thermoforming machines used for sale (69)

Age 1990, refurbished in 2003 Consisting of : With auto-start facility Unwind Stand Indramat Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, with delivery conveyor Inline Grinder with Blower EXW our Warehouse Enger, Germany, max. mateerial width: 730 mm, max. Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm

Age 1988:- Technical data ILLIG STAL 80 The ILLIG STAL80 can work Inline with any Thermoformer, or it can be used Off-Line as a stand-alone Trim Press. In Stock at our Warehouse in Enger, Germany, Punching table area max: 1000 x 510 mm, Material width max: 800 mm, Infeed length: 20 – 400 mm, Stroke height: 200 mm, Mold height: 272 mm, Punching pressure: 20 000 daN, Drive capacity: 4.16 kW, Total length: 3950 mm, Total width: 2385 mm, Weight approx: 3600 Kg

Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, 1 Marbach 8-cavity Ø95 PP cup tool year 2013 with Stacker Parts, Both Molds very sparingly used and in v. good condition, Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm

Age 2007, Consisting of :-, Siemens S7 PLC Controls Indramat Servomotor Siemens SINAMICS Motor Drive Rittal Control Cabinet Cooling Unit with Temperature Display With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production, This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line., Effective Working Area: 740 x 340 mm, Max. Part Height: 150 mm, Formed Part Stacking Length: 800 mm

AMUT - COMI FFG-760-ADV, Format area: mm. 750x550 (max. leaf width mm.900), Material: PET-PS-PP-PLA - XPS, Film thickness: mm. 0,2 - 2, Heaters: YES, Foil loading: automatic, Cycles/min: MAX AT EMPTY 60, ONE OWNER ONLY, Other details:, In production: yes, Can it be tested? yes, Availability to load it in a truck? Container?: price net of transport, machine loading and dismantling, Additional details:, 1.PRE-HEATING LEAF BLOWER ON SIDES FOR CHAINS, 2.ROBOT/MANIPULATOR AT END OF LINE WITH POSSIBILITY TO ROTATE FOR A/B TRAYS, 3.+ BASKET WITH BULKHEAD FOR CLASSIC EVACUATION, 4.LONG ROPE FOR EVAQUACING PRODUCTS, 5.CLOSING FORCE PRESS kN 300, 6.CLOSING FORCE CUTTING PRESS kN 600, 7.MAXIMUM LEAF WIDTH mm. 900, 8.MAXIMUM LEAF DIAMETER mm. 1200, 9.BOTH MACHINING OPERATIONS POSSIBLE (FORM AND DIE-CUT RESUMPTION / SIMULTANEOUS DIE-CUT FORM)

Age 1999, Consisting of:, Unwind Stand, Preheater ILLIG VWH72, Indramat Servomotor Indexing, Print Registering for Preprinted Film, Max. Film width 610 mm, Max. Thickness range 0.18 to 2.5 mm, Hardened Transport Rails, Double Heating, Heating Load 41.0 kW, Heaters move forwards automatically with pneumatic control, Sheet Sag Control, Form Area 550 x 400 mm, Forming & Punching in Mold with integrated Steel Rule Die, Positive Draw 20 mm, Negative Draw 20 to 40 mm, Trimming Force 50kN., Top and Lower Platens Moved by separate Indramat Servomotors, Heavy duty Toggles on both upper & Lower Platen, Stacking/ Counting Station, Waste Material Winder, Inline ILLIG RS75b Grinder with Blower, Suitable for PS, OPS, PP, PE, PVC etc., PLC: Siemens S5, PLC: Siemens S5, Max Film width: 610 mm, Form Area: 550 x 400 mm

Kiefel Speedformer KMD78 BFS Thermoformer with in-mold trimming using steel rule Knives., Age 2012, Suitable for PS, OPS, EPS, PP, PE, PVC, APET or CPET., Motor Indexing of sheet, Double Heating, Auto Transport Rail spreading for PP, Auto-sheet sag control, Film width max. 810 mm, Max. Form Area 760 x 540 mm, Max. negative/ positive Forming height 150 mm above and below sheet level, Dry Cycle rate 60 strokes/ min, In Mold trimming using Steel-Rule Knives, BFS Punching force: 650 kN, Machine equipped with: film Indexing, infrared heating (top and bottom), forming and in-mold punching unit, Inline SPEED STACKER Counter/ Stacker, residual film rewind, outfeed conveyor, manual removal, Siemens SINAMICS controls and touch panel HMI.

