- Custom-built spray dryer, housed inside three shipping containers.
This mobile unit could be set up as it is in a new location, or the
dryer could be installed within an existing building/site
- Fully automated and controlled via touch screen
- Consists of product tank, spray tower, cyclone, bag filters, inlet
and outlet fans, burner and control panels
- All contact parts 316 SS, suitable for drying of food or
- Spray tower height 4.5m, total height of containers: 7.5m,
footprint: 12m ...
200 tons ENGEL 2-shot tie bar less injection moulding machine with
rotary table on moving platen. Machine will be tested, repaired and
checked and can be shown under power !
ENGEL tie/bar/less 200 tons two component. Year 2002. rotary table
900mm diameter. 2 core pullers in fix platt, Neumatic Valves,
electronically mould flow meter Oni. 16 hot Chanel, 2 hydraulic
sequential. Machine reconditioned in our workshop of Santander, you
can see it working.
WORKING HOURS 70.000 ...
KRAUSS-MAFFEI KM 350/1900 C1 , año 2000 . This machine will be
delivered complete checked repaired and tested and can be shown under
Equipment: 6 core-pullers, robot interface.
CLAMPING FORCE 3.500 kN
YEAR OF BUILDING 2000
PLATEN SIZE 1.100 x 1.120 mm
DISTANCE BETWEEN TIE BARS (h x v) 710 x 710 mm
MIN. MOULD HIGHT 530 - 1.450 mm
TRAVEL OPENING 920 mm
DAYLIGHT MAX 1.300 mm
SCREW DIAMETER 60 mm
INJECTION PRESSURE 2.420 bar
INJECTION VOLUMEN 769 cm3
Vertical machining center CNC DOOSAN DNM 4500 was produced in 2016.
Technical data of the CNC milling machine:
- CNC control: FANUC 0iMF
- maximum feed, X axis: 800 mm
- maximum feed, Y axis: 450 mm
- maximum feed, Z axis: 510 mm
- rapid traverse, X axis: 36 m / min.
- rapid traverse, Y axis: 36 m / min.
- rapid traverse, Z axis: 30 m / min.
- servomotor, X and Y axis: 1.8 kW
- servomotor, Z axis: 3.0 kW
- spindle-table distance: 150-660 mm
- table dimensions: 1000 x 450 mm
- table load capacity: 600 ...
Automatic Continuous baking oven – for fully automatic production of
wafer sheets (refurbished)
- 18 cooking plates/baking tongs
- Plates dimension: 230 mm x 290 mm
- Baking plate. It is possible to produce simultaneously a wafer with
grid 5.0 x 0.8 mm and a wafer with grid 7.0 x 1.0 mm;
- Main drive with frequency- controlled three phase drive system
- 2 burners (Krom Schroder model ZKIH) with complete piping (forced
fresh air and gas), cutting and mixing valves, gas inlet Krom Schroder
with all accessor ...
Size 52 x 74 cm
Bacher register clamps
Chromed impression cylinders
59 mill. Impressions
Free of damages or repairs
Very well maintained
In full working conditions
4 Colors (straight)
IPC system (Integrated Press Control)
API II Control Console
SEMI APC (semi automatic plate change)
IR DRIER BALDWIN
Automatic rollers wash up device FASTWASH
Automatic impression wash up device
Automatic Blanket wash up device
Speed 16.000 sh
INK TEMP. ROLLERS CONTROL
MITSUBISHI DIAMOND DAMPENING SYSTEM
GRAFIX MEGATRONIC S
Original ONLY 115 mll turns (first owner)
Electronic doble sheet control
NON STOP feeder and delivery
TECHNOTRANS BETA C
The vertical machining center HAAS VF 3SS was produced in 2016, while
it was launched in 2018.
Machine technical data:
- X axis travel: 1016 mm
- Y axis travel: 508 mm
- Z axis travel: 635 mm
- distance between table surface and spindle: 102-737 mm
- table surface X x Y: 1219 x 457 mm
- maximum table load: 794 kg
- table design: T-slots T
- groove width: 16 mm
- distance between grooves: 80 mm
- mounting cone: 40 ISO
- maximum speed: 12,000 rpm.
- type of drive: direct
- maximum torque / at 2000 rpm ...
The horizontal machining center Mazak H 415 of the Japanese company
Yamazaki Mazak was produced in 1998.
- cnc control: Mazatrol M Plus
- overall dimensions of the machine: 3630 x 2870 x 2665 mm
- machine weight: 4700 kg
- number of pallets: 2 pcs
- pallet dimensions: 400 x 400 mm
- maximum workpiece weight: 400 kg
- maximum workpiece diameter: 610 mm
- maximum workpiece height: 600 mm
- centering hole: 50 mm - H7
- pallet rotation range: 360 degrees every 1 ...
CNC machining center DUGARD EAGLE 850 was produced in 2012. The
machine is offered with equipment.
