gear cutting and hobbing machines used for sale (209)

max. wheel diameter: 420 mmgear width: 120 mmmax. module: 8 min. module: 0,5 control: BWO 783 no. of strokes: 32 - 800 Hub/minstroke: 0-137 mmtable diameter: 400 mmtable bore diameter: 125 mmtotal power requirement: 50 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 5,3 x 3,9 x 3,5 mCNC control Heckler und Koch BWO 783The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gear hobbing diameter - external: 1200 mmgear hobbing diameter - internal: 1200 mmgear hobbing width -max.: 260 mmcontrol: Liebherr PC-NC max. workpiece diameter: 1500 mmtable diameter: 900 mmtable bore diameter: 320 mmmax. table load: 95 kNpower capacity: 30 kWcoolant pump: 120 l/minAxial distance between thrust spindle - table: 0-820 mmShaping spindle diameter: 125 mmtool taper: SK 45 DIN weight of the machine ca.: 26 tdimensions of the machine ca.: 8,073 x 6,183 x 4,375 mStrokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/minEquipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter nominal: 2400 mmmax. workpiece diameter: 2800 mmmax. module: 30 mmcontrol: Siemens Sinumerik 840 D dividing plate diameter: 2200 mmtable diameter: 2500 mmTable hole Diameter / depth: 800 / 875 mmmax. table load: 40000 kgTable rpm: 4,5 min-1clamping length max.: 375 mmclamping diameter max.: 350 mmcutter diameter max.: 2800 mmCutter arbor cone: HSK-B160 swivelling range milling head: + 30/-45° Distance Cutter - Workpiece: 615 / 1600 mmweight of the machine ca.: 57 tSlide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/minEquitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical DocumentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specification: Universal

Divider, counterpoint, dividing discs, useful sharpening bits, useful sharpening blades, cones and grips., Specification: Universal

max. wheel diameter: 380 mmgear width: 200 mmmax. module: 6 min. module: Control: SIEMENS Sinumerik 840D working area: - max. gear diameter: 380 mmmax. workpiece diameter: 400/ 600 (800) Außen innen begmax. gear width: 200 mmCenter distance between gear head and table center: -50 / 450 mmTravel range of the lifting position: 250 mmMax. module for straight gearing: 6 mmMax. axial travel: 250 mmwork table:: - table diameter: 400 mmtable hole: 150 mmmax. table speed: 30 1/mno. of T-slots: 6 St.Table equipped with hydraulic clamping device: - Multi-interface for pallet loading and zero-point: - clamping system in the working area: Shaping Head and Lift-off Cam:: - Drive power of face milling head: 37 kWMax. stroke rate: 600 DH/minFace milling head axis angle adjustment: +/- 0,5 °spindle cone: HSK-B100 DIN 69893 taper of shaper cutter: 60 work-spindle diameter: 110 mmStroke length, automa ...

max. wheel diameter: 1000 mmgear width: 630 mmmax. module: 16 min. module: 1 wheel diameter with counterstay: 800 mmmax. number of teeth: 999 clamping length: 1060 mmworkpiece weight: 1500 kgmax.helical angle: 45 °grinding spindle drive: ca. 20 kWControl: Opal / Siemens total power requirement: 70 kWweight of the machine ca.: 17,5 t- CNC control Opal / Indramat with Siemens S5 PLC- paperbandfilter- oil mist exhauster- complete coveringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1250 mmgear width: 430 mmmax. module: 30 min. module: 2 no. of teeth: 10 - 400 max.helical angle: 45 °Stößelhublänge: 25 - 450 mmstroke position adjustment: 310 mmDoppelhubzahl - stufenlos: 70 - 190 U/mingrinding wheel diam. min/max.: 290 - 400 mmtable diameter: 1000 mmtable load: 4000 kpdimensions of the machine ca.: 7,7 x 4,5 x 3,3 mtotal power requirement: 30 kWweight of the machine ca.: 28 t- Complete covering- Oil mist extraction- Coolant system- counter Holder- change Gears- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 8

