other storage equipment used for sale (2,562)

High-pressure clamp vise MC2 / 200ORIGINAL PRICE: ~ $1,650.00Description:- Body made of cast iron FCD 65, jaws made of steel- Ground on the bottom and sides- Anti-lift mechanism- Built-in pull-down mechanism- Mechanical force amplification, seal-free and maintenance-free- Short design- Clamping force can be presetTechnical data:Jaw width: 200 mmVise opening: 300 mmJaw height: 55 mmDimensions: 600 x 180 x 210 mmWeight: approx. 90 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 33 pieces Corlettes, Cordes, width 2.47m (2.50m) - used - : Prices per piece from location: 99.-€ (net)! Manufacturer: Cordes Type: Corlette Year of manufacture: unknown Load capacity: 600kg Metrics: Height: 180cm Width: 247cm Depth: 115cm Foldable Stackable With runners Color: Blue Intermediate floors: No Condition: good (3 – 4) Available: immediately Location: Heilbronn

TECHNICAL SPECIFICATIONS Description: Bulk Silo, Sand Silo Capacity: approx. 90 cbm Diameter: 6,000 mm Total height: approx. 8,500 mm Height of silo body: approx. 4,500 mm Discharge height: approx. 4,000 mm Support beam: 30x40 cm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - Suitable for truck loading

TECHNICAL SPECIFICATIONS Number of silos: 4 pcs. Number of lanyards: 2 pcs. COMPOSED OF - 3 loading silos of approx. 90 cbm each - Diameter: 5,800 mmm - Hot-dip galvanized steel substructure - 1 loading silo with approx. 115 cbm - Diameter 7,000 mmm - 1 pc. take-off tape, AA 21,500 / BB 800 mm - 1 piece loading conveyor, AA 18,000 / BB 800 mm - Discharge height: approx. 4.0 m - Incl. weighing system

approx. 10 pieces spring floor trolley, Zarges, 195 L – used - : Price per unit: 495.-€ (net), ex location! Minimum order 5 pieces! Manufacturer: Zarges Type: 40645, Suspension Floor Trolley W 161 Year of manufacture: unknown With push bar Item no. Inner Length (approx. mm) Inner width (approx. mm) Inner height (approx. mm) Outer Length (approx. mm) Outer width (approx. mm) Outer height (approx. mm) Set for payload (kg) Volume (liters) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21,0 equipped with 4 swivel castors in corner arrangement. Original price: approx. 1.500.-€ Condition: good Available: immediately Location: Attenweiler

Volume measuring device incl. weight recording for master data entry, Bosche – used - : Price from location: 8.500.-€ (net)! Manufacturer: Bosche Wägetechnik Type: zippcube Should be size M S/No.: Z201900158 Year of construction: should be 2019 Max. 50kg 16-20 V/DC Weight scale: 110kg With HMI 12 display Combined volume and weight detection in a single pass Ideal for master data acquisition with space measurement Original price: approx. 20.000.-€ (net) zippcube M | Volume and weight detection up to 50 kg. Robust design, precise load cells and intuitive software for efficient logistics. Condition: good Available: immediately Location: Biberach

TECHNICAL SPECIFICATIONS Number of silos: 3 pcs. (identical) Capacity: approx. 200 cbm/pc. Diameter: 6,500 mm Silo body height: 8,500 mm Cone height: 4,000 mm Total height: approx. 10,500 mm Bolted: yes SPECIFIC COMMENT - Hot-dip galvanized steel substructure - At the cone precipitation drainage

weight max. in kg: 1600 kgfork length: 1150 mmstroke height: 200 mmhigh: 1150 mmweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,8 x 0,73 x 1,3 mincl. chargerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 1600 kgfork length: 1450 mmstroke height: 200 mmhigh: 1150 mmweight of the machine ca.: 0,68 tdimensions of the machine ca.: 2,05 x 0,72 x 1,15 mincl. chargerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Item: Defoaming tanks Quantity: 42 Material: Mild steel Dimensions: 3500mm (H) x 1800mm (D) Others: a. 2 holes DN 65 top for inlet chemical b. 1 hold DN 65 bottom for outlet chemical c. Main hole 500mm for maintenance d. 1 set of organic class level indicator with 2 cupper ball valves DN 25 connecting with the tanks e. 1 set of 4 legs to support for tanks f. Painting layer: 1 primer layer + 1 grey finishing layer