Technical data of the milling machine CNC :
- CNC control system: Fanuc 0iMD
- table dimensions: 1000 x 510 mm
- maximum table load: 500 kg
- T-groove, quantity x size x spacing: 5 x 18 x 100 mm
- X axis travels: 850 mm
- Y axis travels: 530 mm
- Z axis travels: 510 mm
- distance of the spindle tip to the table axis: 150-660 mm
- distance between spindle axis and column: 585 mm
- spindle taper: ISO 40
COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON
ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS
Type/Model// Tip/Model VALPAK
Putere/Power 4 kW
Year of manufacture/an fabricatie 2003
Acustic pressure/nivel de zgomot 59 db (A)
Supply voltage/alimentare 380 V triple phase
Protection/protectie 16A curve D
Sizes/Dimensiuni in cm
Coil Weight – Al fins 140x210x280 cm (LxWxH)
Amount in stock/pe stoc 1 pc/buc
1 sac rotund de dese ...
Crease and Folder Horizon CRF-362
Air Suction Feed Belt
Sheet Size (W x L): Max. 364 x 865 mm / Min. 105 x 180 mm (However,
the sheet length is limited depending on the fold pattern).
Sheet Weight Range (Normal Paper): 80 to 350 gsm (with Folding) / 80
to 400 gsm (without Folding)
Max. Feeder Stack Height: 150 mm
Max. Number of Impact Crease Lines: 10 Creasing Lines
Production Speed: 4,500 sheets per hour (A4 / one creasing line and
Line for elastic folders and small cases with snap fasteners
Automatic line for assembling folders with straight and criss-cross
elastic band having two rounded metal tags.
Materials: Coated board, Fiber board or similar, Polypropylene, Round
Cardboard thickness: from 1 mm to 3,5 mm
Capacity: up to 12 pieces/minute
Electrical power req.: 11 Kw
Compressed air: 350 NL/min. (pressure 7 bar)
Overall dimensions: L=5000mm P=3800mm H=1800mm
Automatic laminating machine A540
Max size: 540 x 780 mm
Min size: 210 x 290 mm
Paper thickness: 105 -500 grms
Speed: 0-30 mts/min
Weight: 1400 kg
Dimensions: 3200 x 1250 x 1620 mm
Flat Pile feeder with suction head
Air shaft expandable
Large Diameter Induction Heated Cylinder
Delivery with vibration
Tommy Nielsen 301FSX universal semi-automatic blister packaging
machine, 2 heating plates with dimensions of 200 x 400 mm, blister
depth max. 120 mm, 380V, 2.5 kW, 7 bar compressed air, working height
(table height) approx. 760 mm, floor space approx. 1100 x 1200 mm,
machine height approx. 1300 mm
Year 2002 - Complete of:
Steel plate in feeder
Number of printing unit(s): 5
Automatic inking roller washing device
Automatic blanket washing device
Automatic impression cylinder washing device
Dampening system: Technotrans CombiStar
Ink temperature control
Number of coating units: 1
Water base coating: chambered ductor system
IR drying system in delivery
Non Sto ...
aus einer Geschäftsauflösung (War in Anlage eingebaut - hat bis zur
Ventilantrieb EL-O-Matic PE15 mit Kugelhahn Druckluftansteuerung
1. Ventilantrieb Stellantrieb
Typ: PE15 Nr. 2319064
DN 40 A
PN 40 BSPL
HERION (Ex G4)
Anschluß: 220V 50Hz 15 W
4 Druckminderer mit Ölauffang
P max = 16 bar
Zustand: war in Anlage eingebaut - hat ...
CO2 Purification and Liquifying Plant Union Engineering RBU 1500 kg
Gaseous carbon dioxide (CO2) is fed from the fermentation process
through the foam separator where fermentation foam is removed and gas
is pumped to the intermediate 50 m3 CO2 buffer storage balloon (NOTE:
Foam separator is not included in this equipment) From this
intermediate storage gas is fed into the scrubber where designed to
clean the CO2 from ethanol and other impurities are washed away with a
clean water flow in counter current scrub ...
Oil Free Air Compressor Atlas Copco ZR 160 VSD with FD 380 dryer
The compressor is water cooled and oil free two stage screw compressor
with inter- and after coolers. This compressor has been manufactured
by Atlas Copco Belgium in year 2001. The package includes also a
separate dryer for out let air side. The equipment is a sound canopy
and it is controlled with advanced Eletronikon control system. The
unit is still installed and in excellent condition.
Manufactured by: ...
Air Compressor Atlas Copco ZR 315 VSD with FD 860 Dryer
The compressor is water cooled and totally oil free two stage screw
compressor with inter- and after coolers. This compressor has energy
saving speed control (VSD) for airflow airflow and it has been
manufactured by Atlas Copco Belgium in year 2006 . The package
includes also a separate dryer for out let air side. The equipment is
a sound canopy and it is controlled with advanced Eletronikon 4
control system. The unit is still installed and in excellent
Cleaner DOZAMET OWT 400A made in Poland in 1988. The cleaner is
offered with a filter chamber. A few years ago, the machine was
- useful capacity of the working chamber: 0.35 m3
- minimal dimensions of castings: min. 25 x 25 x 25 mm
- maximum dimensions of castings: 400 x 400 x 400 mm
- minimum wall thickness: 5 mm
- minimum unit weight of cleaned castings: 40 kg
- maximum casting load weight: 400 kg
- cleaning time for one load of iron castings: 3-6 min.
You didn't find your wanted machine?send wanted inquiryto all dealers (no registration necessary)