beverage machines used for sale (2,148)

Stationary sheet filter with quadratic filter elements in a row., Additional title: sterilisation filter, Capacity: 140 hl/h, Number of plates: 119 plates, Length: 7500 mm, Width: 1600 mm, Height: 2000 mm, Formats: Quadratic filter elements - 100 cm x 100 cm, Layer patterns: Vertical row arrangement of the filter elements

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement., Capacity: 60 hl/h, No. of plates - KG Filter: 34 Plates , No. of frames - KG Filter: 35 filter frames, No. of plates - sheet filter: 150 Plates, Length: 6500 mm, Width: 1000 mm, Height: 1500 mm, Formats: Quadratic filter elements - 60 cm x 60 cm, Base construction: Frame, Features: Manual filter element compression , Periphery: Kieselguhr dosing unit with dosing pump, Layer patterns: Vertical filter elements in a row

Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force., Capacity: 140 hl/h, Vessel volume: 26 hl, Length: approx. 4000 mm, Width: approx. 2000 mm, Height: approx. 3500 mm, Material: Stainless steel1.4541 (vessel), Base construction: on feet, Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology

Functioning yeast propagation consisting of 3 cylindrical tanks with jacket cooling. 1 tank is additionally equipped with a conical cooling and serves as a pure breeding tank for yeast production., Additional title: Yeast propagation plant with 3 coolable pressure tanks, Capacity: 32 hl, Pressure: 2 bar test pressure 2,6 bar, Width: 1,3 m, Height: 4 m, Weight: 500 kg, Position: vertical, Base construction: on 3 feet, Features: Operating yeast propagation system, every tank with cooling jacket,1 tank with additional cooling jacket for the cone, used as pure culture tank for yeast propagation , Periphery: After consultation we can equip the tank with the desired fittings.

Stainless steel tank with cladding, mounted on a transport frame., Additional title: Horizontal, cladded stainless steel tank, Capacity: 4000 l, Pressure: 0,99 bar, Length: 3,25 m, Width: 1,4 m, Weight: 600 kg, Material: stainless steel, Position: horzontal, Base construction: transport frame, Features: insulation, inlet DN 50, outlet DN 40

mobile kieselguhr filter from Velo, Additional title: with vertical filter elements; year of manufacture approx. 2005, Filter surface approx.: 5 m², Cos φ: 0,69, Rotational speed: 1656 1/min, Power: 0,55/0,66 kW, Current: 2,98/1,71 A, Voltage: 230/480 V, Frequency: 50/60 Hz, Length: 2,30 m, Width: 1,30 m, Height: 1,80 m, Weight: 1000 kg, Features: with receiving vessel, mixer, power unit and control

Open stainless steel tank with a lid., Additional title: Open stainless steel vessel, Volume: 14500 l, Length: 2300 mm, Width: 2300 mm, Height: 4000 mm, Material: Stainless steel 1.4301, Position: Vertical, Base construction: 3 x feet, Features: Lid; access ladder; float valve

Turbo Air Wort aeration DN40 mounted on frame, mobile, Additional title: Turbo Air; year of manufacture appr. 2000, Length: 1,30 m, Width: 0,60 m, Height: 1,30 m, Weight: 150 kg, Operation / Control: semi-automatic with push buttons on the control box and Siemens TD 390 display, Material: stainless steel, Base construction: mobile on 2 castors (frame), Features: 2-component jet; Siemens control panel TD390

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

Horizontal transport tank for beer with sight glass, manometer, manhole and outlet in the dished bottom. With slide rails and crane eyes, Volume: 4993 liter, Operating pressure: 2 bar bzw. 3 kp/cm², Position: horizontal, Base construction: on frame with guide rails, Features: sight glass, manometer, manhole, outlet in the dished bottom, crane eyes

Insulated and clad stainless steel pressure tank with various fittings., Additional title: insulated tank, Capacity: 12800 l, Pressure: 4 bar, Temperature: 20 °C, Length: 5,1 m, Width: 2,1 m, Weight: 2000 kg, Material: stainless steel, Position: hozizontal, Features: insulated and cladded, outlet DN65, manhole, 2 spray heads

CIP tank system comprising 3 tanks connected by pipes. The smaller tank is divided into 2 sections., Additional title: 3 rectangular containers with pipe connections, Gross volume insulated containers each appr.: 1300 l, Gross volume additional container appr.: 1000 l divided into two compartments with capacities of approximately 700 and 300 litres respectively, Material: stainless steel, Position: Vertical, Features: 2 x insulated containers + 1 x additional container (divided into two sections)

Horizontal stainless steel pressure tank with a heating coil and various fittings., Additional title: horizontal pressure tank, Capacity: 15000 l, Operating pressure: 4 atm, Operating temperature: 20 °C, Material: Stainless steel, Position: horizontal, Features: Internal piping for heating; level indicator; CIP connection; thermometer; sampling valve

Sheet filter with square filter elements hanging vertically, arranged row. Hydraulic filter sheet press. Control of the hydraulics from the built-in electrical control panel., Additional title: Sterilisation filter with 100 sheets of 100 x 100 cm, Operating pressure: 8 bar, Number of plates: 100 pcs, Plate area: 1 m², Length: 5,5 m, Width: 1,5 m, Height: 2,3 m, Operation / Control: Control cabinet with operating buttons, Material: Stainless steel, Base construction: Frame, Features: Hydraulic press; control panel

