KHS inno used machines

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

1 of used high-speed film-only shrinkpacker - multi-packer, make KHS, type Innopack SP A-H, new 2013, operating direction right. Used to pack standard and sleek beverage cans as 2x2=4 3-lane, as well as 3x2=6, 4x2=8, 5x2=10 and 4x3=12 dual-lane. Siemens S7 controls, automatic film-splicing. Capacity upto 125 cycles/minute depending on product/configuration.

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

KHS-KISTERS Innopack SP 060 V panel: Simatic Touch Panel; Control: S7; power supply: 230/400 V, 50 Hz; six-track entrance; shrinking tunnel; oil-based central lubrication of the tunnel and packer; ionization. Automatic felling folli. Support for both transparent and printed film. Automatic film bonding. Possibility of packing in one or two lanes depending on the size of the multi-pack format. Supported packaging: glass/PET/can. Operator panel menu: DE/PL/ENG. In our offer we have both right and left machines. Possibility of individual adjustment of formats to customer needs.

Capacity: 70 Tk/h (single track); year: 2009; panel: Simatic Touch Panel; control: S7-300; Power supply: 400 V, 50 Hz, 11kVa; Possibility of mounting handles in one or two ways. Possibility of attaching handles from a magazine or roll. Support for transparent and laminated film. Operator panel menu: DE/PL/ENG. Possibility of individual adjustment of formats to customer needs.

System: KHS Type: Innofill-UM Compacta 40-10KK For bottling juice and spirits Pitch Circle : 1440 / 360 Pitch : 36 Pi Width: 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg System: KHS Type: Innofill-UM Compacta 40-10KK For filling juice and liquor Pitch circle : 1440 / 360 Pitch : 36 Pi Width : 3295 mm Depth : 2330 mm Maximum height : 3690 mm Weight: approx. 8,000 kg

1 of used wrap-around packer, make KHS, type Innopack WP A-H (Advanced, High-Speed), new 2011, operating side left. Siemens S7 controls, Rexroth servo drives. Last used for various round and rectangular PET bottles in multiple configurations, at a maximum speed of 93 cycles/minute. In excellent condition.

34,000 CPH - 330ml in 24 pack Carton 24,000 - 28,000 CPH - 330ml, 440ml in various 2/4/6/8/10/12 Pack configuration Year: 2015 – 2022 Location: Scotland Featured items: FIPAL MINIDEPAL 20 LA DEPALLETISER TWIN LANE RINSER KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH FERRUM F6 6 HEAD SEAMER CSW DEVENTER LID FEED SYSTEM HEUFT SPECTRUM TX EURO SISTEMI CAN DRYERS TELEDYNE TAPTONE INSPECTION ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER FT SYSTEM CP600 TP TUR300 Z200 RAS001 GPI QUICKFLEX 300 MULTI-PACKER HITACHI INK JET PRINTER PACKITAL LANER COMPLETE CONVEYOR SYSTEM FIPAL PAL 80 F PALLETISER ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER Get in touch for pricing and to book a viewing. Indassol

Pasteurizer KHS type Innopas capacity: approx. 25.000 bph with 8 pasteurizing zones working area: 113,5 m² inlet temperature: 15°C outlet temperature: ± 38°C max. pasteurization temperature: 75°C fresh water temperature: 15°C pasteurization time complete: 48,5 min. - warming time: 21,2 min - pasteurization time: 12,3 min. - back cooling time: 15,0 min. including Siemens touch panel and Siemens S 5 PLC dimensions of the pasteurizer: width: 4.210 mm length: 21.000 mm height: 2.750 mm weight netto: approx. 27.500 kgs The pasteurizer is out of production since May 2024 technical details: see pdf document already dismantled and on our stock / Germany very good condition

KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running Direction: Right – Left This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production  ...

KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running direction: left - right This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production vo ...

Scope of delivery: -Valve manifold -Vacuum unit -Hygienic enema -Fill level and closure inspection -Rejection and rejection belt -Technical documentation -Program backup -Extensive carriers available that can be purchased additionally Information without guarantee

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: left. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

1 of used high-seeed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-H, new 2013. Operating side: right. Used for beverage cans diameter 66 and 58 mm in various collations. Siemens S7 PLC with MI-servo controls. Gas-fired shrinktunnel (can be converted to electrical).

1 of used medium-speed film-only shrinkwrapper / multipacker, make KHS/Kisters, type Innopack SP A-M, new 2013. Operating side: left. Used for 500 ml PET bottles in various collations at a maximum speed of 70 cycles per minute (depending on format). Siemens S7 PLC with MI-servo controls. Electrically heated shrinktunnel.

