156 OKUMA used machine for sale

Key data: 370 mm, 600 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LU300-2ST Year of Make: 2005 Control: OSP-E100L Delivery time: in stock Machinery  Parts conveyor belt and parts collection tray – workpiece chute with removal conveyor belt incl. electrical kit  2 disc turret with VDI40 (12 + 8 stations)  Power clamping cylinder for hollow chips – Hole in the drawbar 52mm  Extension Kit "D" – Kit one touch IGF-D  Open/close chuck while the spindle is running via M-Code  Reinforced coolant pump 8 bar  Coolant on A and B turrets can be switched via M function  Interface for connecting rod feed  Chip conveyor Technical details  Swing diameter over bed: 530mm  Swing diameter over slide: 380mm  Distance between the tips: 600mm  Max. turning diameter: 370mm  Max. turning length: 600mm  Travel X-axis: upper 260mm  ...

Key data: 420 mm, 650 mm

Machine Type: CNC Lathe Manufacturer: Okuma Type: LB400M-1SC Year of Make: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14502 hrs Delivery time: in stock Machinery - Interior extraction from Hengst Filtration (built in 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, also available through the tool - Dialogue programming IGF - Chip conveyor (scraper) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Travel Z-axis: 675 mm - Travel C-axis: 360° - Chuck passage: 72 mm - Spindle passage: 95 mm - Clamping cylinder passage: 95 mm - Tool holder: VDI 40 - Tool stations: Stations 12 - Spindle speed: 2800 rpm - Main spindle power: 22/30 kW - M-spindle ...

Key data: 350 mm, 300 mm

Control: Okuma OSP-E100L Travel: X approx. 350 mm. Z: approx. 300 mm, maximum rotary diameter: 400 mm Item No.: 110174 Year of Make: 2004 Equipment: Conveyor Ewag infeed belt -20 positions

Key data: 250 mm, 500 mm

Item no.: 0727 Year of Make: 1995 Equipment: Bar Feeder Sameca Chuck + Collet Chuck Various tool holders Remark: Electronics defective

Key data: 1050 mm, 560 mm, 460 mm

incl. Robojob Mill-Assist Manufacturer: Okuma Type: Genos M 560-V-e Travels: X: 1050 mm, Y: 560 mm, Z: 460 mm Table size 1300 x 560 mm Maximum table load: 900 kg Tool Stations 32 Control: Okuma OSP-P 300Ma-e (NC-controlled) Serial number: 0712-101084 Year of manufacture: 2018 Accessories: Chip conveyor High pressure pump 15 bar, Internal cooling pneum. Peeping tom loading door, Automation: Robojob Mill-Assist Essential Robot interface Length probe Renischaw

Key data: 1050 mm, 560 mm, 460 mm

Table size 1300 x 560 mm Tool Stations 32 Control: Okuma OSP-P 20 M Serial Number: 155968 Year of manufacture: 2011, retrofitted 2022 Accessories: Chip conveyor 4th axis, 0-point clamping plate 1 hinged quill

Control: OSP-300LA Year of Make: 2019 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Conveyor One touch IGF Touchsetter 2x 3-jaw chuck Sub-spindle Coolant Plant HMF-980 Suction

Key data: 3000 mm, 2000 mm, 1150 mm

X-axis: 3,000 mm Y-axis: 2,000 mm Z-axis: 1,150 mm Table dimensions: 2,800 x 1,500 mm Spindle mount: ISO 50 Spindle speed: 30 - 6,000 rpm Tool changer: 50 places CNC Control: OSP7000M Stand spacing: 2,050 mm Equipped with: - Angle milling head - Touch probe button - Double chip conveyors (recently renewed) - Cooling plant (recently renewed) -Operating instructions Country of origin: Japan Machine LxWxH: 9,000 x 3,500 x 3,500 mm +/- Machine weight: 27,500 kg

Key data: 320 mm, 500 mm, 3800 1/min

OKUMA Genos L 3000-e / 2021 Circumferential diameter max. 390 mm Turning diameter 300 mm Turning length 500 mm X - Axis 235 mm Z - axis 520 mm Y - Axis 100 (+50 / -50) mm C - Axis 360 / 0.001 ° Main spindle: Bar passage 70 (80) mm Speed range 38 - 3800 rpm Spindle motor 22 KW Torque 412 Nm Sub-spindle: Bar Passage 43 (53) mm Speed range 6000 rpm Spindle motor 7.5 KW Torque 47.7 Nm Tool turret: Number of applicants WZ im Revolver 12 Speed range 45 - 6000 rpm Drive 5.5 KW Torque 31.3 Nm Machine weight approx. 5500 kg CNC OKUMA OSP P300LA-e Electr. Handwheel Software: Automatic main spindle interpolation Software: Screw Line Interpolation Software: Eccentric milling Software: Tool height correction in Y-axis Software: Synchronized tapping with applied tapping Tools Software: ADVANCED ONE-TOUCH-IGF with autom. Work plan creation OSP-P300LA-e TE ...

