22 OKUMA cnc turning centers used machines

OKUMA MULTUS U4000 1SW 1500 Mfg. Year 2016, Installed 2018 OSP P300S control Movements: X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,600 mm W-axis: 1,554 mm B-axis: -30° to +210° max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Big Bore sub spindlel 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Milling spindle 22 kW, max. speed: 12,000 rpm Full B-axis Tool magazine for 80 tools High accuracy option C-axis on main and sub spindle Hydraulic steady rest, SMW Autoblok K4 - Clamping range: 30-245 mm Preparation for Multitool Renishaw System, RMP60 probe Renishaw TRS2 Tool Breakage detection swarf conveyor Mayfran MT10 20 bar high pressure pump API Library 2 One-Touch IGF Advance M-D Kit Helical turning function Z-axis automatic zero point offset by touch sensor main and sub spindle C-axis automatic zero offs ...

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

turning diameter: 1050 mm turning length: 3000 mm control: OSP 300 SA-H travel -x axis: 1080 mm travel -z axis: 3215 mm travel -y axis: -330 +330 mm b-axis: -30 ~210 - 0,001 ° spindle turning speed range: 14 - 1500 U/min spindle hollow: 185 mm power capacity - milling spindle: 37 / 22 / 15 kW Spindle drive motor main spindle: 45 / 37 kW rapid travel x/y/z: 40 / 40 / 30 mm/min C-axis turning speed: 100 U/min max. tool length: 600 mm max. tool diameter: 135 / 300 mm max. tool weight: 30 kg total power requirement: 81,3 kVA weight of the machine ca.: 43 to dimensions of the machine ca.: 9,75x3,55x3,61 m Equipment: - CNC control Okuma OSP P 300 SA-H - NC tailstock - Milling spindle 40 - 10,000 rpm, 37/22/15 kW - Touch setter - Coolant through the spindle - Chip conveyor - Hydraulic steady rest SMW K6.1 (215 - 510 mm) - 3-jaw chuck 15’ approx. 16920h switch-on hours and 9633h automatic ope ...

Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system

Key data: 650 mm, 1500 mm

Manufacturer : Okuma Multus U 4000 1 SC 1500 Big Bore Control : OSP P 300 S with 3D-M-E kit; IGF Advance M-E kit Year of construction : 07/ 2014 Switch-on hours : approx. 19500 h Spindle hours : approx. 12500 h Availability : direct from location Specifications Turning Ø over bed: 650 mm Distance between tips: 1,500 mm Maximum turning diameter: Ø 650 mm Maximum rotatable length: 1,500 mm Rod passage (main spindle): Ø 112 mm ( Pull tube 90 mm ) Spindle Nose (Type): JIS A2-11 Spindle speed: 45 - 3000 rpm Motor: 30/22 kW (30 min/cont) Max. torque : 955 Nm X-axis: 695 mm Z-axis: 1,600 mm Y-axis: 300 [± 150] mm B-axis: -30° to +210° (0.001° ) as full NC axis C-axis: 360° (0.0001° increment) Milling spindle: Tool holder : Capto C 6 Number of tools: 80 positions Spindle speed: 50 - 12,000 rpm Engine: 22/11 kW Dimensions and weights: F ...

Key data: 650 mm, 1500 mm

Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...

CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Travels: Turning length: 900 mm Turning diameter max. 630 mm X-axis 580 mm Y-axis 160 mm (+80/-80 mm) Z-axis 935 mm B-axis 225° (-30° / +195°; 0.001° steps) C-axis 360° Mount: HSK-A 63 Total tool stations: 40 locations Spindle speed: 50 – 5,000 rpm Accessories: - Chip conveyors - Tailstock design NC-controlled, MT5 - Touchsetter - High-pressure pump IKZ 40 bar - Renishaw touch probe prepared - 3-jaw chuck Kitagawa B212 Ø304 mm

Okuma Multus B300-W 6 Axis Lathe-Milling Machine Ffebm Noyg Rf Njrbw Tju -Okuma OSP P200L -BJ 2008 -Cutting Time 10,500 h -H1 milling spindle 6000 rpm -Main spindle 3800 rpm, Rota NC 315-86 -Sub-spindle 5000 rpm -ATC 60 System HSKA-63 (60 Tools) -Geometry very good -Marpos Tool Sensor Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, a visit to our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, w ...

