welding machines used for sale (1,687)

Gun: PH-3N, voltage: 400V, weight: 50kg. Supplied with operating manual, 2x ground cables with clamp BMS/BMK, gas connection, HZ-stud holder, adapter piece and key. An on-site inspection is possible.

Farmer EL2100 Welder 230 and 400V With cooling fan and driving equipment

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: ARO Type: M 302 Year of Make: 1971 No. 1063655 380 V ~ 50/60 Hz E 100 100 All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Spot welding gun --- Rated power at 50%ED: 22kVA Short circuit current: 17kA Electrode force: 360daN / single stroke Projection: 95mm --- - Electrode arm AE/2/96g + C34/2/63g --- Welding control: on request --- Spring balancer on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 25 kp, 150 , 120

Rated power at 50%ED: 25kVA Short-circuit current: 12kA Electrode force: 120daN / single stroke Projection: 150mm --- Welding Control: AR.01 (5 times, 2 program) --- Incl. additional options: -Foot switch -Main switch - Mounted on aluminium plate --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 40 kp, 550 , 390

Rated power at 50%ED: 40kVA Short-circuit current: 26.2kA Electrode force: 65-390daN / single stroke Throat: 250-550mm --- Welding control: MPS 10 (5 times, 8 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 63 kp, 750 , 600

Rated power at 50%ED: 63kVA Short-circuit current: 26.3kA Electrode force: 65-390daN / single stroke Throat: 450-750mm --- Welding control: MPS 15036 (5 times, 1 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg  ...

KAWASAKI BA006L-A robotic welding cell was built in 2021. The system is designed for fully automatic MIG/MAG arc welding. All the necessary equipment and machinery with the best technical specifications are integrated inside an enclosed, fully ventilated structure. The robotic welding station consists of the following components: – robot arm: KAWASAKI 3BA006L-AC01 – welding positioner: ASTOR PST250E-H1 (2 pcs.) – MIG/MAG welder: FRONIUS TPS 400i – wire feeder: FRONIUS WF 25i REEL R /4R/G/W – push-pull drive unit: FRONIUS WF 60i Robacta Drive CMT/W – cooling unit: FRONIUS CU – welding fume extraction unit: KEMPER FilterCell XL (2 pcs.) – light curtains: SICK – fixed covers with safety switch The machining process is performed by a KAWASAKI 6-axis robot, distinguished by its sophisticated design and robust arm with an increased range of movement. It coopera ...

KAWASAKI BA006L-A robotic welding station was built in 2022. This system, composed of devices and machines with the best technical parameters, is the perfect choice for fully automatic arc welding using the MIG/MAG method. All the components of the station are integrated inside an enclosed structure. The machining process is performed by a KAWASAKI 6-axis robot distinguished by, among others, its sophisticated design and robust arm with an increased range of movement. In order to achieve excellent dynamic movements combined with high process reliability, each of its six axes is driven by efficient servo motors. What’s more, a number of state-of-the-art systems ensure uninterrupted operation of the machine, without any downtime. The entire workspace is ventilated from welding fumes by powerful KEMPER extraction units. This solution significantly improves overall safety and comfort ...

A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.

A CNC 6-axis laser precision machine for non-contact laser processing and measurement of complex geometries, particularly in the tool and mould making industry, is available. Travel X/Y/Z: 300mm/400mm/500mm, table dimensions X/Y: 300mm/400mm, axes mechanical/optical: 3/3, measurement system: non-contact SI sensor, measurement accuracy: +/-0.01mm, surface finish: Ra under 1µm, operating hours: 21045h, processing hours: 6549h. The laser (Prisma) is defective. Documentation available. An on-site inspection is possible.

Peco Welding Machine Spot Welding Machine Peco welding system welding of flat strip and electr. Management Peco LA 40 Air Control Bosch E35... DYF welding control You can find more welding systems in other sizes - new and used - in our shop! International shipping costs on request!

welding current: 20 - 100 Acutting capacity: max. 35mm mmopen-circuit voltage: 250 VRequired air-pressure: min. 4 barconnected load: 20 KVAconnected load frequency: 400 Vweight: 0,7 kgDimensions (LxWxH): 1,0 x 0,6 x 0,8 mmPlasma cutting machine with cart- Includes 7m hose package- Spare nozzlesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: 30 - 100 Acutting capacity: max. 50mm mmopen-circuit voltage: 170 VRequired air-pressure: min. 4 barconnected load: kWconnected load frequency: 400 Vweight: 0,75 kgDimensions (LxWxH): 1,2 x 0,7 x 1,0 mmPlasma cutting machine with cart- 105 RTX torch- Includes 7m hose package- Spare nozzles- Like new, ready for immediate useThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ZASO MSA-4PS beam welding line was built in 2009 in Poland by ZASO Polski Sprzęt Spawalniczy. The machine enables precise longitudinal welding of, among others, plate girders, T-beams, I-beams and H-beams, using the MIG/MAG or SAW method. The applied technical solutions fully automate the process, with the guarantee of obtaining the highest quality welds. The machining process is performed by two torches with integrated correction slides, which allow them to be moved remotely in two axes. A special frame clamp system holds the welded parts throughout the process, without the need for preassembly or the use of special tooling. The overriding control system also synchronises the work travel with the welding power sources. The ZASO automatic welding machine is also distinguished by its modular work table, consisting of up to five modules, each 6 m long. It has an integrated cooling s ...

