gear cutting and hobbing machines used for sale (209)

max. wheel diameter: 180 mmgear width: ca. 220 mmmax. module: 3 / 5 mmControl: Siemens 840D sl max. radial velocity: 5000 mm/minmax. workpiece diameter: 180 mmtable rotation speed: 800 U/mintable diameter: 145 mmaxial travel: 250 mm mmback rest:: axial travel: 300 mmclamping force max.: 13 kNmilling head:: swivelable +/-: 45 °drive capacity: 23 kWturning speeds: 6000 U/mindiameter of tools max.: 90 mmtool clamping length max.: 211 mmmodule hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/minweight of the machine ca.: 9,5 tdimensions of the machine ca.: 4,5 x 3,5 x 2,7 mEquipment / Accessories:- The machine is equipped for dry milling.- workpiece magazine- parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammer ...

Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Öfen Kammeröfen Herd wagenöfen Herdwagenöfen Glühen Härten Tempern Umformen Vorwärmen Schmieden Thermisches Reinigen Vakuumtechnik Pyrolyse Löten Öfen INDUSTRIEOFENBAU Kammeröfen Rollenherd H ...

Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen

Maximum workpiece outer diameter: 3420 mmMinimum workpiece inner diameter: 630 mmmax. module: 30 mmcontrol: Siemens Sinumerik 840 D Workpiece tooth width - max.: 600 mmtip circle diameter: 440 mmMilling arbour diameter: 80 mmx-travel: 1110 mmy-travel: 1300 mmspindle turning speed - stepless: 18 - 180 U/minrotary table speeds infinitely variable: 0 - 6 U/minRing stength: 500 mmtotal connected load: 100 kVAweight of the machine ca.: 38 tdimensions of the machine ca.: 8,41 x 9,05 x 5,19 mFeed rate: - X-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/min Spindle speeds in 1/min - Tool 18 to 180 - Workpiece table 0 to 6Equipment/accessories: - IFK2 internal milling head - Milling arbor with spacer discs - Chip conveyor - Oil mist extraction - Dry machining only - Technical documentation The data for this ad was created with ModulMWS - the software so ...

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmspindle speeds (infinitely variable): 6000 U/minwork piece spindle speed: 1200 U/mindiameter of tools max.: 230 mmdiameter of tools min: 69,85 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmb-axis: + 90,1 / - 1 °work piece table - Ø: 212,71 mmControl: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mInternal probe Renishaw LP2 (axis X2,Y2)Hoffmann coolant filter system HSF 100SE/K (built in 2008)Tank capacity 2500LVT oil mist filter systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmdiameter of tools min: 69,85 mmtooth width max.: 58 mmdiameter of tools max.: 230 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmwork piece table - Ø: 212,71 mmb-axis: + 90,1 / - 1 °Control: 160 i - MB FANUCtotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mWAGURIWith EWAB robot cell (KUKA robot)without coolant filter systemFire extinguishing system without CO2 bottlesCooling oil return with various pumps / collecting basinsThreading device A1/B2 axes with measuring probeClamping device for a pinion shaftExternal spindle oil coolerExtraction system pinion shaftThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmdiameter of tools min: 69,85 mmdiameter of tools max.: 230 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmwork piece table - Ø: 212,71 mmb-axis: + 90,1 / - 1 °Control: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mWAGURIwith EWAB load cell built in 2012(Linear loader)no coolant filter system available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. machining diameter: 3200 mmmax. workpiecediameter: 3200 mmaxial slide way: 2200 mmcontrol: Siemens Sinumerik 840 D table diameter: 2500 mmboring diameter: 800 mmmax. load: 40.000 kgtable rotation speed: 2 U/mingrinding head: grinding head - swivable: +45 / - 45 °turning speed range - grinding wheel: 270 - 2700 U/mintip circle diameter: min. 1500 mmgrinding spindel dia.: 100 mmMax. grinding wheel diameter: 450 mmDressing diameter: min. 250 mmPlaning width: min. 80 mmFast feed speed: axial: 10 m/minFast feed speed: radial: 3 m/minmax. depth of profile: 100 mmtail stock: tailstock travel: 1410 mmtotal power requirement: 225 kVAweight of the machine ca.: 46 tdimensions of the machine ca.: 14,5 x 9,95 x 6,1 mGear Profil-Grinding Machine- CNC Control Siemens 840D- Tailstock- Dressing Unit- Oil Mist suction- CoolantThe data for this ad was created with ModulMWS - the software solution o ...