Max. outer diameter (gear): 630 mm Max. inner diameter (gear): approx. 750 mm Max. tooth width: 180–200 mm Max. module: 8 Shock stroke: up to 220 mm Stroke rate: 47–300 strokes/min Tool holder: MK 4 Drive power: approx. 8 kW Total connected load: approx. 10–12 kW Njbmsww Er Hompw Spjwk Machine weight: approx. 5,500–5,800

Key data: 630 mm, 8

A used gear pusher Lorenz S8/630 with interchangeable wheels.

max. wheel diameter: 630 mmgear width: 215 mmmax. module: 12 min. module: 1 number of teeth: 5 - 140 stroke length max.: 225 mmtable diameter: 500 mmtable load: 400 kpgrinding wheel diam. min/max.: 270-350 mmmax.helical angle: 45 °no. of strokes: 75 - 315 p.M.total power requirement: 8,5 kWweight of the machine ca.: 6,3 tdimensions of the machine ca.: 3,2 x 3,6 x 3,7 mchange gears,program control,complete covering,coolant/Filtering attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mmy-travel: 300 mmz-travel: 1000 mmcontrol: Siemens Sinumerik 840D max. workpiece diameter: 1600 mmmax. module: 20 mmtip circle diameter: 350 mmMilling arbour diameter: 375 mmTotal closing value: 80 kVaweight of the machine ca.: 33,5 tdimensions of the machine ca.: 10,530 x 6,375 x 4,680 mFeed rate: - X-axis 1 to 3000 mm/min - Y-axis 1 to 3000 mm/min - Z-axis 1 to 4000 mm/minSpindle speeds in rpm: - Tool 26 to 265 - Workpiece table 0 to 8Equipment/accessories: - M 2 motor milling head - Milling mandrels - Oil cooler - Technical documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SHIFT PULLEYS ,MAX DIAM 600 ,MAX MODUL 6

max. wheel diameter: 780 mmgear width: 130 mmmax. module: 8 / 10 table diameter: 510 mmtable bore diameter: 160 mmnumber of strokes (double strokes): 30 - 1500 DH/minControl: Siemens Sinumerik 3 distance table - lower edge of ram: 650 mmtable-size: 500 mmtotal power requirement: 36 kVAweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,9 x 3,65 x 3,8 mThe machine is suitable for:- Internal and external gear teeth in small quantities- Internal gear teeth in blind holes (non-through holes)- External gear teeth without run-out, as hobbing would not be possibleExamples of components are: Internal gear rings for planetary gears, drive shafts, clutch hubs...- Siemens Sinumerik 3 CNC control- Chip conveyorMachine was only used sporadicallyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear hobbing machine STANKO 5K32 with accessories.

Key data: 4000 mm, 1560 mm, 32

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent ...

max. wheel diameter: 500 mmHypoid adjustment: ±70 mmaxial cross angle: 90 °Distance Y-: 150 - 350 mmDistance Z-axis: 120 - 340 mmturning speed range - stepless: 0 - 5000 U/minmax. torque on the spindle: 57 NmCone: 99,2 mmPull-in force Tool clamping: 23000 NBraking torque max.: 93 Nmtotal connected load: 20 kVAtotal power requirement: 15 kWweight of the machine ca.: 6 tdimensions of the machine ca.: 2,35 x 2,24 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mmgear width: 125 mmmax. module: 8 ram stroke range: 135 mmmax.helical angle: 41 °table diameter: 500 mmno. of teeth: 12 - 300 total power requirement: 7,5 kWweight of the machine ca.: 6 t2021 completely overhauled and equipped with controls and new motors.suitable for internal & external gear shapingwith:- Control unit- chip conveyor- coolant- change gearsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mmtooth width max.: 58 mmspindle speeds (infinitely variable): 6000 U/minwork piece spindle speed: 1200 U/mindiameter of tools max.: 230 mmdiameter of tools min: 69,85 mmx-axis: 325 mmy-axis: 350 mmz-axis: 470 mmb-axis: + 90,1 / - 1 °work piece table - Ø: 212,71 mmControl: SIN 840 D SIEMENStotal power requirement: 75 kWweight of the machine ca.: 10.000 Kgdimensions of the machine ca.: 6,10 x 4,40 x 3,30 mcoolant filtering unit Hoffmann HSF 100 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling equipment - weight: 200kg L 1,700 x W 800 x H 900 cm, High: 2.100 mm, Long: 2.400 mm, Width: 2.400 mm, Weight: 2,500 Kg., Voltage: 380 V, Total power: 4 Kw, Wheel speed: 2,250 / 6,000 rpm, Grinding length: 400 mm, Ø max workpiece: 320 mm, Transversal stroke: 260, Longitudinal stroke: 400 mm, Distance between points: 700 mm, Race car rolling (x axis): 400 mm, Vertical travel of trolley wheel: 280 mm, Specification: Universal