Control: OSP-P 200M X-axis: 1,500 mm Y-axis: 660 mm Z-axis: 660 mm Tool holder: SK 40 MASBT Tool magazine: 32-fold Speed: 8000 rpm Equipment - ONE touch IGF - Hinged belt conveyor - Electronic handwheel - Internal coolant supply 20 bar

Key data: 650 mm, 1500 mm

Manufacturer : Okuma Multus U 4000 1 SC 1500 Big Bore Control : OSP P 300 S with 3D-M-E kit; IGF Advance M-E kit Year of construction : 07/ 2014 Switch-on hours : approx. 19500 h Spindle hours : approx. 12500 h Availability : direct from location Specifications Turning Ø over bed: 650 mm Distance between tips: 1,500 mm Maximum turning diameter: Ø 650 mm Maximum rotatable length: 1,500 mm Rod passage (main spindle): Ø 112 mm ( Pull tube 90 mm ) Spindle Nose (Type): JIS A2-11 Spindle speed: 45 - 3000 rpm Motor: 30/22 kW (30 min/cont) Max. torque : 955 Nm X-axis: 695 mm Z-axis: 1,600 mm Y-axis: 300 [± 150] mm B-axis: -30° to +210° (0.001° ) as full NC axis C-axis: 360° (0.0001° increment) Milling spindle: Tool holder : Capto C 6 Number of tools: 80 positions Spindle speed: 50 - 12,000 rpm Engine: 22/11 kW Dimensions and weights: F ...

Inv. Num. : 8708 Type: GENOS L3000-e Producer: OKUMA Created: 2021 Parameters: Switch-on hours: 7963 h Hours: 4206 h Maximum turning length: 500 mm Max. turning diameter: 300 mm Maximum main spindle power: 22 kW Maximum spindle speed: 3800 1/min Number of all tools: 12 pieces Weight: 7700 kg Equipment: C-axis Y-axis CNC tailstock Tool probe Powered tools VDI Holder Powered Tool Holders (5 pieces)

Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg

OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold

OKUMA MX55 Control: OSP700M Machine hours (spindle running time): 26,889 Accessories: various tool holder BT50; 4. Axis Partial Attachment

Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system

The machine is in good technical condition, a test run is possible by prior arrangement. OKUMA 5-axis vertical machining center MU-400VII with OSP-P300M-H – Tool magazine for 48 tools, BT40 (or Big Plus) – Tool breakage detection incl. automatic length measurement – Preparation for the function of automatic zero point shift (incl. software) – Collision avoidance system for 4-/5-axis milling centers – Coolant pump 0.8 kW instead of the standard version 0.25 kW – Flush cooling – Function for automatic zero point displacement incl. workpiece measurement, Renishaw OMP60 probe – Cutting edge control for 5-axis machining – Super NURBS Type A for 5-axis centers –Conveyor

"The machine is in good technical condition, a test run is possible by prior arrangement."

Control Okuma OSP-P300 SA Rotary diameter. [mm] 650 Turning length [mm] 1000 Main spindle: Motor spindle technology Speed 4,200 rpm Power 22 kW Torque 427 Nm Spindle bore 91 mm Hollow clamping cylinder 86 mm C-Axis High Accuracy Package Chuck SMW KNCS-N 275-86 K8 Sub-spindle: Motor spindle technology Speed 5,000 rpm Power 22 kW Torque 420 Nm Spindle bore 80 mm Hollow clamping cylinder 77 mm C-Axis High Accuracy Package Chuck SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Milling spindle technology Speed 12,000 rpm Power 22 kW Torque 120 Nm Tool holder HSK 63 Y-axis 250 mm (+/- 125 mm) B-axis 240° Tool magazine: Number of stations 80 Equipment / Accessories: Displacement measuring systems directly in X/Y/Z axis (glass scales) Chip disposal chip conveyor Coolant supply IKZ system, 70 bar Coolant temperature control Deltatherm E4 Chip flushing work area ...

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package

Inv. Num. : 8264 Type: MA-400HA Producer: OKUMA Created: 2008 Parameters: Work table length: 400 mm Work table width: 400 mm Maximum spindle speed: 8000 1/min X-axis travel: 560 mm Y-axis travel: 610 mm Z-axis travel: 625 mm

Control: OSP-P200L max. turning diameter 550 mm max. turning length 600 mm Hollow spindle passage: 90 mm Spindle speed 3,200 rpm Main spindle: 30 kW A-turret: 12 seats (all driven) B-turret: 10 seats Tool holder: VDI 50 Accessories Schunk Chuck NC Rota 500 Chip conveyor Interlit Tailstock towable incl. external coolant system Door automation Touch Setter

OKUMA MX 45 VAE ::TECHNICAL SPECIFICATIONS::: CNC Model: Okuma OSP CNC Version: OSP 700 M Tool holder: BT 40 Spindle power: 11KwKw Number of spindle speeds: 7000 Number of tools: 30 X-axis travel: 762mm Y-axis travel: 460mm Z-axis travel: 450mm Fast feeds linear axes X Y Z: 30 30 24m/min Table dimensions: 1000x460mm Guides: roller High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt Presetting: yes Machine equipment: Renishaw probe :::D DIMENSIONS AND WEIGHT::: Length: 4000mm Width: 3000mm Height: 3000mm Weight: 5000Kg

Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck

Key data: 1000 mm, 950 mm, 1000 mm

Okuma MA-600 HB Space Centre Control OSP E 100M Pallet dimensions 630 x 630 mm Number of pallets 2x X-axis travel 1000 mm Y-axis travel: 950 mm Travel of the Z-axis 1000 mm Indexation of Table 1° Spindle holder MAS BT 50 Spindle speed 12,000 rpm Spindle motor 37/26 kW Positions in Tool Magazine 60 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC lathe Okuma LU 3000 M2SC 1000 / Demonstration machine Control: OSP-P300LA Spindle hours: 50 h Turning length: 1,000 mm Turning diameter: 340 mm Speed: 5 - 5,000 rpm Tool: VDI 40 2 Tool Turrets A-turret: 12 tool positions / all positions driven B-turret: 8 tool positions Tailstock Conveyor 3-jaw chuck Kitagawa B210 Touchsetter One Touch IGF Handwheel on the control panel