KALLFASS universa used machines

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel and gripper section Kallfass Universa 400 NT built in 2003 The system is immediately available. The price of the complete system includes the Universa 400. The machine is technically overhauled and is in very good condition. Technical data: - Length of transverse welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Automatic length compensation to reduce the punch gap - Welding stamp monitoring - Side welding monitoring - Foil retaining plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable sealing strip - Side weld wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Kallfass Standard shrink tunnel - Gripper section with inline belt - Curved band can be optional ...

Vollautomatische Seitenschweißmaschine zur Verpackung von Produkten – unabhängig von ihrer Länge – mit Volleinschlag und ohne Folienüberlappung. Mit neuem Querstempel. Fully automatic side sealing machine for packaging products – regardless of their length – with full wrap and without film overlap. With new cross seal bar. Vollautomatische Seitenschweißmaschiene mit Einschweißtunnel - Fully-Automatic Side Sealer Kallfass Universa 400 - Mini 400 Year 2004 - Serial-No. M 05.04.226 Anlage bestehend aus / System consisting of: Handanlage / Hand fed Station MGZ 400 Seitenschweißmaschiene / Fully-Automatic Side Sealer Kallfass Universa 400 Einschweißtunnel / Shrink tunnel Kallfass Mini 400 Technische Daten / Technical Data: Länge Querstempel / Length of cross seal bar 450mm Verpackungsleistung [Takte/min] / Production speed max. up to 85 packs/min Produktlänge / P ...

1 piece Kallfass feed conveyor (laying conveyor) Year of construction: 2016, delivered 2017 1 piece Kallfass Universa 500 Servo Year of manufacture: 2016, delivered 2017 1 piece Kallfass Shrink Tunnel Compact 650 DD built in 2017, (2 heating bowls at the top and 2 heating bowls at the bottom) 1 piece of removal belt

Packaging machine Kallfass Universa 5050; good condition; cleaned and tested; Frame size 500x500mm; Passage height 100mm; with Tunnel Compact 650 S; Passage width 650mm; Passage height max.400mm; Cooling fans L-sealer Kallfass Universa 5050; good condition; cleaned and checked; frame size 500x500mm; product hight max.100mm; with tunnel Compact 650 S; working width 650mm; working hight max.400mm; cooling unit.

Size: 550 mm Technical details: Speed: 120 Tacts er minute Equipments: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS® SIMOTION® with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Inchtornado-style Inch hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film  ...

Kallfass universa 5050 sealing machine, kallfass compact 650 shrinktunnel, year 2000, welding width 525 mm, clearance: 150 mm, speed up to 35 cycles per minute, fully automatic

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

Description Item #8445 – SHRINK WRAPPER Manufactured by KALLFASS Model UNIVERSA 500, With a Model Compact 650-SO Shrink Tunnel 650mms wide tunnel entrance, up to 400mms high, 1200mms length, up to 17.5metres per minute. 415volts, 50/60Hz, 3Phase.

Sealer - wrapping machine, Make Kallfass, Model Universa 400 NT, Year 2000, Working width 400 mm x unlimted, Min. Product length 100 mm, Product length Unlimted, Passage height 200 mm, Capacity up to 60 cycles per minute, Working width: 400 mm x unlimted, Min. product length: 100 mm, Max. product length: Unlimted, Passage height: 200 mm, Capacity: up to 60 cycles per minute

Kallfass Universa 8060 Spezial (1999) Type: Automatic L-sealer / shrink wrapping machine Format Max. product size: approx. 800 × 600 mm Max. height: approx. 200 – 250 mm (depending on setup) Material Film type: polyolefin (PO), polyethylene (PE), PVC shrink film Film width: up to approx. 800 mm Performance Output: up to ~25–35 cycles/min (depending on product &, operator) Machine Data Year: 1999 Power supply: 400 V / 3-phase / 50 Hz Compressed air: required Machine type: semi-automatic or automatic (depending on configuration) Equipment / Features automatic or manual infeed (configuration dependent) L-sealing frame (angle sealer) integrated or inline shrink tunnel (optional/combined line) adjustable sealing time and temperature conveyor belt system film roll holder with easy loading electronic control panel safety guards and emergency stop quick format changeover suitable for sin ...

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/450 Universal Year 2005 - Serial-No. VD 12.05.741 Mobile on mobile frame After sealing - automatic transport into tunnel Sehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor

Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...

Shrink Tunnel Kallfass Standard 450 N; State as is; checked only for function; Inlet width 400mm; Pass-through height 200mm; Cooling fan. Shrink tunnel Kallfass Standard 450 N; condition as is; only chekced on function; width 400mm; hight 200mm; cooling unit.

Shrink Wrap/Foil Sealing

Shrink Wrap/Foil Sealing