grinding machines used for sale (2,500)

Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

Stock number: 3986 SURFACE GRINDING MACHINE Manufacturer: SEEST , Type: Surface grinder Specifications: Large stone diameter 350 mm Automatic feed. Length: 1500 mm, Height: 1200 mm, Width: 800 mm , Weight: 1000 kg

Grinding wheel dimensions (od x id x width): Ø350 x 125 mm, Ø min/max to be rectified: 1.5 - 50 mm, Regulating wheel dimensions (od x id x width): Ø220 x 125 mm, Grinding wheel width: 125 mm, Maximum length to be rectified in plongeé: 120 mm, Grinding wheel head motor power: 10 HP, Total power: 8,5 Kw, Weight: 1.500 kg

turning speed range - grinding spindle: 4500 U/minmax diameter of the vice bore: 17,5 mmmax. radius to grind: max. 10 mmmax. lateral adjust. of milling cutter: 10 max. longitudinal adjust. of milling cutter: 40 max. angle for relief grinding: 45 Gradweight of the machine ca.: 125 kgOperating instructions availableincluding collet set, grinding wheel flange wrench and the following special accessories:- Aluminium oxide grinding wheel- 3 diamond grinding wheels, different versions- 1 additional grinding wheel holder with diamond grinding wheel- Dressing diamond- Grinding dust coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz  ...

Key data: 400 mm, 1500 mm

Control Siemens ... Simatic OP17 Max. grinding diameter ... 400mm Max. sanding length ... 1500mm Max. workpiece weight ... 500kg Internal grinding Machine weight ... 9200kg L x W x H ... 6220x2760x1950mm The machine is in good condition, possible to test under power.

CNC cylindrical grinding machine, STUDER S31 CNC LeanPro, with Pictogramming, Distance between centers: 1000mm, Center heigh 175mm, Grinding Wheel head rotation (B) 360° (1°), 2 ext Grinding Wheels, 1 int Grinding Wheel, Ext Grinding wheel, 400 mm x 40 mm x 127 mm, overhauled spindle > see photos, Workhead, CM 4, 0-1000 RPM, CNC Fanuc, Programming: Pictogramming, Heidenhain linear encoders, This machine can be inspected under power in our warehouse in Gussago BS Italy

Grinding wheel dimensions (od x id x width): Ø508 x Ø304.8 x 254 mm, Ø min/max to be rectified: 150 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø330 x Ø203 x 254 mm, Regulating wheel motor power: 4 Kw, Grinding wheel head motor power: 37 Kw, Hydraulic motor power: 2,2 Kw, Total power: 45 Kw, Long: 3.500 mm, Width: 2.500 mm, Tall: 1.100 mm, Weight: 6.500 Kg

max. grinding diameter: / mmgrinding length: / mmworkpiece length: / mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable -Mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg

center hole: 2-50 mmworkpiece diameter: 8-125 mmworkpiece length - min.: 50 mmworkpiece length - max.: 1000 mmcolumn - center height: 145 mmgrinding wheel speeds:: number: 3 from/to: 13000-45000 U/minspindle turning speed range: 400 U/mindimensions of the machine ca.: 750x850x1800 mmweight of the machine ca.: 475 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 200 mmcentre height: 100 mmcentre distance: 525 mmweight of the machine ca.: 700 kgdimensions of the machine ca.: 120x100x150 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 200 mmgrinding length: 525 mmcentre height: 102 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 650 mmgrinding width: 300 mmmax distance spindle center to table surface: 550 mmcross travel: 310 mmlongitudinal feed: 700 mmweight of the machine ca.: 1.8 tdimensions of the machine ca.: 3.0 x 1.87 x 1.9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 140 mmmax. grinding diameter: 279 mmcentre distance: 750 mmweight of the machine ca.: 1000 kgdimensions of the machine ca.: 1.5 x 1.25 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 175 mmcentre distance: 1000 mmgrinding wheel dia. x width: 400 x 50 / 225 x 20 mmgrinding wheel hole diameter: 127 / 76.2 mmgrinding wheel turining speeds: 1500-2200 U/mincross slide - travel: 245 mmworkpiece spindle head:: turning speed range - stepless: 6-600 U/minspindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 °weight of the machine ca.: 3.1 tdimensions of the machine ca.: 2.85 x 1.75 x 1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mmgrinding width: 600 mmgrinding height: 500 mmweight of the machine ca.: 4.9 tdimensions of the machine ca.: 3.20 x 2.90 x 2.55 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 330 mmgear width: 180 mmmax. module: 7 min. module: 0,5 total power requirement: 12 kWweight of the machine ca.: 7500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. dia. of grinding wheel: 800 mmmax. width of grinding wheel: 250 mmgrinding table: swivable: Gradtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDouble Sided Finegrinder, Dresser, Coolant Device, older M. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter max.: 30 mmregulating wheel width: 12 mmmax. width of grinding wheel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 280 mmgear width: 330 mmmax. module: 5 min. module: 1 Control: LIEBHERR CNC total power requirement: 28 kWweight of the machine ca.: 12 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 460 mmthreading length: 900 mmthread pitch: 100 mmtotal power requirement: 10 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1600 mmgrinding width: 600 mmworkpiece height: 500 mmtotal power requirement: 50 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

connected load frequency: 230 Vweight: 4,7 kgrange L-W-H: 620 x 240 x 180 mmoutput: 0,8 KWgrinding band dimension: 40 x 760 mmtube diameter max.: 180 mmband speed: 2,4 - 9,1 m/sPipe grinding/finishing machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. dia. of grinding wheel: 200 mmgrinding wheel width: 32 mmtaper diameter: 30 mmconnected load frequency: 230 Vengine output: 0,9 KWweight: 28 kgdimensions: 0,56 x 0,32 x 0,30 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mmworkpiece height: mmnumber of wheels: 2 total power requirement: 11 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: mmworkpiece height: mmnumber of wheels: 2 total power requirement: 8 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.