Stock number: 3984 GEAR MILLING MACHINE Manufacturer: STAEHELY, Type: SHA 506 Machines NO.: 10442, Year of manufacture: 0 Specifications: Module 6 Table size 300 mm Ø Spindle speeds 100-500 rpm Accessories: Zuadds gear Operating instructions Length: 2200 mm, Height: 2000 mm, Width: 1300 mm, Weight: 4860 kg

MAX DIAM 250 X 2000

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear hobbing machine LIEBHERR ET 1200

max. wheel diameter: 100 mmgear width: 26 mmmax. module: 31 min. module: 0,1 Control: Siemens 840 D SLtotal power requirement: 45 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 4x3x2,5 mGleason 100S gear shaping machinefor the production of internally and externally toothed cylindrical gears andother cylindrical workpiece circumference regularly occurringprofiles and moulds as well as for the production of profiles using thesingle part process.Technical data:Nominal workpiece diameter 100 mmLargest circumferential diameter 150 mmMachine nominal module approx. 3 mm(Guide value depending on the respective machining task.)Shaping spindle stroke speed range 0 - 3,000 1/minStroke position adjustment range (manual) 20 mmLargest toothing width 26 mmSmallest pitch height of the hydrostaticinclined guide 400 mmSmallest/largest distance between tool axis - 20/+ 180 mmand workpiece  ...

max. wheel diameter: 180 mmgear width: 45 mmmax. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mmspindle taper: innen MK 4 table diameter: 160 mmtable bore diameter: 75 mmno. of strokes: 355 - 630 Hub/minfeed range: 0,008 - 0,4 mm/Hubdimensions of the machine ca.: 2,30 x 1,50 x 2,36 mpower capacity: 6 kWweight of the machine ca.: 2.500 kgYear of construction: Approx. 1970The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mmgear width: 500 mmmax. module: 1 min. module: 10 total power requirement: 16 kWweight of the machine ca.: 8.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 min. module: 12 total power requirement: 8 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mD O N A U - K N A P P (Germany)Universal Automatic Rack Milling MachineModel UZFM – V 300 H Year approx. 1980 Serial No. 80-234xMax. length of rack 1,750 mmMilling travel / milling width cross max. 260 mmModule, steel / cast iron 10 / 12Table clamping size 275 x 1,850 mmMounting height below cutter, depending on cutter Ø 136 – 410 mmCutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mmCutter width max. floating / with support 50 / 140 mmCutter mandrel Ø max.  ...

max. wheel diameter: 80 mmgear width: 120 mmmax. module: 3 min. module: 1 control: SIEMENS 840 C total power requirement: 30 kWweight of the machine ca.: 7500 tdimensions of the machine ca.: mL I E B H E R RCNC – Controlled Gear Hobbing MachineType LC 82Baujahr 1995 Ser.-Nr. 0836______________________________________________________Gear-Diam. max. 80 mmModule Range 1 - 3 Helix Angle +/- 45 °Distance Table Center to Tool Center 15 – 160 mmHobbing Head Slide stroke vertical 250 mmTangential Travel / Shift Travel of Tool slide 180 mmMinimum Number of Teeth 3 (!)Hob Size max. Ø x length approx.  ...