machines and plants for process engineering used for sale (7,560)

25 litre, Stock number: T4007, Litre: 25, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: In stand, on wheels, Top: Dished, Bottom: Dished, Double jacket: Yes, electrically heated, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Frame agitator, D 250 mm., Motor: 0,55 kW - 220/380 Volt - Variable, Working pressure tank: 0,8 bar, Working pressure double jacket: 0,2 bar, Inner diameter: Ø 300 mm., Outer diameter: D 550 mm., Total height: 1800 mm.

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

Machine name: Filter press used Manufacturer: Netzsch Type: 800/32 Year of Make: 1984 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 480 litres Procedure: Closed Filter area: approx. 34 m2 Plate format: 800 x 800 mm Number of plates: 32 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Panel package length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4,500 x W 1,700 x H 2,000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light barrier & drip plates. Condition: Used Price: On request

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

Stock number: D650, Table, stainless steel,, with sink., L 1300 x W 620 x H 450 mm., Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 stk., Item: Table, Size: L 1300 x W 620 x H 450 mm., Legs: 4 pcs.

Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm

Plunger Pump, High Pressure Pump, Homogenizer, Plumger Piston Pump, Plunger Piston Pump Manufacturer: WOMA Apparatebau GmbH Type: 753.50 max pressure 150 bar Flow rate approx. 175 l/min Engine Power: 55 kW 1500 rpm 380/660 volts 50 Hz Dimensions approx. 1800 x 1000 x 750 mm

1.450 litre, Stock number: T2232, Litre: 1.450, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of wheels, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the top, Ø 400 mm., Agitator: Flange for agitator at the top, Working pressure: 3/2 bar, Inner diameter: Ø 1180 mm., Outer diameter: D 1240 mm., Total height: 1850 mm., Manufacturer: Rustfri Staalmontage, Model/type: SK, Year: 1974

1.200 litre, Stock number: T469, Litre: 1.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. adjustable legs and 3 pcs. wheels, Top: Closed, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 400 mm., Working temperature: 133° C, Working pressure: 2 Ato, Inner diameter: Ø 1100 mm., Outer diameter: D 1180 mm., Total height: 1770 mm., Manufacturer: Abrahamsen & CO. A/S, Model/type: 836, Year: 1969, Other: The tank has an internal reparation

1.425 litre, Stock number: T3495, Litre: 1.425, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., Agitator: Yes , Agitator type: Frame agitator with scrape from the top, 3 washing wings, Motor: 7/17/22 kW - 740/1480/2955 rpm., Working pressure: 5.0 Bar, Inner diameter: Ø 1180 mm., Outer diameter: D 1350 mm., Total height: 3750 mm., Manufacturer: Oscar Krieger, Model/type: WO 2215, Year: 1974, Other: Homogenizer in the bottom

Condition: factory new,Volume: 20,300,Max. max. Operating temperature : 80,Specific gravity of the medium: 1.2,Shelves: conical bottom,Design: upright,Stand shape: feet height adjustable,Number of feet: 5,Ground clearance: 306,Diameter outside: 2,400,Cylindrical height: 4,250,Total height: 5,400,Wall thickness underbody: 3,Wall thickness cylinder: 2,Wall thickness upper floor: 2,5,Manhole / dome: in the top floor (DN 500),Type plate: Yes,Outlet: DN65 DIN 11851 ,Material in contact with the product: V2A 1.4307 (AISI304),Bottom bearing: No,Current interferer: No,Bottom Bearings: No,Power Interferers: No

PVC Compounding Plant, Hot/Cooling Mixer A hot/cooling mixing system including accessories must be handed in. The control system (PLC) is outdated and needs to be reinstalled. The system is still installed and must be handed in from the site. Hot mixer: Henschel Fluidizing Mixer FM 1500 A Engine power: 180/280 kW, 2-speed 750/1500 rpm Külmischer: Henschel Cooling Mixer KMH 4500 Double jacket, 6 mixing tools, 77 rpm Motor power 55 kW Accessories: - Liquid scale 25 kg - Liquid scale 250 kg - Weighing container for powdered media 650 kg - Conveyor belt for bag addition - Feeding station for big bag with discharge aid and rotary valve (Not shown on P&I) - Weighing container for plastic recyclate 600 kg - Transmitter and buffer tank for discharge from cooling mixer - Kaeser EB 420 C suction blower - Suction blower (blue)

Inverter heat pumps / chiller air-cooled reversible, Type: iHCY 020 PT1+FSH MTA S.p.A. HCYGNUS TECH Inverter iHCY 020 PT1+FSH are compact heat pumps reversible (heating / cooling) that are suitable for outdoor installation up to -15 / -10°C suction temperature. Including crank pan heater, buffer tank, built-in P1 circulation pump, electric antifreeze heater (evaporator, storage tank and pump) and inverter scroll compressors Heat output kW 6.43 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 1.13 Available pump pressure bar: 0.84 Ambient temperature °C +7 Cooling capacity kW 5.46 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 0.971 Available pump pressure bar: 0.893 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 3.06 Max. current (A) 11.43 Starting C ...