max. wheel diameter: 5500 mmgear width: 1500 mmmax. module: 32 faceplate diameter: 3740 mmswing diameter: 6200 mmturning height: 1200 mmcontrol: FANUC 31i MODEL B : 1250 mmcross rail - adjustment: 3000 mmturning speeds: 3-15 U/minspindle turning speed - stepless: 15 - 1500 U/minworkpiece weight: 39,4 tmax. dia. of teeth cutting: 5500 mmtooth width: 550 mmmodule: 32 cutter speeds: 10 -150 U/minmilling cutter dia. x width: 450 x 110 mmmilling head axial adjustable: 2060 mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mComplex TurnMill & Gear Cutting Machine- CNC control FANUC 31i B- Turning and Milling Function- ATC- Angular Milling Head- Gear Hobbing (internal and external)- Chip ConveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 3000 mmgear width: 500 mmmax. module: 25 / 40 spindle turning speed range: 250 U/minfeed speeds: max. 4000 mm/minfaceplate diameter: 2000 mmtable bore diameter: 700 mmtable turning speeds: 51 U/minpower capacity - milling spindle: 53 kWdrive motor for milling spindle: - kWaxial adjustment: 1200 mmmilling head swivable ca.: +/- 45 °control: Siemens 840D total power requirement: - kWweight of the machine ca.: 55 t- CNC Control Siemens 840D- Internal Hob Head IFK- External Hob HeadThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 3000 mmgear width: 1200 mmmax. module: 30/40 min. module: 2 table diameter: 2500 mmtable load capacity: 400 kNhob dia. - max.: 450 x 500 mmmilling spindle speeds: 10 - 165 U/minhob length max.: 500 mmtip circle diameter: 2050 mmtooth helical angle min/max: 0 - 45 °center distance betw. workpiece-tool min/max.: 150 - 1750 mmmilling slide swivelling: 50 Graddistance table / counter stay: 1050 - 2050 mmshifting: 300 mmworkpiece weight: 40 ttable bore diameter: 800 mmdepth of hole: 1100 mmmain drive motor: 37 kWmin. workpiece diameter: 290 mmmin. number of teeth: Wälzfräsen 20 min. number of teeth: Formfräsen 2 taper: MK 100 feeds axial: 1 - 1680 mm/minradial feed: 1 - 500 mm/minfeed: Tangential 1 - 280 mm/minrapid traverse: 1680 / 530 / 280 mm/minelectrics - voltage/frequency: 380 / 50 V/Hzcontrol: Siemens Sinumerik 3M total power requirement: 125 kVAweight of the m ...

max. wheel diameter: 650 mmgear width: 200 mmmax. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mmtable bore diameter: 150 mmnumber of strokes - stepless: 35,5 - 560 c/minmax. ram stroke: 230 mmfeeds: 3,55 - 40 mm/minradial feed: 0,8 - 9 mm/minwork-spindle diameter: 110 mmtotal power requirement: 28,2 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 3,8 x 2,3 x 2,5 mGear shaping machine for the production of spur gears, forInternal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630complete Modernisation + overhaul in 2012 with:- new painting- new electrical system from Telemecanique- Counter Holder- Chip conveyor- Coolant unit- change gearsNot used in production again after overhaulThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mmgear width: 250 mmmax. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mmbase circle dia. - min.: 150 mmspecimen weight from/to: 4000 kgfeeler adjustment movement - parallel: 1400 mmmax.helical angle: 0 - 90 °wheel diameter with counterstay: 1000 mmfeeler adjustment movement - parallel: 800 mmcentre height: 1150 mmelectrics - voltage/frequency: 400 / 50 V/Hzdimensions of the machine ca.: 2,8 x 2,4 x 2,3 mtotal power requirement: 2 kWweight of the machine ca.: 3 tUniversal Involute and Helix Testing Machine - modernized 1995Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping andshaving cutters. Following tooth data can be t ...

REISHAUER RZ 303 C AUTOMATIC GEAR GRINDING LINE Year: 2008 Complete high-precision CNC gear grinding line for serial production and grinding of hardened external gears for automotive and transmission industries. MAIN EQUIPMENT 1. Reishauer RZ 303 C CNC Gear Grinding Machine 2. Felsomat automatic loading and unloading system 3. Hoffmann filtration and cooling system TECHNICAL DATA Maximum workpiece diameter: 300 mm Module reach: approx. 0.5–5.5/6 mm Helix angle: −48° to +48° Maximum tooth width: 200 mm Maximum grinding spindle speed: 4770 rpm Maximum cutting speed: 75 m/s Grinding worm diameter: up to 300 mm Screw width: approx. 125 mm CNC control: Siemens Sinumerik

under power

max. wheel diameter: 2000 mmgear width: . mmmax. module: 22 max. hob diameter: 250 mmhob turning speeds: 16-92 U/mintotal power requirement: 13 kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 600 mmgear width: 150 mmmax. module: 15 min. module: 1 clamping length min.: 45 mmclamping length max.: 750 mmworkpiece weight: 150 kgtotal power requirement: kWweight of the machine ca.: 0,55 tdimensions of the machine ca.: 1,2x0,8x1,95 mWorkpiece diameter with counterholder 300The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created wit ...

