machines and plants for process engineering used for sale (7,535)

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

Manufacturer: Hermann Schwammberger Model: DLMEh 450 / 50 / 3250 Year of Manufacture : 2017 Type of Machine : Hardening furnace strip line Heating Power: 96 kW Total Current: 136 A Rated Temperature: 1,120 °C Certification: CE Find more here - / Contact us at -

Supply air unit with heat exchanger Fabr. Huber + Ranner Type Fe-Vz/9, air flow rate 10,000 m³/h Motor power 0.8 KW ex, Fan speed 2,650 rpm

Supply / exhaust air unit Fabr. Huber + Ranner Type Va-m-V2/8, Fabr. No. A92707/2 ZuP.1 Air flow rate 7,500 m³/min., engine 4 Kn = 1,500 rpm. Fan speed 2,600 rpm combined with: Va-m-V2/8; No. A92 707/2 P1-A1 Motor 3 KW; n = 1,500 rpm Fan speed 2,650 rpm Air capacity 7,500 m³/h

Manufacturer: CSF Inox S.p.A., Montecchio Emilia, Italy Model No.: CS 40-210-2-15/ED ACMPWH8E Material: Stainless steel (AISI 316) Power: 15 kW Speed: 2900 rpm⁻¹ Voltage: 400/690 V Frequency: 50 Hz Design: hygienic centrifugal pump Design: CIP/SIP capable, food-grade Quantity: 4 pieces Location: Helsingborg, Sweden Viewing possible by appointment Mon–Fri.

Manufacturer: Grundfos, Bjerringbro, Denmark Model No.: CRN32-4-A-F-A-E-HQQE Power: 7.5 kW Flow rate: 30 m³/h Speed: 2919 min⁻¹ Voltage: 3 × 400 V Frequency: 50 Hz Pressure range: max. 16 bar / max. 120 °C Degree of protection: IP21 Material: Stainless Steel Type: Vertical Multistage Centrifugal Pump Weight: approx. 60 kg (without motor) Condition: as good as new Location: Helsingborg, Sweden Viewing possible by appointment Mon–Fri.

Manufacturer: York Model No.: YLAA 0301HE Serial number: 80021E971212141 Refrigerant: R410A Capacity: 24.5 kg GWP: 2088 CO₂ equivalent: 51.2 t Supply voltage: 400 V / 50 Hz / 3 Ph Voltage range: 360–440 V Max. permissible pressure: high pressure 43.0 bar / low pressure 27.6 bar System Pressure Test: May 14, 2019 Weight: 2600 kg

Manufacturer: Trane, Charmes (France) Type: RTAD 145 Year of Make: 2005 Refrigerant: R134a Compressor Type: 2 × Trane Helirotor Screw Compressor Rated power: 2 × 91 kW (total 182 kW) Operating voltage: 400 V / 50 Hz / 3 Ph Max. operating pressure: 25 bar Test pressure: 36.9 bar Control: Trane Adaptive Control™ Condenser type: air-cooled, V-arrangement with axial fans Condition: used, fully functional, with signs of wear due to age Application: industrial process cooling, building air conditioning, machine cooling

Manufacturer: Thermal Heat Exchangers Ltd, Ireland Type: HVAC 115A V9 1x2 L(D) NC = 06 + 06 Test pressure: 32 bar Maximum operating pressure: 28 bar Year of Make: 2001 Design: air-cooled condenser with axial fans, epoxy-coated fins for outdoor operation Condition: used Application: industrial refrigeration systems, process cooling, NH₃ or HFC systems Location: Helsingborg, Sweden Viewing possible by appointment Mon–Fri.

Güntner air-cooled NH₃ condenser Manufacturer: Güntner GmbH, Fürstenfeldbruck Medium: NH₃ (ammonia) Total capacity: 104 litres Permissible operating overpressure: 28 bar Permissible operating temperature: –80 °C to +120 °C Pressure test: 28 bar at +80 °C Year of Make: 1998 Design: air-cooled condenser with several axial fans Condition: used, in working order, with visible signs of wear Application: industrial NH₃ refrigeration systems, process cooling Location: Helsingborg, Sweden Viewing possible by appointment Mon–Fri.

