We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (10)
- Injection molding machines (425)
- Injection molding machines for rubber (2)
- Injection moulding devices (4)
- Injection moulding tools (1)
- Injection presses for rubber (1)
- Machines used for injection moulding (4)
- Multi component injection moulding machines (9)
- PET Machines (13)
- PET Preforming machines (13)
- Plastic injection machines (98)
- Precision injection molding machines (2)
- Special injection moulding machines (6)
- more
- ABB (1)
- ACOPOS (1)
- ANJI (1)
- AOKI (1)
- APEX (1)
- Arburg (172)
- ARBURG 200T (1)
- ARBURG 320C (1)
- ARBURG 320T (1)
- ARBURG ALLROUNDER 920H (1)
- ARBURG ELECTRIQUE (1)
- ARBURG UND BOY (1)
- ARBURG/DEMAG/ENGEL (1)
- ARBURG/DEMAG/STüBBE (1)
- ARBURG/NETSTAL/DEMAG (1)
- Babyplast (2)
- BATTENFELD (33)
- BATTENFELD MICROSYSTEM (1)
- BATTENFELD VM INSERT (1)
- BILLION (15)
- BMB (2)
- BMB 220T (1)
- BMB 350T (1)
- BORCHE (4)
- BORCHE BI (1)
- BOSCH (1)
- BOY (22)
- BOY E (1)
- BUSCH (1)
- CHENDE (1)
- CRONOPLAST (1)
- DEMAG (53)
- DEMAG ERGOTECH (3)
- DEMAG ERGOTECH 350T (1)
- DEMAG SYSTEC (1)
- DESMA (1)
- Dr. Boy (8)
- DR.BOY (1)
- ENGEL (97)
- ENGEL 800T (1)
- ENGEL INSERT (1)
- Engel Victory (5)
- FANUC (2)
- FCS (4)
- Ferromatic (2)
- Ferromatik (14)
- FERROMATIK MILACRON (7)
- Haitian (15)
- HATIAN (1)
- HUARONG (1)
- HUSKY (28)
- HUSKY HMI (1)
- Husky Injection Systems (2)
- INTRON (1)
- ITALTECH (1)
- JONWAI (1)
- JSW (2)
- KAI MING (1)
- Kloeckner Desma (2)
- Krauss Maffei (80)
- KRAUSS MAFFEI MX (1)
- Krauss mMaffei (2)
- KRAUSS-MAFFEI (2)
- KraussMaffei (2)
- KRAUSSMAFFEI 420T (1)
- LWB (1)
- Maplan (2)
- Milacron (2)
- MIR (1)
- MOHRTEK (1)
- MOOG (1)
- NEA (1)
- NEGRI BOSSI (16)
- NEGRI BOSSI CANBIO (2)
- NEGRI BOSSI EOS ST (1)
- NEGRI BOSSI SACMI (1)
- NEGRI BOSSI V (1)
- NEGRI BOSSI VH (1)
- NEGRIBOSSI (3)
- Netstal (9)
- NIIGON (1)
- NPM (1)
- OIMA (1)
- PM (2)
- PONAR ZYWIEC (1)
- PROCREA (1)
- REAL (1)
- REINHARDT (1)
- REP (1)
- REXROTH (5)
- ROMI (1)
- RUTIL (4)
- SACMI (6)
- SANDRETTO (26)
- SANDRETTO MEGA (1)
- SANDRETTO MEGA T (1)
- SANDRETTO MEGATES (1)
- SEPRO (1)
- SHIBAURA (2)
- SIDEL (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 301)
ABB 1
ACOPOS 1
ANJI 1
AOKI 1
APEX 1
Arburg 172
BATTENFELD 33
BILLION 15
BMB 2
BMB 220T 1
BMB 350T 1
BORCHE 4
BOSCH 1
BOY 22
BOY E 1
BUSCH 1
CHENDE 1
DEMAG 53
DESMA 1
Dr. Boy 8
DR.BOY 1
ENGEL 97
FANUC 2
FCS 4
Ferromatik 14
Haitian 15
HATIAN 1
HUARONG 1
HUSKY 28
INTRON 1
ITALTECH 1
JONWAI 1
JSW 2
KAI MING 1
LWB 1
Maplan 2
Milacron 2
MIR 1
MOHRTEK 1
MOOG 1
NEA 1
NEGRI BOSSI 16
Netstal 9
NIIGON 1
NPM 1
OIMA 1
PM 2
PROCREA 1
REAL 1
REP 1
REXROTH 5
ROMI 1
RUTIL 4
SACMI 6
SANDRETTO 26
SEPRO 1
SHIBAURA 2
SIDEL 1
SIPA 1
SM 1
SMITH 1
STORK 10
TEDERIC 5
TOYO 1
WINTEC 1
WITTMANN 2
approved
dealer
dealer
1.300 € Control Type: Selogica,Closing System: Hydraulic,TECHNICAL DATAClosing Force: 600 kN,Clearance between Tie Bars: 370 mm x 370 mm,Platelet Dimensions: 570 mm x 570 mm,Mold Size: Min 250 mm,Maximum Opening Stroke: 500 mm,Maximum Distance Between Platens: 750 mm,Screw Diameter: 40 mm,Injection Volume / Shot Weight: 188 ccm / 172 grams PS,Injection Pressure: 1390 bar,GENERAL DATAMotor: 11 kW,Heaters: 5.5 kW,EQUIPMENTLanguage: German,Service Booklet: Yes Auction-ID: A7-49265-7
approved
dealer
dealer