CIP system comprising three rectangular tanks with piping., Additional title: Cleanig system with 3 rectangular vessels, Capacity 1 x: 1000 l, Capacity 2 x: 2000 l, Length: 3,5 m, Width: 1,5 m, Height: 1,4 m, Material: stainless steel 1.4301 (AISI 304), Base construction: rectangular containers, Features: 2 x CIP vessel 20 hl; 1 x CIP vessel 10 hl; level indicator; manway, DN65 connections

15,000 litre DEFRANCESCHI MO 150 tank press Features: Volume 15000 L Length 6500 mm Width 2200 mm Total height 3000 mm Operating overpressure 2 bar Weight 4400 kg Horizontal design

Diaphragm Tank Press Features Length 7300 mm Width 2400 mm Total height 3000 mm Power / Energy / Capacity 15 Tons Description Dimensions press: approx. LxWxH: 7300x2400x3000 mm Dimensions auger: approx. LxWxH: 4050x1500x 730 mm

Mash diver / full diver RIEGER with overflushing device and sieve cylinder with cooling jacket and control system Features Volume 5300 L Material No. V2A Total height 6600 mm Foot height 2100 mm Cylinder length 1900 mm Outer diameter 1900 mm Description Topsoil: Clapper bottom with manhole round approx. 400 mm Cylinder: Tasting tap Threaded Socket DN65 Threaded Socket DN80 Threaded socket central DN80 Control in the control cabinet on the side Large outlet with slide Underbody: 4 spherical feet, height-adjustable with washers Tray with threaded nozzle DN80 As standard, the container has: Double jacket surface for cooling or warming The possibility of fully automatic temperature control Automatic control of the mash fermentation process

Mash diver / full diver RIEGER with overflushing device and sieve cylinder with cooling jacket and control in V2A outside Features: Volume 10,000 L Material No. V2A Total height 6300 mm Cylinder length 2400 mm Foot height 1200 mm Outer diameter 2300 mm Heating/cooling jacket design Description: Topsoil: Clapper bottom with manhole round approx. 400 mm Cylinder: Tasting tap Threaded Socket DN65 Threaded Socket DN80 Threaded socket central DN80 Control in the control cabinet on the side Large outlet with slide Underbody: 4 spherical feet, height-adjustable with washers Tray with threaded nozzle DN80 As standard, the container has: Double jacket surface for cooling or warming The possibility of fully automatic temperature control Automatic control of the mash fermentation process

12,500 litre RIEGER mash tank with cooling coils Volume 12500 L Material No. V2A Total height 3700 mm Total length 3500 mm Cylinder length 2400 mm Diameter 2250 mm permissible. Operating overpressure 2 bar permissible. Operating temperature 30 bar Description Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 f ...

Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 mobile CIP units Tank capacity: 100 L (alkaline + acid) Canning Line (Wild Goose GOSLING, 2021) Semi-automatic Formats: 0.33 L / 0.44 L / 0.50 L Cooling (Quantor Chilly MAX 50L) Glycol chiller for CCTs ...

Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET  Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of han ...

Overview This pallet labeler was manufactured in 2007 by the German company Logopak.  Manufacturer: Logopak Model: 920 PF Self-adhesive label for pallets. Label size: A5

Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with ...

Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right

Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available

Overview This glass bottle filler and capper was manufactured in 2017 by the Italian company GAI. The MLE 881 Bier model is designed for filling and capping beer and also wine in glass bottles with high precision and versatility. It supports crown caps, making it ideal for breweries and beverage producers handling different packaging requirements. The machine is in very good condition and ready for operation as it was only used from time to time due to low volumes, as the market was mainly can dominated. The machine can be shown in a test with water. Technical data Nominal Capacity: 1,500 bottles/hour (based on 0.33 L format) Bottle formats: max. bottle diameter is 115 mm, infeed screw works universal for bottles from 60mm to 115mm Closure types: Crown caps Filling system: Isobaric (for beer and carbonated beverages) Product types: Beer and other carbonated drinks Incl. dummy bottles and ...

Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...

Glass Triblock KOSME Modell Barifill RFC Filling System: Short Tube Filling System with 60 filling valves, 50 rinsing stations and 10head aluminum screw capper Year of manufacturing: 2013 Capacity: 0,33 ltr. glass bottles - 20.000 bph 0,75 ltr. glass bottles - 16.000 bph Pitch: 113 mm Control system: Siemens S 7 The complete line was fully refurbished in December 2025. Available from November 2026

11072026 Tunnel Pasteurizer Single Deck PETEK 15,000 Containers per Hour (2017) Available for sale is a PETEK single deck continuous tunnel pasteurizer, manufactured in Slovenia in 2017. The machine is designed for the controlled pasteurization of filled and closed beer cans and glass bottles and has a maximum nominal capacity of 15,000 containers per hour. The pasteurizer uses recirculated spray water to gradually heat, pasteurize and cool the containers as they pass through the machine. The process is automatically controlled through a Siemens PLC and HMI system, while PETEK Dynamic Active PU Control maintains accurate pasteurization levels and reduce the risk of over-pasteurization during production interruptions. The machine is built in five stainless-steel modules, making dismantling, transport and reinstallation more practical. With its wide 3,000 mm product conveyor, eight wat ...