Okuma Macturn 30 1SW 1000, BJ 1999, OSP 7000M, chip conveyor, ATC 24 BT40, coolant pump 8 Bar, gear milling option, approx. 12500 spindle hours, HS Big Bore, GS Standard Bore, good condition In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage. Delivery: free loading truck 100% payment before loading upon invoicing. All information is non-binding, we expressly reserve the right to make errors and prior sales. The sale is made under exclusion of any warranty claims. The goods remain the prop ...

Datenblatt / Datasheet: Control: OSP P200-M Travels X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degree] 1; 360 degree incrementing Tool Changer 200 ATC MAS BT50 Tool slots: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet pool 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Further features: – Renishaw Sample – Renishaw Tool Break Control – Mayfran Concept with high-pressure pump In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both ele ...

CNC milling turning center OKUMA Multus B400 TECHNICAL FEATURES: Year: 2007 NC Type: OSP-P200L Distance between points: 1500 [mm] Maximum diameter Turning time: 710 [mm] Permissible diameter above the carriage: 710 [mm] X-axis travel: 690 [mm] Y-axis travel: -115 / +115 [mm] Z-axis travel: 1545 [mm] W-axis stroke: 1550 [mm] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Coolant milling spindle: HSK-A63 Tool magazine capacity: 40 Maximum length Tool Size: 300 [mm] Maximum diameter Tool No.:130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 4000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 12000 [mm/min] Spindle Nose: JIS A2-8 Minimum speed. Spindle: 38 [rpm]  ...

turning diameter: 340 mm turning length: 950 mm control: OSP P300L turning diameter over bed: 580 mm turning dia. over face-slide: 470 mm Workingspindle:: power capacity - main spindel: 22/15 kW turning speed range - main spindle: 45 - 5000 U/min spindle diameter: 120 mm spindle bore: 80 mm max. bar capacity: 72 mm spindle head: JIS A2-6 spindle cone: 82 x 2° Torque: 350 Nm travel -z axis: 1010 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min x - axis: travel -x axis: 260 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min y-axis: 120 mm total power requirement: 31,7 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,2 x 1,8 x 1,8 m â½ing and milling centre equipped with: - CNC control OSP P300L - NC tailstock - 12-position turret with driven tool station (BMT 60 ...

CNC Turning and Milling Center Okuma LT 2000 EX -MY 2pcs Control: OSP-P300L Year of Make: 2013 Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travels: W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) 2 tool turrets with 16 places each (all places driven) Equipment: - Chip conveyors - Paper belt filter system with high-pressure pump - 2x 3-jaw chuck Kitagawa - OGL gantry loader with approx. 5 kg load capacity - Stacking magazine 20 places - Touchsetter - Renishaw touch probe - Extraction system - Various accessories

The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10“ hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed ​​range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001?? increment Secondary spindle Speed ​​range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydrauli ...

CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package

Key data: 650 mm, 1500 mm

Double Spindle 5-Axis/7-Axis CNC Double Spindle Turning and Milling Center Okuma Multus U3000 1SW 1500 Year of construction 2021 OSP P300SA IGF-D CNC Controller Circumferential diameter over carriage 650 mm Turning diameter max. 1,500 mm Main spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Sub-spindle: Spindle bore 91 mm Spindle drive power 15/22 kW Spindle speeds max. 4,200 rpm. Chuck diameter 250 mm C-axis 0.0001° Tool support: Single tool carrier in the work area Tools for turning (L) and milling (M) CAPTO C6 Tool Holder Milling spindle drive power 19/25 kW Milling spindle speeds 50 – 12,000 rpm. Tool magazine and automatic tool changer 80 tool magazine positions Axes/travels: Flat path X 645 mm Perpendicular travel (off-center) 250 mm Longitudinal travel Z 1,600 m ...