A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible.

table length: 2400 mmtable width: 1200 mmtable height: mm: 4000 kgheight of stroke: 510 - 1550 mmtotal connected load: 1,5 kWconnected load frequency: 400 Vweight of the machine ca.: 0.95 tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC CO2 Laser Cutting Machine Bystronic Bystar 3015 Laser source: ByLaser 4400, Laser power: 4400W (4.4kW), Working area X/Y/Z: 3000mm/1500mm/170mm, Max. workpiece weight: 890kg, Positioning accuracy: +/-1mm, Repeatability: +/-0.05mm, Rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Max. sheet weight: 160kg/m². Control: ByVision CNC, Video on request

Offer 25238 Specifications: - Max. load capacity with horizontal table top 350 Kg - Max. load capacity in all inclined positions 300 kg - Face plate diameter 400 mm - Through-hole / hollow shaft 125 mm - Face plate manually swivels left + right 0 - 90 ° - Rotary movement infinitely variable approx. 0.15 - 5.0 1/min - Right + Counterclockwise - E. footswitch - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 900 mm - Space requirement approx. W 1150 x H 900 x D 800 mm - Weight approx. 290 kg - Jaw chuck 250 mm

Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible.

A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible.

table length: 2400 mmtable width: 1200 mmtable height: 200 mmbore: 28 mm: 100 x 100 mmmaterial thickness: ca. 24,5 - 27 mm: 200 mmwork height max.: 850 mmProduct description:Siegmund retro offer incl. accessories:>.- high-quality steel S355J2+N + plasma nitriding- Drill holes in side panel in diagonal grid- Corners, edges and drill holes bevelled 45- Construction reinforced by ribs- incl. base basic equipment 650 mmAccessories:- 6 x Professional screw clamp, nitrided- 2 x stop and clamping angle 175 L nitrided- 10 x quick-clamping bolts without groove, double burnished- 8 x universal stop 225 L nitrided- 2 x stop and clamping bracket 500 G nitrided- 1 x accessory setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bystronic Bysprint 3015 Fiber 4 KW Working area : 3000mm x 1500mm With interchangeable table Laser on: 21,000h Including Airco nitrogen generator at call

CNC Plasma Cutting Machine MGM Arrow 2000-4 , Year 2008 Control: MS 100 Working Area : 2000mm x 4000mm 1 x Plasma Kjellberg HiFocus 160i with automatic gas console - incl. extraction 5500m³ built in 2006 / MGM - incl. declaration of conformity - incl. tech. Documentation - Incl. various nozzles (spare parts) at call

3 KW Fiber Dimensions round cross-sections (min.–max.) 10–130 mm Square dimensions Cross-sections (min.–max.) 10 × 10–130 × 130 mm Dimensions of other cross-sections (min.–max. length of sides) 10 × 10–130 × 130 mm Max. pipe weight 17 kg/m Loading length 6,500 mm Unloading length 4,000 mm Cross-sections round, square, rectangular, oval, closed standard profile very few hours

MicroStep CNC Guide Machine SPL-P3001.20 with a plasma source HiFocus160i with automatic gas console from Kjellberg. Cutting ranges: Sheet thicknesses from 0.5mm to 40mm in the field of structural steel. Bujpvvuoft Sheet thicknesses from 1mm to 35mm, in the area of aluminium and stainless steel. The plasma cutting machine type SPL is a numerically controlled machine designed for material separation by plasma jet cutting. The machine is functional and is currently in use in production. The usable area of the cutting table is 3000mm x 1500mm. Expandable in width by 500mm by means of grid inserts in the shaft of the pipe cutting system. Including RSV 300 pipe cutting machine Including 3 interchangeable heads for Percut 170. Wear parts worth approx. 3,000 euros In addition, a Kjellberg 160i plasma cutting machine as a replacement. MSNC 500 control system Pre-installed ...

Machine configuration 1. 6kw Raycus Fiber Laser Source 2. HSG Laser Cutting Head P10 3. HSG Alpha T-Bus Control 4. HSG-NEST nesting software 5. Monitor with touch function 6. Aluminum crossbeam 7. Hiwin Linear Guide 8. Inovance servo motor and driver 9. SMC Oxygen Control Valve 10. Collision protection 11. Automatic lubrication 12. Ergonomic remote control 13. WLAN / LAN connection 14. Electronic components from Schneider, Eaton and Noark 15. Pneumatic components from Aventics 16. Fault monitoring of the main machine, laser source as well as chiller 17. Cutting gas low pressure alarm function 18. Water Chiller 19. Extraction system Interchangeable table system: 1500mm x 3000mm Further configurations are available with regard to the fiber laser power output and the processing area