HERMIS tp used machines

OVERVIEW This Hermis TP-HRW 20 stainless steel tunnel pasteurizer is a new and unused machine, manufactured in 2025, designed for the pasteurization of beer in 500 ml bottles. The pasteurizer has a capacity of approx. 20,000 bottles per hour and is configured as a 10-zone tunnel pasteurizer with heating, pasteurization and cooling sections. The machine is fully made of stainless steel AISI 304 and is equipped with an external plate heat exchanger for the heating system. The process is controlled by a Siemens S7-1200 PLC with a Siemens Simatic 12 HMI touch panel, allowing automatic control of the pasteurization process. The system is designed for a product inlet temperature of approx. +4°C, a pasteurization temperature of approx. +62°C to +64°C, and an outlet temperature of approx. +34°C to +35°C. The pasteurizer provides a total treatment area of approx. 74 m², with a treatment len ...

Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 bph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...

Capacity: up to 30.000 cans or bottles/h, Product : beer and soft drinks

The syrup room is designed to mix sugar with water to a given concentration of the resulting Brix of syrup, heat treatment of the syrup, in order to increase biological resistance. Capacity: until 10 t/h Operating mode: automatic Registration of mixing, pasteurization process parameters Automatic control of temperature, flow, pressure Touch control panels Memory configuration The choice of settings for different operating modes Syrup room consists of: sugar loading into the system unit mixing tank I hot water preparation unit for syrup with distribution panel I filtration unit buffer tank pasteurizer blending tanks with pumping station distribution panel II tank for mixing components cabinet for system control with touch control panel

Heating method: steam or electric CIP is controlled by processor SIEMENS- S7

Flowing pasteurizer for beer, kvas and juice œH&G-10., 20., 30 .....300. Capacity: 10hl/h - 30hl/h Product: Beer, kvass and juice Pasteurizer: plate-type Pasteurizer is controlled by processor œSIEMENS- LOGO

Flow pasteurizer for beer, kvas, and juice œH&G-10., 20., 30,.......300 Capacity: 10hl/h - 400hl/h Product: Beer, kvass, and juice Pasteurizer: plate-type Pasteurizer is controlled by processor SIEMENS- S7

Capacity: 540 bottles /h of 0.5 l. Made from stainless steel. Product: beer, kvass, soft drinks.

production capacity up to 5.000 bottles/cans/h 0,5 L; submersible-shower type automatic; alarm system; for glass bottles, tins and cans; equipped with Italian and German component parts; made from stainless steel;

capacity up to 2..500 bph 0.5l or cans The tunnel pasteurizer is Reversible mode Control Siemens Logo Heating method Steam - Plate heat exchanger in outside of pasteurizer The manufacturer year is 2016, new (It was the model for the exhibition in Brau Beviale)

Tunnel pasteurizer „TP- HRW 10' for canned products. Product: canned pickled vegetables; Salads; Capacity: 1000 – 10 000 PACKING/H material: stainless steel.

Station consists of two cylindrical tanks arranged one above the other and fixed via pipes with a funnel system "vacuum" to dissolve the solids, with the pump and heat exchangers. The capacity of pickle station is 1000 – 1 000 l/h.

Reversible tunnel pasteurizer capacity up to 2.500 bph/cph 500 ml For beer, CSD, and juice

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. The device is designed to work independently in line, for glass and plastic bottles with different capacity. Depalletizer DNB-2022 consists of four components: 1. spring mobile wire rope hoist 2. a gripping head adapted to the type of bottles 3. table - unloading conveyor / adapted to the type of bottles, pallet and the room for the assembly of the depalletizer. 4. a beam made of structural steel attached to the ceiling of the room or mounted on supports. Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to  ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Type TP4 Spindle rotation speeds 20 000 U/Min/rpm Table dimensions 900x770 mm Weight 800 kg Transport dimensions 1800 x1000x1000mm

Centrifugal pump centrifugal pump Brand: Grundfos pump Type: TP 100-70/4 A-F-A-BAQE H: 5.1 m Q: 73,1 m3/h Engine: 1, 5kw 2900rpm Div: NEW in box 2008

Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Status: Used Nr.: PMP01141/9007 A 12-month service is possible; ready for use

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed

Dear's Sale, T/C complate ABB TPS 52 Recon, Good condition Regards +905323642509 info@kscege.com

Good day have with this machine a top TECA print up to 4 colours! Carrée and pad cleaning! Absolute Professional machine. If you have questions just email!

Dear's Sale, T/C complate ABB TPS 57 Recon, Good condition Regards +905323642509 info@kscege

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705