The system consists of a KHS INNOPAL RK6-350 palletizer from 2004, a KUKA KR 360/1 industrial robot and a Siemens Simatic S7 automation controller. The system is suitable for the automatic palletizing of cartons, bottles or PET-packaged products.

Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill DRS-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensu ...

Manufacturer: KHS Model: Innoket Roland 10/4 Year of manufacture: 2009 Bottle type: Square bottles Output: up to 20,000 bottles per hour Label Formats Available - Wet glue labels (VE and RE formats) - Self-adhesive labels Format Sizes - 250 ml - 33 x 119 mm - 500 ml - 36 x 150 mm - 750 ml - 48 x 158 mm Spare Parts - Many spare parts available including stamps, glue roller, scraper, and roller sponges. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Overview  The pressure filler was built in 2013 by the German manufacturer KHS. The pressure filler is still in use at a large German brewery and can be inspected at any time.  Technical data  Capacity: 22,000 - 65,000 bph  Number of filling stations: 168 Number of capping stations: 24  Pitch circle filler: 5040 mm Scope of delivery  Valve node Vacuum unit Hygienic inlet Fill level and closure inspection Rejection and rejection belt Technical documentation Incl. program backup Extensive transporters available, which can be purchased additionally

Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and ope ...

Overview  This cold glue labelling machine was manufactured in 2004 by German company KHS. The machine was running until January 2025 and is now stored in the company. The labeller has a camera system for the orientation of the labels in the neck area for swing-top glass bottles. Technical data  Capacity: Up to 26,000 bottles per hour Working direction: anticlockwise Formats: 330 ml Longneck glass bottles 330 ml Steinie glass bottles 330 ml Swing-top glass bottles 500 ml NRW glass bottles Label positions: Front (up to 2 labels) Back (up to 1 label) With a Siemens S7 control New HMI touch panel in 2019

Technical Specifications & Performance Data The KHS Innofill-ER VF 143/20 is a high-speed used isobaric filling monoblock designed for premium glass bottle applications in beverage production. Engineered for reliability in industrial packaging environments, it offers consistent performance for soft drinks, sparkling water, and still water on a used bottling line. Manufacturer: KHS Model: Innofill-ER VF 143/20 Category: Filling Monoblock (Isobaric) Year of manufacture: 1994 Rated speed: up to 45,000 bottles per hour (format- and product-dependent) Filler configuration: 143 isobaric filling valves (rotary) Capper: 20-head Alcoa ROPP, 20 mm (rotary) Container types: Glass bottles Bottle formats: 0.70 L, 0.75 L Product types: Soft drinks, water (sparkling), water (still) Electrical: 50 Hz Condition: In storage Documentation & safety: Manuals available; safety features included Advanced Autom ...

11082026 KHS Innopack Kisters SP High Speed Shrink Packer - 2017 This excellent condition KHS Innopack Kisters SP A-M high-speed automatic shrink packing machine was manufactured by KHS in 2017. It is designed for the efficient secondary packaging of beverage cans and bottles into retail-ready multipacks using shrink film. The machine has operated in less than 10,000 hours, maintained by the book and this in very good condition. Operation was stopped in the end of 2026. It has previously been used for packing beer and cider in 330 ml and 500 ml aluminium cans in package formats of 6 × 330 ml, 12 × 330 ml and 6 × 500 ml, but it can be easily configured into various other formats. It has an operating speed of up to approximately 80 tacts per minute and a total line production capacity of up to approximately 42,000 cans per hour, depending on container type and packaging format.  ...

Overview KHS Innofill NRF filling and closing monoblock for still wine in glass bottles, built in 2007. A 50-valve filler is followed by two 10-head closers: a KHS natural-cork closer with vacuum device and an aluminium roll-on capper by Zalkin, so the machine closes either corks or screw caps. Output 12,000 bottles per hour. The operator panel and software were updated by KHS in 2022. Technical data Manufacturer: KHS Model: Innofill NRF Year of manufacture: 2007 Output: 12,000 bottles/h Filler: 50 filling valves, pitch circle 1,800 mm, filling tube diameter 20 mm Cork closer: KHS, 10 heads, pitch circle 360 mm, electrically heated cork jaws, cork sorter mounted on top Vacuum device with vacuum pump Screw-cap closer: Zalkin aluminium roll-on capper, 10 heads, pitch circle 360 mm, for 31.4 x 24.2 mm aluminium caps Machine pitch 36π, running direction left to right Conveyor: stainless ste ...