PE 150 TABLE; 2 course OVERHAULED

GP130 milling head without motor

Key data: 3500 mm, 36

Dear Sirs, We are pleased to offer a rare opportunity to acquire a HÖFLER Porta 3500 CNC Gear Grinding Machine, a high-capacity later-generation traveling gantry machine designed for precision spur and helical gear grinding, internal and external grinding applications. The machine is offered As Is” with limited use history and reasonable flexibility on pricing. Machine Overview The HÖFLER Porta 3500 is a later-generation traveling gantry CNC gear grinding machine designed for the precision finish grinding of large external and internal spur and helical gears. It is capable of grinding gears up to 3,500 mm (137.8”) diameter with exceptional accuracy and productivity. Serial Number: 928 Year of Manufacture: 2007 The machine has accumulated only approximately 6,800 operating hours since installation and is considered to have very limited use. Main Technical Specifica ...

Key data: 400 mm, 200 mm, 10

1-- 4-axis CNC-controlled gear grinding machine for cylindrical, straight-toothed involuted and special tooth systems. Make: Höfler Model: Promat 400 Year of Make: 2000 The grinding wheel is profiled with an integrated CNC dresser. Technical data: • Max. wheel diameter 240-400 mm • Max. grinding wheel width 30 mm • Nominal power grinding wheel 15 kW • Max. cutting speed 60 m/sec • Module: 0.5 - 10 • Max. tooth width 200 mm • Max. working stroke 210 mm • Workpiece carrier stroke speed 6,000 mm / min • Number of teeth freely selectable • Number of controlled axes: 4 (machine) + 2 (dresser) • Max. table load 100 kg • Total connected load 30 kVA • Weight of the machine approx.: 9 to.

MAAG SH-45 Gear shaping machine Min - max diameter 20 - 450 mm Min - max module 1 - 6 Min - max teeth diameter 6 - 250 Min - max tool stroke 0 - 145 mm Table diameter 360 mm Machine dimensions (LxWxH) 2100x1500x2000 mm Machine weight 3600 Kg Change gears The MAAG SH-45 Gear Cutting Machine is suitable for machining of: -External & internal cylindrical gears -Pinions -Spur & helical gears -Gear teeth with longitudinal and profile corrections -Cluster gears -Double helical gear Pictures attached. The machine was in operation for approximately 25 years in a custom manufacturing workshop producing one-off parts according to customer drawings, including gears, shafts, and components for machine tools and transport vehicles. It is in very good condition. Fully functional until it was last used. It hasn't been cleaned, so it doesn't have a "showroom" appearance.

MAX DIAM 400

Tall: 1300 mm, Weight: 200 kg, Width: 760 mm, Long: 1200 mm, Voltage: 220/380V, Total power: 1 CV, Diameter of the tooth: 150 mm, Serial number: 93095, Sharpening length: 600 mm, Ø max. of the workpiece: min/max = 2/26, Wheel speed: 3000 rpm, Specification: drill bits

max. wheel diameter: 0-200 mmmax. module: 25 min. module: 0,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece dia.: 40 mmmax. module: 2 min. module: 0,1 workpiece length - max.: 665 mmweight: 4,5 tspindle bore diameter: 82,5 mmControl: Siemens total power requirement: 5,5 kWTechnical datamax. module 2Pitch 0.5 - 25 mmNumber of speeds multi-speed / multiplemax. workpiece diameter40 mmmax. workpiece length180 mmMilling cutter diameter max.80 mmmax. milling cutter width12 mmZ-axis (milling length with counter point)90 mmZ-axis (milling length without counter point)113 mmMilling head swivelling angle30° / 30°DescriptionGear hobbing and thread cutting machine. LAMBERT - 124 CNCThe machine is in a well-maintained condition.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Liebherr WSC 1200____________Description:In General:Year of manufacture:2009Control system:Siemens 840 DExternal gear diameter:1,200 mmInternal gear diameter:1,200 mmMaximum gear width:260 mmMaximum workpiece diameter:1,500 mmMachine base:Travel:600 mmLateral adjustment:+/- 60 mmCutting head:Spindle diameter:125 mmTool holder:SK 45Distance between spindle and table:0–820 mmStroke length:270 mmMax. module:16 mmMax. tool diameter:300 mmMax. spindle speed:25 rpmTable:Table diameter:900 mmTable bore:320 mmBore depth:520 mmMax. speed:12 rpmMax. table load:95 kNEquipment:Chip removal:2 magnetic belt conveyorsCoolant supply:Cutting oil system with filter and temperature controlSet-up operation:Electronic handwheel

Key data: 800 mm, 16

Spiral bevel gear dia. 800 mm

MAX DIAMETER 550 , MAX MODULE 6