Item: PU Storage tanks with filter boxes Quantity: 6 Material: Stainless steel Dimensions: 2300 mm (H) x 1800mm (D) Others: a. 1 hole DN 65 bottom for outlet chemical b. 1 set of 6 wire mesh filter boxes with dimension: 40cm W x 40cm L x 10cm H c.Tank cover ( movable) with handle and hinge d. 1 set of 4 legs to support for tank e. One 150mm hole on top for stirrer

a. 1 hole DN 65 top for inlet chemical b. 1 hold DN 65 bottom for outlet chemical c. Main hole 500mm for maintenance d. 1 set of organic class level indicator with 2 cupper ball valves DN 25 connecting with the tanks e. 1 set of 4 legs to support for tanks f. Painting layer: 1 primer layer + 1 grey finishing layer g. 1 air vent 30mm

approx. 150 pieces Corlettes, Cordes 2.40m - used - : Prices (net) per piece from location: 139.-€ Manufacturer: Cordes Type: UC-240.500 Year of construction: approx. 2000-2022 Load capacity: 800kg Metrics: Height: approx. 2.50m (approx. 80% of the number of pieces), rest approx. 1.80m and 1.50m high Width: 2.40m Depth:1.10m Foldable Stackable: 3 compartments without runners Color: Blue Intermediate floors: only a few Condition: good Available: immediately Location: Ravensburg

approx. 100 stacking and transport containers with crane eyelets, 850 x 550 x 500 mm – used -: Price per piece from location: 59.-€ (net)! Manufacturer: unknown Type: unknown Year of manufacture: unknown Stacking and transport containers with crane eyes Sheet steel, grey lacquered Outside approx. 850 x 550 x 500 mm Inside approx. 755 x 450 x 370 mm Net weight: approx. 38 kg Load capacity: 2 to Load: 10 tons Condition: good, dirty, oily, used with signs of use, paintwork may be partially damaged, printed / painted company logo, label and adhesive residues possible, partly rusty Accessible from all four sides Available: immediately Location: 72669 Unterensingen

The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

A non-automated BITO pallet racking system is available. Bay width: 3600mm, max. shelf load capacity: 2300kg, shelf spacing: 1725mm, upright type: P20, load carrier: Euro pallet, pallet dimensions X/Y: 1200mm/800mm, pallet weight: 500kg, max. bay load at 1725mm buckling length: 16000kg. Documentation available. An on-site inspection is possible.

A mobile pallet racking system BITO is available. Upright type: P20, compartment distance FA1/FA2: 1725mm/1725mm, bay width 1/2: 2700mm/3600mm, beam type 1/2: PT27.82LN/PT36.127LN, load carrier: Euro pallet, dimensions X/Y: 1200mm/800mm, weight: 500kg, max. compartment load: 1500kg/2000kg, max. bay load at 1725mm buckling length: 12000kg/16000kg, top storage level: 5175mm+215mm, max. carriage load: 120000kg, mobile racks: 6, carriage depth: 2650mm, carriage length: 27966mm, transfer carriages: 2, max. travel speed: 4.5km/h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.

Towing capacity: 6000kg, platform load capacity: 150kg, rated tractive force: 1200N, max. tractive force: 6500N, travel speed with/without load: 20km/h/12km/h, axle load front/rear: 550kg/860kg, wheelbase: 1190mm, track width: 860mm, turning radius: 1650mm, machine dimensions X/Y/Z: approx. 1850mm/1000mm/2100mm, weight: approx. 1800kg. Including 4 trailers. Documentation available. An on-site inspection is possible.

A modular narrow-aisle combination forklift Linde is available. Load capacity: 1100kg, load center: 600mm, wheelbase: 1730mm, lift height: 7200mm, overall height: 4900mm, mast: duplex, transport width/length: 1450mm/3350mm, weight: approx. 8200kg, battery weight: approx. 1600kg, operating hours: 1236h. Documentation available. An on-site inspection is possible.

approx. 221 pieces corlettes / multi-box, width 2m/ 2.50m / 2.70m, partly stackable - used - : Prices (net) per piece from location: 149.-€ Price (net) Type 3 – stackable: 169.-€, per piece ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 pieces (complete sale only) 250 x 115 x 180 Color: Blue Type 2 = 2 pieces 270 x 115 x 240 Colour: green Type 3 = 192 pieces, of which approx. 62 pieces can be stacked Minimum order: 10 pieces 200 x 115 x 180 Colour: blue Type 4 = 14 pieces (complete sale only) 270 x 115 x 188 Colour: green Condition: good Available: immediately Location: 63128 Dietzenbach

Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.

