 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1250 mm Spindle diameter: 80 mm Machine height: 2550 mm Machine length: 5000 mm Machine width: 2500 mm Machine weight: 10850 kg Equipment: HE.

Inv. Num. : 6737 Type: WHN 11 Producer: TOS Created: 1970 Parameters: Working table length: 1250 mm Working table width: 1250 mm Maximum table load (uniform): 8000 kg Maximum spindle speed: 900 1/min X-axis travel: 1600 mm Y-axis travel: 1250 mm Z-axis travel: 1000 mm Spindle power: 34 kW Spindle diameter: 110 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t

Inv. Num. : 6345 Type: WHN 13.4.C Producer: TOS Produced: 1988 Parameters: Control system: MEFI CNC 836 Work table length: 2200 mm Work table width: 1800 mm Spindle drive power: 37 kW Maximum spindle speed: 2800 1/min Travel X-axis: 2000 mm Travel Y-axis: 1600 mm Travel Z-axis: 1200 mm Machine weight: 32.000 kg Replaced ball screw. Measurement of each ESSA axis separately. Drive for each XYZ axis.

Inv. Num. : 7270 Type: WHN 13.8 CNC Producer: TOS Created: 1996 Parameters: Control system: Heidenhain 426 C Hours: 145790 h Maximum spindle speed: 1500 1/min X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 1250 mm W-axis travel: 800 mm B-axis: 1600 x 1800 mm

spindle diameter: 130 mmx-travel: 3500 mmy-travel: 2500 mmz-travel: 1250 mmw-axis: 800 mmb-axis: 360 °spindle turning speed range: 1000 U/mintransmission ratio: 4 Control: Heidenhain type: 355 table surface area: 1800x2200 mmTable load: 12000 kgspindle taper ISO: 50 width of T-slots: 22 mmT-slot - distance: 160 mmFeed: 1-6000 mm/mintable rotating: 1,5 U.min-1total power requirement: 80 KVAweight of the machine ca.: 36 tdimensions of the machine ca.: 7,7x7,2x4,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.