156 OKUMA used machine for sale

Key data: 762 mm, 460 mm, 460 mm

5-Axis CNC Vertical Machining Center Okuma MU-400VA Year of construction 2009 OSP P200M CNC Control 2-axis NC swivel rotary table Table clamping - Ø 400 mm Table load max. 300 kg C-axis 360° A-axis +20°/-110° X 762 mm Y 460 mm Z 460 mm Spindle drive power 22 kW Spindle speeds max. 15,000 rpm. Tool holder HSK-A63 32 tool magazine slots Tool diameter max. 90 / 125 mm To be visited under power. Offer number MV-6440

Table dimensions 1000 x 460 mm X Travel 762 mm Y travel 460 mm Z travel 460 mm Table load 700 kg Chip conveyor Weight 6500 kg Dimensions LxWxH = 2750 x 2160 x 2715 mm Spindle clearance: 0.05 - 0.10 mm Repair: approx. 9,000 € New: 12.000 €

Swing Over Bed .. 20.87" Swing Over Saddle ... 16.14" Distance Between Centers 39.37" Max Turning Diameter 13.39" Max Working Length .. 39.37 Axis Travel: XA10.24" ZA40.00" XB 5.51" ZB38.00" C Axis .. 360 Degree Spindle Speeds .. 38 ~ 3,800 RPM Speed Ranges Infinitely Variable X Auto Range Nose . Option A2-8 Big Bore Bore Diameter ... 3.14" Turret Upper Multitasking ... V-12 NC Turret Lower ... V8 (VDI) Indexing Time Non-Lift .. 0.18 Sec Live Tool Speeds 45 ~ 4,500 RPM Feedrates X/Z/C . 787/984/200 Tailstock Quill Diameter 3.54" Quill Bore Taper MT#5 Quill Travel 4.72" Main Drive Motor ... 30-HP 304 Ft-LB Torque Live Tool Motor . 9.5 HP Machine Weight .. 19,360 LBS Equipped With: Okuma OSP-200LA With Machining Navi L-G Spare M-Codes, 4-Sets Pitch Error Compensation Feed Hold During Threading Thread Start Point Offset Helical Cutting Spindle Syn ...

CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories

CNC lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of Make: 2021 Max. machining Ø: 390 mm Swing Ø over cross slide: 260 mm Max. turning length: 500 mm Travels: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 seats – all powered Speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyors - Touchsetter - one Touch IGF - Parts catcher - Reinforced coolant device 8bar - Suction

CNC milling turning center OKUMA Multus B400 TECHNICAL FEATURES: Year: 2007 NC Type: OSP-P200L Distance between points: 1500 [mm] Maximum diameter Turning time: 710 [mm] Permissible diameter above the carriage: 710 [mm] X-axis travel: 690 [mm] Y-axis travel: -115 / +115 [mm] Z-axis travel: 1545 [mm] W-axis stroke: 1550 [mm] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Coolant milling spindle: HSK-A63 Tool magazine capacity: 40 Maximum length Tool Size: 300 [mm] Maximum diameter Tool No.:130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 4000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 12000 [mm/min] Spindle Nose: JIS A2-8 Minimum speed. Spindle: 38 [rpm]  ...

Key data: 250 mm, 500 mm, 3800 1/min

The machine is in good condition and fully functional. It can currently be visited under power. Included is the hydraulic three-jaw chuck, furthermore it has a hydraulic tailstock which is movable. The machine does not have a chip conveyor, but it does have a chip tray.

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

Okuma Macturn 30 1SW 1000, BJ 1999, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 Bar, gear milling option, approx. 12500 spindle hours, HS Big Bore, GS Standard Bore, good condition In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, we expressly reserve the right to make errors and prior sales. The sale is made under exclusion of any warranty claims. The goods remain the prop ...

Okuma Multus B300-W 6 Axis Lathe-Milling Machine Ffebm Noyg Rf Njrbw Tju -Okuma OSP P200L -BJ 2008 -Cutting Time 10,500 h -H1 milling spindle 6000 rpm -Main spindle 3800 rpm, Rota NC 315-86 -Sub-spindle 5000 rpm -ATC 60 System HSKA-63 (60 Tools) -Geometry very good -Marpos Tool Sensor Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, a visit to our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, w ...

CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208

CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock

Horizontal machining center Okuma MB 500H with 2-fold pallet changer Year of Make: 2005 Control: Okuma OSP E100M Technical data: Spindle speed: 10 - 15,000 min-1 Drive power: 26 KW Tool holder: BT 40 Number of magazine slots: 60 IKZ: 70 bar Routes: X-axis: 800mm Y-axis: 800mm Z-axis: 800mm 4th axis: index 1° Number of pallets: 2 Pallet size: 500x500mm Accessories: - Coolant system type ConSep 2000 from Mayfran - Chip conveyor Mayfran type ConSep from Mayfran - Tool breakage monitoring in the magazine - Workpiece coolant shower

CNC lathe Okuma LB 300- M Control: OSP-U100L Year of Make: 2000 Turning length: 1,000 mm Turning diameter: 430 mm Speed: 4,200 rpm Tool turret: 12 places (driven) Recording: VDI 40 Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck Tailstock Parts catcher Samsys 3000 Short Bar Loader (optional)

Vertical CNC Lathe Manufacturer: Okuma Type LVT300-M Year of manufacture 2005 Control OSP-E100L Turning diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C (pitch): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in the turret: 12 Length of the feed belt: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 Weight: 6,500 kg EQUIPMENT Turret can accommodate powered tools Feed belt 17 pallets There are still various steel holders and AGW s to purchase, these are not included in the scope of delivery. For more information, I am always available at 01778957069. Machine is in a used very good condition, no maintenance backlog, geometrically TOP

CNC lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of Make: 2013 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: VDI 40 Equipment: - Chip conveyors - Touchsetter - OneTouch IGF - NC tailstock - 3-Jaw Power Chuck Forkardt 3QLC/K250

CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Travels: Turning length: 900 mm Turning diameter max. 630 mm X-axis 580 mm Y-axis 160 mm (+80/-80 mm) Z-axis 935 mm B-axis 225° (-30° / +195°; 0.001° steps) C-axis 360° Mount: HSK-A 63 Total tool stations: 40 locations Spindle speed: 50 – 5,000 rpm Accessories: - Chip conveyors - Tailstock design NC-controlled, MT5 - Touchsetter - High-pressure pump IKZ 40 bar - Renishaw touch probe prepared - 3-jaw chuck Kitagawa B212 Ø304 mm

Control OSP 700M Travel X/Y/Z: 1050 x 560 x 450 mm Table size 1300 x 560 mm Spindle speed 6,000 min-1 Tool magazine for 20 Wkz., BT 50 Chip conveyor Approx. 40 BT 50 tool holders

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

Key data: 340 mm, 1000 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...

Control: OSP-P300 Max. turning length: 950 mm Max. turning diameter: 340 mm max. turning Ø over slide: 380 mm max. turning Ø over bed: 580 mm Max. speed: 4,200 rpm Tool holder: BMT 2 Tool Turrets A-turret: 12 tool positions (all driven) B-turret: 8 tool positions Tailstock Conveyor Hydraulic Power Chuck B210/A8 Touchsetter High Pressure Coolant Pump Enlarged water tank

Key data: 650 mm, 1500 mm

Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...

Key data: 762 mm, 460 mm, 460 mm

Vertical machining center Okuma MB-46UAE Year of Make: 2004 Control OSP U100M Machinery ▪ Spindle – speed 8000 rpm. ▪ High-speed machining (Hi-Cut) ▪ Spindle load monitor (load monitoring) ▪ Thread milling (Herical-Cut) ▪ Workpiece zero points 50 pieces ▪ 200 Tool Corrections ▪ Manuals available (documentation) ▪ Tool changer with 32 positions ▪ Internal coolant supply Technical details ▪ Travel X-axis (column right-left): 762 mm ▪ Travel Z-axis: (table forward-backward): 460 mm ▪ Y-axis travel (spindle up-down): 460 mm ▪ Distance table surface to spindle nose: 150~610 mm Table ▪ Table size: 1000 x 460 mm ▪ Distance from the floor to the table surface: 800 mm ▪ Max. load capacity: 700 kg Spindle ▪ Spindle speed: 8,000 rpm ▪ Number of gears: infinitely variable ▪ Front bearing diameter: 70 mm ▪ Spindle: 11/7.5 kW � ...