CNC turning and milling center Okuma Multus B300II-W Control: OSP-P 300SA Year of Make: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis with stroke: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40-fold Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. pump 20 bar - Preparation for in-process measurement - Tool height correction in Y-axis for turning tools - Hi-Cut Pro high-speed control

OKUMA LB 300 M CNC turning center was built in 2006 in Japan by OKUMA Corporation. The machine, designed for even the most demanding production challenges, is an excellent choice for both unit and series production. Its extensive machining capabilities enable a wide range of complex operations, such as turning or threading, to be realised with the highest accuracy and repeatability. The workspace of the OKUMA LB 300 M machine has been fully maximised in relation to its compact dimensions in order to ensure complete freedom of operation. It features, among others, an inclined bed, a reliable spindle and a 12-position turret. The spindle, driven by a high-powered motor, reaches a maximum speed of 4500 rpm and moves in two X,Z axes with feeds of 260 mm and 520 mm respectively. All cutting tools are stored in a 12-position turret, which offers fast and reliable operation. Precise position ...

turning diameter: 430 mm turning length: 1500 mm control: OSP P300 turning diameter over bed: 670 mm turning dia. over face-slide: 480 mm Workingspindle:: power capacity - main spindel: 30/22 kW turning speed range - main spindle: 0 - 3000 U/min max. bar capacity: 95 mm spindle head: 11 JIS A-2 / ASA travel -z axis: 1500 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 30 m/min travel -x axis: 270 mm feed per revolution: 0,001 - 1.000 mm rapid traverse: 25 m/min C-Axis: 0,001 ° Rapids C - Axes: 200 min -1 rapid traverse: 12 m/min travel -y axis: 120 mm total power requirement: 29 kVA weight of the machine ca.: 8,6 t dimensions of the machine ca.: 4,3 x 2,25 m CCNC turning and milling center equipped with: - CNC control OKUMA OSP P300 - 12-fold Tool Revolver for driven tools - Tailstock - Chip conveyor - self-centering Chuck 315 mm Autoblock - 2 motorized radial modules - 2 axia ...

turning diameter: 420 mm turning length: 650 mm control: Okuma OSP-U100L spindle bore: 95 mm spindle turning speed range: 2800 U/min travel -x axis: 300 mm travel -z axis: 675 mm main drive motor: 22/30 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 2700 x 1900 x 1885 mm First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of Make: 2007 Internal machine no. 60 Travels: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360° W-axis: 1,550 mm Max. turning diameter: 710 mm Mount: HSK 63 Total tool stations: 40 locations Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyors - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper tape filter system 500l - One Touch IGF

turning diameter: 210 mm turning length: 700 mm control: Okuma OSP-E 100 L total power requirement: 35,7 kVA weight of the machine ca.: 7,1 t dimensions of the machine ca.: 2660 x 2000 x 2330* m CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360° x 0.001° Rapid traverse: 400 rpm Disc turret: 2 x ...

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold

Stock number: 3774 PROFILE BENDING MACHINE Manufacturer: KUMLA - ROUNDO, Type: Z-30 Machines NO.: 5017, Year of manufacture: 1990 Specifications: Shaft dia. 90 mm Round steel 60 mm Flat steel 200 x 30 Special roll mm Frame steel upright 100 x 20 mm Angle steel 90 x 90 x 9 mm Speed 7.5 m/min Upper roller 280 mm Ø Load by steel 40 Kg/mm2 16 cm3 Square steel 55 x 55 mm Total power 4 kW Hydraulic. 3-reels. Horizontal/Vertical Accessories: Digital Various matrices. Length: 1250 mm, Height: 1550 mm, Width: 1100 mm, Weight: 2100 kg