Manufacturer: Climaveneta Type: FOCS/B 2642 Quantity: 3 pieces Refrigerant: R134A Refrigerant charge: 2 x 55 kg per unit Operating weight: 5 340 kg per unit Compressor type: semi-hermetic screw compressors Oil type: Bitzer BSE170 Electrical connection: 400 V / 3 Ph / 50 Hz Max. operating pressure: high-pressure side 2.8 MPa / low-pressure side 2.0 MPa Condition: used Application: Process cooling, building air conditioning, industrial plants Location: Helsingborg, Sweden Viewing possible by appointment Mon–Fri.

Paint Mixer Olbrich RM 501; cleaned and tested; suitable for 0.5 to 10kg cans. Ink mixer Olbrich RM 501; cleaned and checked; used for 0,5 till 10kg cans.

Manufacturer: ABB Coiltech Type: Air Cooler/Heat Exchanger Year of Make: 2000 Designation: KMK 1 Design: industrial air cooler with fan and V-shaped heat exchanger block Material: galvanized steel frame, aluminum slats Condition: used, functional, single slats with signs of wear Application: Process cooling, heat recovery, industrial plants Location: Helsingborg, Sweden Viewing possible by appointment Mon–Fri.

2 pcs ONDA Plate Heat Exchanger CT 354/S The heat exchangers are part of a refrigeration centre with three chillers, which are also for sale. They were used for the hydraulic separation between the chiller circuit and the heating/heat recovery circuit. Manufacturer: Onda Type: CT 354/S Year of Make: 2009 Location: Schierling Viewing possible in the week between 10/11 and 14/11 by appointment.

Used microfiltration system made by Membra Flow with ceramic membranes, program Simatic, capacity 12.000 liters / h. After general renovation and service it was taken out of production (not working again).

The pumps are part of the hydraulic peripherals of a refrigeration unit that is also for sale. One pump is responsible for the heat recovery condenser heat and one pump for the heating circuit 45/40 °C Manufacturer: KSB Frequency converter: PumpDrive 2 Condition: used Location: Schierling Viewing possible in the week between 10/11 and 14/11 by appointment.

Two identical Blitz compressors are available. Motor power: 22kW, max. operating pressure: 10bar, flow rate: 3m³/min, weight: approx. 500kg. Documentation available. An on-site inspection is possible.

Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible.

For Sale: Mahler Continuous Furnace with Güntner Cooler Mahler Continuous Furnace - Manufacturer: MAHLER - Type: DLE 800/220/3000 G - Heat Power: 172 kW - Nominal Temperature: 1120 °C - Year of Construction: 2014 - Certification: CE Güntner Cooler - Manufacturer: Güntner - Model: GFDC WD 080.1/14-42-3980105M - Year of Manufacture: 2021 - Volume: 133.6 liters - Max. Permissible Pressure: 10 / 0 bar - Permissible Temperature Range: -50 °C to +100 °C - Ambient Temperature Range: -30 °C to +50 °C - Fan: VT03061U.1 / 2448 / 630 min⁻¹ / 2.1 A - Test Pressure: 11 bar (Compressed air) - Test Date: 2021-03-15 - Fluid Group / State: 2 / Liquid Find more here - / Contact us at -

Find more here - / Contact us at -

8.200 litre, Stock number: T4011, Litre: 8.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 3 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm., Turbolence plate: 3 pcs., Agitator: Yes, Agitator type: 2 pcs. 3-bladed propeller, D 550 mm., Agitator placement: From the top, Motor: 0,37 kW - 400 Volt - 119 rpm., Working temperature: -10/143° C, Working pressure double jacket: 6 bar, Inner diameter: Ø 1900 mm., Outer diameter: D 2050 mm., Total height: 5330 mm., Manufacturer: Vamdrup Rustfrit Stål, Year: 2001, Other: 2 pcs. tank plates

Stock number: PM2079, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: SMH60 D8

Stock number: PM2078, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless foundation, Motor: 4 kW - 380/560 Volt - 1435 rpm., Theoretical capacity: 14000 l/h, Stage: 1, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Manufacturer: Mono, Type: MH60 D8/B