: 4 St.: 2 St.Plate thickness: 45 mmtable length: 2000 mmrange L-W-H: 2000 x 700 x 900 mmweight: 152 ca. kg.Furnishing:- brand new workbench- Multiplex worktop 45 mm with surrounding edge- left: 3x drawers- right: 1x drawer, 1x doorin COLOR: BLUE / GREEN OR GRAY available!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lifting force: 5,0 theight: 585 mmwidth: 230 mmweight of the machine ca.: 25 kgFurnishing:- high precision according to the OIML R 76 standard- calibratable- Tare over the full range- works via direct display operation as well as via theremote control- Including remote control up to 10 m range and calibration function- bright and easy to read LED display with 30 mm high digits- Value can be held and frozen- The net weight can easily be determined using the tare function- Totalizing function for series weighings0- automatic shutdown function- Overload warning on the display- Power supply via internal battery 6V / 10Ah, included in delivery, easy to swap and charge Model with 10 to. Lifting capacity also availableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 250 kgarm length: 4000 mmheight: 3425 Unterkante Auslegertotal column height: 4.025 mmswivelling range: 270 GradTotal weight, approx.: 375 kgDescription:- Load capacity 250 kg- projection 4000 mm- Construction height 4025 mm- Crane lacquer in color RAL 1007 daffodil yellow- Calculation basis DIN 15018- Crane classification H2 / B2- Operating location hall operation- Size / bracket profile LS36 / FormC 110x90- Height of the lower edge of the boom 3425 mm- Operating voltage 3 / PE ~ 50 Hz 400 V- Direct control type of control- Degree of protection IP55- Swivel range, nominally 270 °- Panning by handincluding:- Anchor rods size LS 36- Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for- Fastening to the foundation, including accessoriesElectric chain hoist:- Chain hoist type GM 2 250.6-1, 1-leg- painted in color RAL 5017- traffic blue- Load capacity 2 ...

weight max. in kg: 500 kgarm length: 4000 mmheight: 3425 Unterkante Auslegertotal column height: 4215 mmswivelling range: 270 GradTotal weight, approx.: 550 kgDescription:- Trolley power supply- Trailing cable, cable slack approx. 800 mm- Operation from the hallway using a pendant controlincluding:- ABUS electric chain hoist- Chain hoist type GM 2 500.4-2, 2-leg- painted i color RAL 5017 traffic blue- load capacity 500 kg- hook path 3000 mm- highest hook position 2965 mm- Calculation basis FEM 9.901- Drive group 2m / M5- Lifting, 2-stage (pole switchable) 1/4 m / min- Lifting power 0.09 / 0.35 kW- duty cycle 60% ED- Circuits 360 c / hOverload protectionThe crane system complies with the requirements of the Machinery Directive 2006/42 / ECas well as the currently valid UV regulations DGUV regulation 52(formerly BGV D6).included :- Anchor rods L200 (set) size LS 200- Consists of 8 pieces M ...

weight max. in kg: 1000 kgarm length: 4000 mmheight: 3000 Unterkante Auslegertotal column height: 3790 mmswivelling range: 270 GradTotal weight, approx.: 525 kgDescription:- Trolley power supply- Trailing cable, cable slack approx. 800 mm- Operation from the hallway using a pendant controlincluding:- ABUS electric chain hoist- Chain hoist type GM 4 1000.5-2, 2-leg- painted in color RAL 5017 traffic blue- Load capacity 1 t- hook path 3000 mm- highest hook position 2442 mm- Calculation basis FEM 9.901- Drive group 2m / M5- Lifting, 2-stage (pole switchable) 1.3 / 5 m / min- Lifting capacity 0.22 / 0.9 kW- duty cycle 60% ED- Circuits 360 c / hOverload protectionThe crane system complies with the requirements of the Machinery Directive 2006/42 / ECas well as the currently valid UV regulations DGUV regulation 52(formerly BGV D6).included :- Anchor rods L200 (set) size LS 200- Consists of 8 pi ...

: 6 St.: 100 kgrange L-W-H: 705 x 736 x 1019 mmweight: 126 kgFurnishing:- Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm- drawer extension 88%- Usable dimensions inside: 600x600 mm- lockableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.