222 MAZAK used machine for sale

Key data: 660 mm, 1500 mm

X-axis 580 mm Y-axis 150 mm Z-axis 1,545 mm B-axis -30 to 210° W-axis 1,490 mm Main spindle Drive power 22 kW Max. spindle speed 4,600 rpm Max. bar passage 52 mm Sub-spindle Drive power 18.5 kW Max. spindle speed 5,000 rpm Milling spindle Drive power 18.5 kW Max. spindle speed 12,000 rpm B-axis 0.0001° Interface for bar feeder Parts catcher Chip conveyor 50 bar high pressure pump 5-axis simultaneous machining Full C-axis bending spindle Gear Hobbing, Abwalfräsem Milling spindle synchronized threading Cylinder interpolation Preparation for multiple and flash tool holders 1 pcs LNS Quick Load Servo 3 Short Bar Loader

Key data: 380 mm, 1000 mm

Main spindle Drive power 26 kW Max. spindle speed 4000 rpm Max. bar passage 77 mm Spindle nose A2-8 Revovler Drive power milling drive 5.5 kW Max. speed driven tools 4500 rpm Tool stations 12 Mazatrol Matrix Control Main spindle with full C-axis Tooleye Tool Measurement Chip Conveyor, Right Discharge Coolant pump 15 bar Interface for bar feeder Parts catcher Tailstock 3-jaw chuck B-210 Tool holder package: 7 fixed + 3 driven tool holders CE mark Documentation

Key data: 380 mm, 1019 mm

X-axis 234 mm Y-axis 100 mm Z-axis 1090 mm Tailstock 1075 mm C-axis 360° Drive power 26 kW Max. bar passage 80 mm Max. speed 4000 rpm Number of tool positions 12 Drive power milling drive 5.5 kW Max. spindle speed 5000 rpm Powered tool stations 12

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

Key data: 1740 mm, 760 mm, 660 mm

Mazatrol PC Fusion CNC 640 M Control 30-fold tool changer SK-40 Tool holder according to DIN 69871 Automatic tool length measurement Cooling by the spindle Chip Conveyor, Right Discharge Detachable handwheel Rapid traverses X/Y/Z: 36 m/min CE mark

Key data: 3000 mm, 820 mm, 720 mm

48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining

malfunctioning control unit

The machine is in good technical condition; it can be tested by prior arrangement.

Key data: 660 mm, 1495 mm

Mazak Integrex 200-lV ST CNC turning-milling center with second spindle CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Spindle speed 35 - 5000 rpm Spindle speed sub spindle 35 - 5000 rpm Milling head speed 15 - 21,500 rpm X-axis travel 580 mm Y-axis travel 160 mm Travel of the Z-axis 1,545 mm Travel of the B-axis 225 ° C-axis indexing 0.0001° (360°) Tool Taper Capto C6 Number of tools in the magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 560 mm, 510 mm, 510 mm

Inv. Num. : 9279 Type: HTC 400 Producer: MAZAK Created: 1998 Parameters: Control System: Mazatrol Work table length: 400 mm Work table width: 400 mm Maximum table load (even): 300 kg Spindle drive power: 5.5 kW Maximum spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Number of stacking positions: 24 pieces

Key data: 730 mm, 450 mm, 470 mm

Mazak CV5-500 CNC 5-Axis Vertical Machining Center CNC control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Maximum 500x320 mm workpiece X-axis travel 730 mm Y-axis travel 450 mm Travel Z-axis 470 mm C-axis (table rotation) 360° B-axis movement ±110 (220) ° Spindle speed: 18,000 rpm Spindle holder HSK A-63 Spindle motor 15/11 kW Magazine capacity 48 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 730 mm, 850 mm, 560 mm

5-axis Vertical Machining Centre CNC Control Mazatrol Fusion 640 M 5x Table size 500x500 mm Table load 500 kg Number of pallets 12 (PMC) Max workpiece Ø 730x500 mm Movement X/Y/Z-axis 730-850-560 mm C-axis (table rotation) 360° A-axis (table tilt) +30/-120 Spindle speed 35-10,000 1/min Spindle Taper Big Plus BT50 Spindle motor 30/22 kW Magazine capacity 120 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

The machine is in good technical condition, after prior agreement it is possible to test it. Matrix NEXUS 2- control system Pallets 2x YES. Chip conveyor Yes ATC- YES High pressure 70 Bar Spindle 10 125 hours •Total machine start-up 32 348 hours Pallet 630 × 630 mm Number of pallets 2 Max. workpiece size Ø 1050 × 1300 mm Max. pallet load 1500 kg X travel 1050 mm Y travel 900 mm Z travel 980 mm 4th axis Yes (NC rotary table) Spindle taper BT50 / CAT50 Spindle speed 8000 rpm (standard) Optional speed 10,000 rpm Spindle power approx. 37 kW Tool magazine 40–120 positions Control system Mazatrol Matrix Nexus 2 Production type Production series machining Typical applications Cabinets, cast iron, steel, automotive Machine weight approx. 20–22 t Automatic pallet change Yes