EKOTON PRODEKO-EŁK GK-8.230.20.H filter press was built in 2018 in Poland by PRODEKO-EŁK. The machine is used for the economic dehydration of sludge, based on the principle of filtering solids from the liquid. The slurry pumped in flows through chambers with filter plates, on which the solids are retained. The sludge that accumulates in this way forms a so-called filter cake”, which, after filling the space of the chambers, falls out into a container or onto a conveyor. The use of this solution significantly minimises waste disposal costs in many industrial sectors, such as the metallurgical industry, chemical industry and mining. The GK-8.230.20.H membrane filter press weighs 37000 kg. The offered PRODEKO-EŁK KMF GK-8.230.20.H chamber filter press is fully complete and consists of the following parts: – support structure with platforms – tank for clean water – pressure  ...

A filter system Teka is available. Air flow rate: 5000m³/h, motor power: 4kW, machine dimensions X/Y/Z: approx. 700mm/1000mm/2700mm. Includes control cabinet/control unit and a few folding pipes. Documentation available. An on-site inspection is possible.

116 litre, Stock number: D1202, Incubator, stainless steel,, Binder type FED 115., Max 300° C,, 230 V., 1,6 kW., Inner dimensions D 400 x W 600 x H 480 mm., Outer dimensions D 710 x W 830 x H 710 mm., Litre: 116, Material: Stainless steel AISI 304, Inner dimensions: D 400 x W 600 x H 480 mm.

For sale is a V-cooler of the brand Güntner Year of construction 2020 L= 4700 mm W= 1500 mm H= 1900 mm G= approx. 1.6 to Power 350 KW Admission 86° Outlet 72° Volume flow 23 m³ / h Price € 14,500 + VAT little run Very good condition

Used line for the production of cottage cheese and cream. New: 2010. The line includes: - cottage cheese preparation section, - coagulation boiler - 10m3, - diaphragm pump - 10 m3/h, - final product preparation section, - whey separator - 10 m3/h, - creamer 09CR02 - 3 m3 (working capacity), - cream dosing system, - FRISTAM pump - 5 m3/h, - input (pulp) dosing system, - FRISTAM pump - 2 m3/h, - static mixer, - product piston pump for Hugart packing machine – 2 m3 / h.

System to sterilize water by using UV-rays.

Equipment: Overpressure,Manufacturer: BERTSCH,Condition: used,Volume: 28,100,Max. overpressure: 1.0,Max. permissible Operating temperature : 100,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2,600,Cylindrical height: 4,594,Total height: 6,800,Wall thickness underbody: 8,Wall thickness cylinder: 5,Wall thickness upper floor: 5,Technical documents: Drawing, various underlays,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN100,Remarks: Cylinder manhole diameter: approx. 600 mm Container with dents in the cylinder

8.500 litre, Stock number: T569, Tank, stainless steel,, closed top, standing on legs., Double jacket., Outer fully welded stainless cladding., Conical top and bottom., Tank cover in the top., Washing wing in the top., Agitator from the top with guide way, excl motor., Flange for agitator in the side., Ø 2200 mm., The tank is slightly deformed on the inside., Litre: 8.500, Material: Stainless steel AISI 304

7.000 litre, Stock number: T3595, Tank, stainless steel,, closed top, standing on leg stand., Tank cover in the top,, agitator from the top with bottom guideway., Ø 2000 mm., Litre: 7.000, Material: Stainless steel AISI 304

We offer for sale a copper cable crushing and separation line consisting of the following components: 1. VOTECS Machine - Model: EZ 611 - Manufacturer: Votecs - Rated Voltage (Nennsp): 400 V - Control Voltage (Steuersp): 230 V - Hydraulic Pressure: 160 bar - Year of Manufacture: 09/2007 - Rated Current: 38 A - Fuse: 50 A - Frequency: 50 Hz 2. SIDMA Overband - Type: Magnetic - Model: OVB 5620 - Manufacturer: SIDMA - Weight: 680 kg - Consumption: 1500 W - Residual Induction: 400 Gauss - Width (A): 200 mm - Conveyor Belt Speed: 1.5 m/s - Year of Manufacture: 2016 3. MITECO - Manufacturer: Miteco - Rated Voltage: 400 V - Full Load Current: 127 A - Frequency: 50/60 Hz - Phases: 3 + PE - Short Circuit Rating: 35 kA - Enclosure Type: IP54 - Year of Construction: 2015 - Normative References: IEC 60439-1, EN 60204-1 Find more here - / Contact us at -

Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller year of construction:2008 Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Manufacturer: Engel Model: ES 1050/250 HLST Year of Manufacture: 1996 Operating Hours: 77640 Clamping Force: 250t Machine weight : 23t Find more here - / Contact us at -

Glass bending furnace system featuring a bending furnace and cooling belt furnace constructed from high-temperature-resistant stainless steel, approximately 30 m in length, designed for segment dismantling, and equipped with an integrated 4-ton crane. Find more here - / Contact us at -