ENGEL es used machines

Key data: 11000 kN

ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...

Key data: 2000 kN, 352 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2000 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 450 mm Opening travel: 700 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 352 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2001 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 550 mm Opening travel: 700 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

Key data: 2000 kN, 216 g/PS, 40 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ENGEL Type: ES650H/200W-200HL-2F Year of Make: 2004 Clamping force: 200 tons Tiebar spacing sparless Min. installation height: 500 mm Opening travel: 750 mm Screws DN 1: 40 mm Max. displacement: 251 cm³ Moulded part weight in hp: 216 g Screw DN 2: 25 mm Max. displacement: 69 cm³ Moulded part weight in hp: 60 g Control: CC200 Technical equipment: -Engel robot, type: ERC23/1-E -4 core slides -Turntable control

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

Screw cylinder complete with screw, cylinder head and closure nozzle for ENGEL injection unit size ES3550

Key data: 2500 , 60

ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Engel, steering motor from Jungheinrich ESE 320 G 20-240.54 electric stacker -Type: GNM 5460-G18.5-MIR1 Ser. H -Motor: 24V/240W -Dimensions: 135/130/H365 mm -Weight: 8 kg

Hydro motor for screw cylinders Injection unit size ES3550 Hägglunds Drives type CA50 20 2 0 0 N 004

Key data: 500 , 30

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Key data: 5500 , 80

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

screw size:60 mm closing pressure:3500 kN weight of the machine ca.:25,5 t

ENGEL ES 1350/275 HL ST injection moulding machine was manufactured in 1999 in Austria by ENGEL Austria GmbH. The machine is designed for the economical production of plastic parts in various shapes, colours and for various purposes. This process utilises the injection moulding method, which involves injecting plastified plastic into a closed mould, where the material cools and takes on the mould’s shape. The combination of a high clamping force of 275 tonnes with proven components ensures high efficiency even during demanding series production. The ENGEL ES 1350/275 HL ST is fitted with a 60 mm diameter screw, which is responsible for plasticising the material and precisely feeding it into the injection mould. The ability to operate at increased injection pressure enables the processing of more demanding plastics and the precise filling of moulds with complex geometries. To increas ...

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...

ENGEL VC 80/25 TECH injection moulding machine was built in 2004 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components used both in everyday products and in many industrial sectors. These components are produced using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL VC 80/25 TECH is an excellent solution for both single-unit and series production. The machine is equipped, among others, with a 22 mm diameter screw and a precision mould clamping system with a clamping force of 25 tonnes. Day-to-day operation of the injection moulding machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of in ...

ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...

Ref. no.: 18255 Manufacturer: ENGEL Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ ???? Adv ...

ENGEL ES 200/80 HL injection moulding machine was built in 1998 in Austria by ENGEL Austria GmbH. The machine is designed for the production of plastic components of various shapes, colours and applications. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. The result is precise and repeatable components of high quality. The ENGEL ES 200/80 HL features, among others, a 22 mm diameter screw and a precision mould clamping system with a clamping force of 80 tonnes. All injection moulding parameters are programmed via the intuitive ENGEL CC100 control system, which simplifies day-to-day operation of the machine. The injection moulding machine can also be equipped with production automation systems to increase the efficiency of the e ...

ENGEL ES 80/50 HL injection moulding machine was built in 1996 in Austria by ENGEL Austria GmbH. The machine is designed for the efficient production of plastic components used both in everyday products and in many industrial sectors. These components are made using the injection moulding process, which involves injecting plasticised plastic under high pressure into a closed mould. Once cooled, the material takes on the mould’s shape, resulting in precise, repeatable components of high quality. The ENGEL ES 80/50 HL features, among others, a 25 mm diameter screw and a precision mould clamping system with a clamping force of 50 tonnes. Day-to-day operation of the machine is facilitated by the intuitive ENGEL CC100 control system, which enables precise setting and monitoring of injection moulding process parameters. All this is complemented by an extremely rigid design that maintains  ...

ENGEL INSERT 200H/50 injection moulding machine was manufactured in 2007 in Austria. The machine with its small size and large capabilities is used for e.g. overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the combination of a clamping force of 50 tonnes and high-quality components, the injection moulding machine guarantees excellent quality of inserts and high repeatability. The machine’s sturdy, solidly built construction features a convenient and easy-to-use ENGEL CC 200 CNC controller for entering all possible process parameters, such as mould clamping force and speed. Once the parameters have been entered, the two halves of the mould are precisely closed, after which the vertical injection moulding machine ENGEL generates a high clamping force. The mould cavity is carefully filled with plastic under high pressure using ...

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

Key data: 1100 kN

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...