MAZAK MTV 414 CNC vertical machining center was built in 1992 in the United Kingdom by YAMAZAKI MACHINERY UK LTD. The offered machine is an excellent choice for machining workpieces with a maximum weight of 500 kg. Thanks to its reliable components and extremely rigid design, the MAZAK MTV 414 guarantees the best machining results throughout its service life. The machining process is performed inside a large work area with a work table with a length of 900 mm and a width of 410 mm, a spindle and a capacious tool magazine. The spindle, driven by a powerful motor, rotates at a maximum speed of 7000 rpm and operates in three X,Y,Z axes with feeds of 560 mm, 410 mm and 460 mm respectively. All cutting tools are stored in a 24-position tool magazine with an automatic tool changing system (ATC). All this is complemented by the intelligent MAZATROL M32B CNC controller with its intuitive interfa ...

Key data: 1875 mm, 1550 mm, 1345 mm

CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

The machine is in good technical condition, after prior agreement it is possible to test it. ideal machine for complete machining in one clamping (turning + milling). Equipment and parameters: - main spindle + counter spindle (complete machining from both sides) milling spindle with B axis Mazatrol SmoothG control 36-position tool magazine Capto C6 / PSC63 internal cooling large number of accessories (jaws, clamps, holders, etc.) a functional postprocessor for SolidCAM is included in the sale significant time and cost savings when introducing the machine into production

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg

Lathe Mazak QT10B 1997

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. Operating hours: 12,041h Parameters: Control system: MAZATROL MATRIX NEXUS Worktable length: 1300 mm Worktable width: 530 mm Spindle drive power: 11 kW Speed: 12,000 1/min X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Taper: ISO 40 Number of positions in the magazine: 30 pcs Machine weight: 7100 kg

Key data: 630 mm, 1100 mm, 600 mm

Clamping area: Ø700 x 500 mm Rapid traverse X/Y/Z: 60/60/56 m/min Milling spindle Max. spindle speed: 18,000 rpm SK-40 Other equipment Air on the workpiece Cooling by the spindle, 70 bar Renishaw RMP 600 Probe F) Tool tip control 5-axis simultaneous machining Tool radius compensation – 5-axis simultaneous Drilling cycle with torque-dependent chip breaking G00 slope constant Synch. Threading Cylinder interpolation EIA Dynamic Compensation 2 (included 1) KNOLL Coolant System KF200/1250 Paper Belt Filter 70 bar high-pressure pumoe KNOLL Chip Conveyor 640-S-1

Key data: 380 mm, 1000 mm, 4000 1/min

Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg

The machine is in good technical condition, testing is possible by prior arrangement.

Stock number: 4001 PROCESSING Manufacturer: MAZAK, Type: VCN 410A-II Year of Make: 2009 Specifications: Table size 900 x 410 mm Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 510 mm CAT 40 spindle cone Infinitely variable spindle speeds 12000 rpm Spindle motor 11/7.5 Kw Tool changer 30 places Control Mazak Matrix Fabr. Controlled in axes 3 Operating hours spindle 7746 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Tool Measuring Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG

Stock number: 4000 PROCESSING Manufacturer: MAZAK, Type: VCN 510 C Year of Make: 2006 Specifications: Table size 1350 x 550 mm Large table load 1000 kg Longitudinal movement (X) 1050 mm Transverse movement (Y) 510 mm Vertical movement (Z) 510 mm Spindle cone MAS 40 Infinitely variable spindle speeds 12000 rpm Tool changer 30 places Control Fusion 640 Fabr. Operating hours spindle 7419 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Length: 2800 mm, Height: 2800 mm, Width: 2900 mm, Weight: 7100 kg

Table size 2240x810 mm Max loading capacity 3000kg Spindle speed 6000 rpm Number of tools in magazine 60 With tool measurement unit All axes with linear scale

Inv. Num. : 8714 Type: SQT 100 Producer: MAZAK Created: 2002 Parameters: Maximum turning length: 305 mm Maximum turning diameter: 280 mm Maximum spindle speed: 6000 1/min Spindle bore: 52 mm Weight: 3600 kg Equipment: Conveyor Bar Feeder

Mazak Integrex 200 Y, 20 tool positions, x,y,z = 530,140,1065. 30 kW spindle motor, 35-4500 rpm, chuck size 210 mm, through-hole diameter 61 mm, under power

Mazak NTX 48 Turbo CO 2 Laser cheap MAZAK laser cutting machine NTX48 1.5kW Year of Make: 1998 well-preserved, overhauled MAZAK laser machine with 1500W Panel size: 2500mm x 1250mm Minimum installation area of 2.6m x 6m Completely encapsulated machine cover FE: up to 15mm VA: up to 6mm Plastic possible Wood possible incl. software incl. suction Machine was completely overhauled by Mazak 1,000 hours ago (lenses, mirrors, oils). Includes Acer Laptap with software Si Cam including dongle Video on request To be visited under power

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.