rubber machines used for sale (407)

Leica MC 120 Microscope

Key data: 50 mm

50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm

Chiller 120KW Model ICS Unit: 1 off Aptus ATXA 046 G SE SN R454B LOW GWP refrigerant Air Cooled Chiller Design Criteria - A: 120kW at 6°C / 12°C / 35°C with Run / Standby HH Pumps & Buffer Tank Thermal duty - cooling 120kW Fluid type Water/Glycol Fluid supply temperature 6°C Fluid return temperature 12°C Site External Year 2022

Rius Yarn Winding Machine MTP- 600x300 Date: 07-05 380volts 50Hz 3 phase Manufacturer’s description Spooling and measuring machine, for special tapes as technical foams and cords The product can either be elastic or rigid Electronic frequency variator (inverter) Pre-choice electronic meter counter Electronic adjustable traverse motion up to 60 mm Beam blockage by means of pneumatic system, by pedal Positive feeder, synchronized with the main axis, and located in the center of the beam Automatic elevation movement of the thread-guide, according to the diameter of the beam Tachometer with speed indicator Start-up and stop by means of pedal The frame is mounted on wheels for an easy displacement of the machine.

Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm

Combex 90 Strainer Extruder Manuf.: AZ / VMI Screw diam. 90mm LD ratio 10-1 AC motor 37kW 1475rpm Year 2010 Complete with Temperature Control Unit and Controls Full manual / documentation available

Key data: 160 liter

Qty 1 x Carter MK6 banbury internal mixer, Original year of manufacture 1995, New body 2012, Mixing chamber volume: 160L, Batch size: approx 150kg, Pneumatic hopper, 2 wing tangential rotors, S.S.A type dust stops, Hydraulic drop door discharge with linear actuator and spade latch, Pneumatic hopper, David Brown Semi-unidrive gearbox (1300rpm input, 50.4rpm output). Gearbox ratio 25.8:1, Power Rating 600kW. Complete with hydraulic powerpack and lubrication unit. Only used for softer compounds and in good condition. Currently without motor or electrical controls (can be quoted if required).

Key data: 80 liter

Qty 1 x Farrel Pomini model F80 banbury mixer, Serial number: 82/92, Original year 1981, but overhauled in 2011, Standard 2 wing rotors, FYH dust seals, Pneumatic hopper, Hydraulic drop door, Unidrive gearbox, 250HP fixed speed AC motor and starter, Rotor speed 35rpm, Upgraded operator controls (new in 2011). Complete with hydraulic unit and lubrication system. In good working condition.

IRHD Wallace Hardness Tester

Wallace Micro Indentation Tester

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

Presses Manufactured by JR Dare Model PR100X2 Tonnage can be set between 20 and 100ton Platen size 16” (400mm) x 16” (400mm) Daylight 400mm. Pressure can be changed Bumps cycles platen temperature all programmable Mitsubishi controls 1x pump unit per pair of Presses Dims: 2.4m long x 1m deep x 2m high

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

REP Press Model V58Y10W Injection volume 1000ccm Platen size: 500 x 630 mm Year 2006 Power: 2550 kN Operating hours: 14570 Moveable traverse Fix traverse Sliding Table

Guilopress

Autogil Cutter

John Marshall Cutter

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

LBBC Steam Autoclave 800mm diam. x 1.2m long Quick Lock Door Hydraulic Test Pressure 180psi Safe Working pressure 120psi Welded construction

VF600 MK3 Shadow Graph Manufacturer: Starrett Horizontal Travel 8" (200mm) Vertical Travel 4" (100mm) Focus Travel 4" (100mm) Top Plate 16" x 9" (400 x 230mm) Glass Insert 9-1/4" x 5-1/2" (235 x 140mm) Image: erect and reversed With new screen, curtains & wiper brackets Fully operational / functioning optimally

Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10

LWB Steinl Injection Machine Type VCE -T 500/160 T Clamp power 500 KN Injection volume 160 cm3 Year 2006 6 Bar 400 v 50 hz 26 KW

Marangoni Retread - Ring Tread Machine Length 3200mm Max. depth 2298mm Max. height 2120mm Type sizes min. diam. 710mm / max. 1220mm Weight 3500kgs

Matteuzzi RAS 90 Buffing Machine Computer controlled Buffing machine for retreading DIMS: 12ft long x 7ft wide x 8ft high Weight: 2500kgs

Iddon 75mm Cold Feed Rubber Extruder With roller feed With motor, gearbox and control panel

Oven Make: Gallenkamp Model OMT150 XX1.C

Tung-Yu Cold Forming Press 22” x 24” deep platens 12” daylight Pressure up to 35/40ton Year 2015 Overall dims: 1.2m deep x 1.8m x 2m high Weight: 2000kgs +/-