Manufacturer: ARBURG Model: ALLROUNDER Centex 470 C 1500 - 400 Year: 2006 Condition: Used Stock number: 9406 Clamping force: 150 t Screw diameter: 40 mm Injection capacity: 201 cc Maximum distance between mounting plates: 750 mm Injection Molding Stroke: 500 mm Distance between uprights (horizontal): 470 mm Distance between uprights (vertical): 470 mm
approved
dealer
dealer
Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm
Injection moulding machine Ferromatik K 200s /2F-493 BJ 1999
Injection moulding machine Ferromatik K 125s/2f BJ 1995
Injection Molding Machine Ferromatik 110s-2F BJ 1999
Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006
Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009
Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008
approved
dealer
dealer
Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.
approved
dealer
dealer
A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible.
approved
dealer
dealer
clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...
approved
dealer
dealer
clamping force: 600 kNinjection volume: 144 cm³screw diameter: 35 mmplaten size: 570 x 570 mmclosing stroke: 500 mmCondition: usedSpecification: Horizontal injection moulding machineclamping unit:- Clamping force max.: 600 kN- clamping platens: 570 x 570 mm- clear column distance: 370 x 370 mm- Distance between the mould mounting platens: 750 mm- Mould installation height: 250 mm- Opening stroke max.: 500 mm- Ejector travel hyd. Ejector stroke: 175 mm- Ejector force max.: 40 kNInjection unit:- Screw diameter: 35 mm- Screw length: 20D- Screw stroke max.: 150 mm- Max. dosing volume: 144 cm³- Moulded part weight: 121 g- Injection pressure: 1,820 bar- Injection flow max.: 154 cm³/s- Screw peripheral speed: 57 m/min- ...
approved
dealer
dealer
ENGEL VICTOY 160 T Type: VICTORY 860/160 spex Clamping force: 160 T / 1600 KN Year: 2017 Number of hours: 36,900 hours Screw diameter: 55 mm Injectable volume: 508 cm3 Dimensions of the trays. : 750 x 750 mm Min mould thickness: 250 mm Dimensions: 5.80 x 1.70 x 2.40 m Weight: 8900 kg
approved
dealer
dealer
approved
dealer
dealer
Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany
approved
dealer
dealer
Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany
approved
dealer
dealer
Key data: 800 kN, 100 g/PS, 35 mm
1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence
approved
dealer
dealer
approved
dealer
dealer
Key data: 1200 , 134 , 36
approved
dealer
dealer
approved
dealer
dealer
approved
dealer
dealer
approved
dealer
dealer
Key data: 3200 , 694 , 60
approved
dealer
dealer
approved
dealer
dealer
approved
dealer
dealer
ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...
approved
dealer
dealer
BORCHE BH500 injection moulding machine was built in 2016 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of plastic components used in many industrial sectors and in everyday products. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This technology enables the rapid and precise production of repeatable components with complex geometries. The BORCHE BH500 has been designed for demanding mass production and intensive use. The machine is equipped, among others, with an 80 mm diameter screw and a precision mould clamping system with a force of 500 tonnes, which ensures a stable process. All operating parameters are programmed via the intuitive KEBA control system, which enables con ...
approved
dealer
dealer
Key data: 3200 , 1035 , 70
approved
dealer
dealer
A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.
