grinding machines used for sale (2,204)

Internal grinding machine VOUMARD 52A

A conventional Schaudt external cylindrical grinding machine is available. Center distance: 1000mm, center height: 180mm, max. grinding diameter: 350mm, max. grinding length: 1000mm, plunge grinding length: 100mm, swivel range: 45°, machine dimensions X/Y/Z: approx. 3200mm/1700mm/1700mm, weight: approx. 4500kg. An on-site inspection is possible.

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit,, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed between CBN ...

- Digital read out system position slides- 5 stones and flanches- Coolant and Filtration system- CE Mark- Levelling pads included - Full set off books 

Cup wheel Ø: 175 mm Table clamping surface: 150 x 250 mm large installation height without/with magnetic plate: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Drive motor: 380 V, 1.5 kW Approx. space requirement: 800 x 600 x 1600 mm Weight approx.: 200 kg

A complete cut-off grinding system is available. Product length range: 750mm-1400mm, product diameter: 75mm/100mm, max. deflection at 1400mm: 10mm, tolerance at 75mm: +/-5mm, tolerance at 100mm: +/-9mm, operating hours: 20653h. System components: 1) Cut-off grinding machine Harald Baumgarten. 2) Bundle loader Sema Systemtechnik. 3) Bar breaking unit. 4) Bar rotating drive and measuring station. 5) Weighing station with cut piece sorting. 6) Extraction and filter system. 7) Soundproof cabin with safety fencing. 8) Four-column press Winter. 9) Hydraulic unit with pumps. 10) Control cabinet and operator panel. Documentation available. An on-site inspection is possible. Expected to be available from May 2026.

Solver - KS360 - belt sander - Motor power: approx. 1.6 – 2.6 kW - Belt speed: approx. 7.5 – 34 m/s (depending on the pulley) - Drive: Electric motor with belt drive - Sanding belt length: 2,500 mm - Sanding belt width: 5 – 75 mm - Contact washers: Ø approx. 100 – 225 mm - Strap system: 3-roller system Dimensions: LxWxH 0.9x0.7x1.8 meters / Weight 350Kg

grinding length: 1025 mmgrinding width: 520 mmworkpiece height: - mmControl: SINUMERIK 840 D tool taper: HSK-A 63 A - axis: + 110 / - 5 °workpiece weight: 30 kgdistance grinding spindle - table min./max.: 473,5 - 1023,5 mmx-axis: 520 mmy-axis: 550 mmz-axis: 1000 mmV-axis: 166 mmfeed x-axis: 4 - 6.000 mm/minfeed y- axis: 4 - 4.000 mm/minFeed z- axis: 30 - 25.000 mm / min.table dimensions: 1.400 x 874 mmspindle speeds (infinitely variable): 0 - 12.000 U/minpower capacity - grinding motor: 35,00 kWgrinding wheel diam. min/max.: 100 / 300 grinding wheel width: 60 mmtotal power requirement: 100,00 kWweight of the machine ca.: 11,00 tdimensions of the machine ca.: 8,60 x 7,25 x H3,80 m5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated withouta tool changer), fire extinguishi ...

JOTES SPD 30B surface grinding machine was built in 1978 in Poland by PONAR-JOTES Łódź. The machine, designed for precision grinding of workpieces, is an excellent choice for professional production applications. Workpieces placed on a large magnetic plate or directly on the work table are machined by means of a spindle with a grinding wheel which moves transversely and vertically. The grinding wheel, driven by an electric motor, reaches a maximum speed of 26 m/s. The work table, on the other hand, is hydraulically driven and allows stepless adjustment of the feed rate in a range of 2 to 30 m/min. Changing the table’s travel direction is done automatically using stops or manually by switching the appropriate lever. The SPD 30B magnetic surface grinding machine weighs 5000 kg. Technical specifications of the JOTES SPD 30B grinding machine - work table surface (L x W): 1000 x 3 ...

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotofera The 7-speed gearbox Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 rpm (400 V, 50 Hz, 3 Ph, 1.0 kW, 16.8 kg)  Continuous use - Separation of motor and tool ensured Fatigue-free working Areas of application - Grinding - Separation - Roughing - Milling - Rust removal - Polishing - Brushes For light as well as for the heaviest work, especially of stainless steel, in boiler and steel construction, in polishing workshops, in apparatus construction, for kitchens and hospital supplies, etc.

Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm):  ...

Grinding wheel dimensions (od x id x width): - ajuste vertical manual del a rodillo, Ø min/max to be rectified: 125 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø280 x Ø165 x 254 mm, Working wheel motor power: 30 Cv, Total power: 34 Cv, Weight approx.: 5.500 Kg, Dimensions: 2600 mm long x 1200 mm wide x 1200 mm high

workpiece length: 2700 mmswing dia.: 630 mmclamping length: 2700 mmstroke position adjustment: 40-130 mmgrinding wheel diameter: 1000 mmtotal power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: 9x4 mcyclic control CNC / Simatic S7-300steady resthydraulic pre-positioningmanual fine tuning (Vertical u. Horizontal)grinding wheel flangesrough turning fixtureRadial- and side turning fixtures manual Radius turning fixturefiltering system Polo inclined bed filter SB-A0.4manufactured in 2012grinding wheels storage system for 8 grinding wheelsdiverse machine toolssteady rest jawsdiverse irrigation nozzle (workpiece cooling)washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulationdiverse spare partssliding cover left and rightdiving plate and clampinsertsThe tech. Data are manufacturer or oper ...

This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8000 rpm. The machine has a robust weight of 3800 kg and includes a cooling/filtration system from Transor Filter GmbH. If you are looking to get high-quality internal grinding capabilities, consider the Michael Deckel S22 internal grinding machine we have for sale. Contact us for further details.

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

A CNC cylindrical grinding machine Karstens including a coolant system Knoll VRF 150/620 (1997) and an emulsion separator KGH KFM-1200 (2000) is available. Grinding length: 650mm, center height: 190mm, max. grinding diameter: 3800mm, max. workpiece weight between centers/flying: 250kg/100kg, table swivel: +/-12.5°, table feed: 4m/min, machine dimensions X/Y/Z: approx. 3250mm/2150mm/1800mm, weight: approx. 3500kg, control: CNC 20. An inspection on site is possible.

workpiece diameter: - mmworkpiece weight: - kgworkpiece height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1500 mmworkpiece height: - mmnumber of wheels: 4 total power requirement: 4,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 515 mmgrinding length: 3000 mmcentre height: 250 mmturning speed range: 11,2 - 355 U/minquill stroke: 40 mmmorse taper: 5 rapid adjustment: 70 mmspindle turning speed range: 1080 - 1860 U/minworkpiece weight: max. 500 kgtable speeds: 0,05 - 5 m/mintotal power requirement: 17 kWweight of the machine ca.: 9 tdimensions of the machine ca.: 8,0 x 3,0 x 2,6 mUniversal external cylindrical grinding machine- coolant tank & magnetic filter- feed with adjustable stop- tailstock with air bearings- workpiece spindle- various steady restsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical grinding machine (inter/exter) STUDER S20 Favorit Tailstock: 650 mm Inter. / exter. SONY 2-axis visualization Watering tray More information on request.

Thread grinding machine WMW 5822M with change gears.

quantity: 1 STK-> 80120.14318-> m= 1 - 3 / EW 25°Various diamond dressing wheels from Fässler available.Application: Dressing grinding wheels / precision machiningPrice per piece, discount for multiple purchasesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table diameter: 600 mmgrinding height: 600 mmgrinding head - power requirement: kWworkpiece weight: 300 kggrinding wheel diameter: 600 mmpower spindle motor: 15 kWgrinding height: 600 mmControl: SIEMENS STC weight of the machine ca.: 19 tdimensions of the machine ca.: 4,7 x 3,6 x 2,5 mEquipment & Accessories? Wet grinding unit with universal paper belt filter, discharge container and magneticseparator, tank capacity approx. 500 l? Electrical cabinet with digital drives SIMODRIVE 611D? Coolant Mist extractor? Recooling unit for grinding spindle motor? Fully closed machine enclosure? Central lubrication? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of themachine? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due tolack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via pushbutton. After switchi ...

workpiece diameter: - mmgrinding depth: - mmclamping length: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: - mmgrinding depth: - mmclamping length: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: - mmgrinding depth: - mmswing diameter: - mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: - mmgrinding depth: - mmswing diameter: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: mmregulating wheel width: mmmax. width of grinding wheel: mmControl: SIEMENS 840D total power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.