POLYTYPE BDM 482/ 920 upto 8-Colors, only 6-Color-Heads mounted, Cup Printing Line, age 2014 Consisting of:-, Inclined Conveyor Feeder (acts also as an Accumulator), Servo Motor Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System with Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UV-Top (Leutkirch, Germany) VARIUS Powerjet BIF 1/ 815, 8 kW, UV Curing-On-Mandrel, 6 x individually hinged dry-offset Print Heads. (2 Extra Print Heads can be retrofitted), Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain with Ink Stirer., Ink Washing System on Print Heads, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter S ...

Age 1989 Consisting of: Indramat Servomotor Indexing With auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Bosch-Rexroth Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump Inline ILLIG UG70b Counter/ Stacker, On Sale on a Special Price!, Film width: 700 mm, Form Area: 680 x 280 mm, Infeed length: 300 mm, max. draw: 125 mm

Description Offset Printing Machine for Cups - 4 Colors - Number of printing sectors 3 - UV drying with hot air - Inverter Drive - Production 16.000 Cups/h

Description Offset Printing Machine for Cups - 4 Colors - Number of printing sectors 3 - UV drying and Corona Treatment - Inverter Drive - Production 16.000 Cups/h

Description Wrapping machine

Description Offset Printing Machine for Cups - 6 Colors - Number of printing sectors 4 - UV drying and Corona Treatment - Inverter Drive - Production 16.000 Cups/h

Description Sheet thermoforming machine Max sheet dimension 1500x1000

Vacuum forming machine for the production of PS, PVC, PET, blister, tray packaging. The thermoformer works separately forming and punching. The machine is in very good condition and was only used as a back-up machine for 16 years. It has been cleaned and extensively tested. so that it is immediately ready for use. Currently, a tool for trays in the size 125x176 mm is installed (forming tool 3-fold, negative, top), tool size approx. 188x408mm. We are also happy to put you in touch with a very good toolmaker who can produce format tools according to your wishes. Equipment of the machine: Moulding area 350 x 500 mm Film width max. 540 mm Moulded part height max. 100 mm positive - Top heating longitudinal row control - Underheating longitudinal row control - Strip steel cut heating - Forming station pneumatic, undertable as cooling plate - Needle chain transport with servo  ...

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

# HIDROBRASIL 50 T Heating Press with Sliding Table (600x600mm) If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 50 T top piston heating press, in double column brackets suitable for continuous shift operation, with these basic data: - With a heating level - Idle speed up to 10 mm/sec (adjustable via rotary control) - Opening speed up to 40 mm/sec - Starting pressing speed 8 mm/sec - Table size/heating plate size 522 mm deep, x522mm wide - Plunger size/heating plate size 498 mm deep, x498mm wide - 2 heating plates, electrically heated, up to 200 degrees - Oil temperature monitoring - Circulating oil cooling on the hydraulics - Pressure Holding Valve 0 to 3600 sec - Pressure adjustment from  ...

Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...

POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.

Fully Automatic Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF integrated Flap-Folder & Carton Liner, age Dec. 2011 : OK-Corp Superformer Sf1 Carton Erector + Inline Superliner SL220-PFF with integrated Carton top Flap Folder & PE Film Carton Liner from a Roll of Film,. Full Stainless Steel Construction, age Dec-2011. Automatically Erects Cartons, tapes the bottom, Lines the Cartons with film from a Roll. Speeds upto 15 Cartons per/ min Siemens S7 PLC Controls Max/ Min. Carton sizes: Case-sizes.png

ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direc ...

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

The ENR series are air-cooled chillers for industrial use for outdoor and indoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Cooling capacity 13.5 Kw We have a lot of chillers available directly from stock used and new. contact us for a non-binding offer.

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

OMSO DM144/ 6 LIDS, 6-Color Lid Printer, only used for 26,000 hrs ! Infeed Conveyor for feeding Vertical Lid Stacks Robotic removal of Lids from stack to Print Conveyor Auto-Denester Unit No Lid no Ink and No Lid no Print System ARCOTEC CG20-2 Pretreatment station Main 6-Color Print Unit Speed Control for Ink Fountain Rollers Printing Roller self-cleaning device Max. speed 30,000 Lids/ hr (depending on Lid size & shape) Max. Lid dia. Ø 200 mm Min. Lid dia. Ø 50 mm Max. Lid Height 25 mm Max. Rectangular Lid size: 200 x 200 mm Max. Printing dimensions: 180 x 180 mm No. of Printing Blankets 4 UV Tunnel TUV 0077-99 UV-Tunnel power rating : 8 kW Main printer power rating: 20kW Polytype Counter/ Stacker unit delivers Counted Lid Stacks. 400 V 3phase, 50 Hz, Printing Plate Pre-registration Unit. with Monitor Display

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995