welding machines used for sale (1,698)

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

table length: 2000 mmtable width: 1000 mmtable height: 920 - 1000 mm: 2000 kgheight of stroke: max. 1525 mmtotal connected load: 1,5 kWconnected load frequency: 400 Vweight of the machine ca.: tWelding table on lifting table:Hole diameter: 28mmThe table is made of 15mm thick S355 steelThe surface is stained and oiled.Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides.Side panels 150 x 10mmRibbed bottom for reinforcement.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1000-N QiLin The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multipl ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-3000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

Manufacturer: Trumpf Type: TruDisk 5001(6C) Year of construction: 2018 Laser power: 5 kW Wavelength: 1030 nm Beam quality: 4 mm mrad Location: Dresden Optionally, the laser optics PFO 33-2 R1030-1070 HA as well as other accessories are available from us!

table diameter: 180 mm: 10 Kg: 5 Kgchucking diameter: 65 mmturning speeds: 2 - 10 U/minswivelling range: 90 Gradtilt adjustment: manually/mechanicall: manuell connected load frequency: 230 Vweight of the machine ca.: 15 Kgdimensions of the machine ca.: 400 x 400 x 400 mwelding turntable with- Quick chuck 65mm- foot switch- tilting/pivoting by hand- Speed continuously adjustableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Month ...

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Offered out of insolvency is a DC TIG welding machine EWM Tetrix 301 Activarc with Comfort T3.24 control Year of construction 2009 spotarc/ second pulse 2/4 stroke Water cooling Welding range 5-300Ampere 300Amps at 60% ED 250Amps at 100% ED Bzn9kovxtp 8meter hose package, with ground cable and pressure reducer

From operating resolution: Kjellberg TIG 321 AC/DC Year of construction 2013 Pulse function HF Ignition Water cooling Welding Range: 5-320Amp Gyg2uk 320Amps at 45% ED complete, with 4meter torch, ground cable and pressure reducer Dimensions in mm approx. 1100x510x810 --Very neat device-

From operating resolution: Pulse welding system Cebora EVO Speed Star 380 TC Specifications: Control Sound Digibox MIG P4 Welding range 10-380 amps 310Amps at 100% ED 4 Roller feed Water cooling TIG welding possible in the DC range Feed rollers 1.2mm Burner 4meter with 1.0mm wire, ground cable and pressure reducers-- Dimensions in mm approx. 950x850x1020 Operating instructions

From operating resolution: Selco Genesis 352 GSM DC Device No.007410000118 with water cooling Welding range 6-350 amps 350Amps at 60%ED 270Amps at 100% ED 380 volts with 8meter burner AQ 18F with flexible head and ground cable Adjustable pulse function RF Ignition 2/4 stroke

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable

From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-

Stock number: 3876 WELDING TURNTABLE Manufacturer: ESAB, Type: MLA 500 Machine NO.: 414767 Specifications: Large workpiece weight 500 kg Infinitely variable table rotations. pr/min Horizontal / Vertical Length: 1200 mm, Height: 800 mm, Width: 800 mm, Weight: 500 kg

Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence

table load: 110 Kgtable load capacity: 55 kg. vertikaltable diameter: 250 mmhollow spindle diameter: 65 mmchucking diameter: 200 mmswivelling range: 0 / 30 / 60 / 90 Gradturning speeds: 0 - 8 stufenlos U/mintotal power requirement: 0,15 KWweight of the machine ca.: 25 Kgdimensions of the machine ca.: 0,5 x 0,53 x 0,6 mWelding turntable with- large passage 60mm- Footswitch- tilt/swivel by hand- Speed infinitely adjustable- 250 amp welding current transmission- Bore in faceplate 60mm.Demonstration machine documentation only in English.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 100 Positionen: 28 mmcondition: neu weight: 280 kgdimensions: 1,2 x 0,5 x 1,3 mXXL starter package, consisting of:- 15x – standard clamping pliers- 5x – multi-clamp pliers- 10x – side tensioners with eccentrics- 15x – Loose cam H30- 10x – Loose cam H100- 2x – pipe insertion cam series- 10x – quick release bolts- 10x – stop block 15mm- 4x – Right Angle XL- 6x – Right angle- 6x – angle of attack- 1x – box- 1x – Insert holder- 1x – Allen key- Tool trolleyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg

Key data: 1500 mm, 3500 kg

Stock number: 3871 WELDING TURNTABLE Manufacturer: ESAB PEMA, Type: 3500 F Machine NO.: A7001, Year of manufacture: 1987 Specifications: Table size 1500 mm Ø Large workpiece weight 3500 kg Gr. rotational torque 3100 NM Infinitely variable table rotations. 0.01 - 0.8 pr/min Hydraulic drive and tip Length: 2000 mm, Height: 1100, Width: 1500 mm, Weight: 1200 kg

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

Table dimensions: 1000 x 1000 mmtable load: 4000 Kgswivelling range: 105 Gradturning speeds: 0,15 - 1,5 U/minheight adjustment: 1010 - 1836 mmhollow spindle diameter: mmwelding current: 1000 Amperemax. torque on the faceplate: 8000 Nmtotal power requirement: 6,0 kWdimensions of the machine ca.: mCharacteristics:• Made in EU• Self-locking gear, therefore no leading and trailing at eccentric load• Hydraulic height adjustment allows almost limitless positioning• Electronic quality components from Schneider / Siemens / Delta• Frequency-controlled stepless speed of the turntable• High stability through a heavy and compact design• CE certificate• Very good value for money• Standard version comes with remote control and dual foot pedal• 3 years warranty (see warranty conditions)• Hydraulically height adjustable with locking system (for fall protection)The data for this a ...

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

Machine Type: TIG Inverter Welding Machine gas-cooled DC system Make Jäckle Type TIG 201 i DC Connection voltage 1 x 230 Volt Adjustment range 3 – 200 amps Duty cycle 35% ED at 200 amps 60% ED at 180 amps 100% ED at 150 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 600 x 255 x 440 mm Weight 24 kg Age approx. 10 years Condition workshop-tested, very good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch WHL 17, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 piece of instruction manual Warrant ...

KEMPPI FASTMIG X 450 welding machine built in 2017 in Finland allows for both complex manual welding and efficient mechanised welding using the MIG/MAG method. The specially designed configuration of high-quality components delivers to its user excellent welding quality and performance, with unlimited flexibility for specialised tasks and materials. The KEMPPI FastMig welding machine is the perfect choice for professionals who value speed, precision and extensive machining capabilities. The KEMPPI semi-automatic welding machine consists of the following devices: – welding source: KEMPPI FastMig X 450 – wire feeder: KEMPPI WFX 300 – cooler: KEMPPI Cool X – 4-wheel trolley: KEMPPI PM500 Technical specifications of the MIG/MAG welding machine KEMPPI FASTMIG X 450 Power source - power supply: 3x 400 V (-15% to +20%); 50/60 Hz - maximum current (60%/100%): 450/350 A - ge ...

Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1  ...

welding current: 20 - 60 Acutting capacity: 1 - 20 mmopen-circuit voltage: 104 VRequired air-pressure: min. 4 barconnected load: 7,9 kWconnected load frequency: 400 Vweight: 16 kgDimensions (LxWxH): 480 x 260 x 360 mmDigital display.Surge protection.Plasma torch.Earth cable.Reducing valve with moisture separator.Equipped with IGBT technologyDelivered without CEE plug.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.