225 TETRA PAK used machine for sale

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.

Tetra Pak ® spare parts We can offer new or used Tetra Pak ® spare parts, -> We send you our list on request See list which we send on request to you

We offer: New Tetra Pak ® spare parts for TBA 8, PT 8, TBA 21, PT 21, TCBP 70, TCAP 21, 75 ... -> In the list that we send to you on request. you will usually find new spare parts for Tetra Pak ® machines such as TBA 8 PT 8 TBA 21 PT 21 TBA 19 (mainly volume flaps for TPA330SQ) TCBP 70 TCAP 47 (little) TCAP 21 (little) TCAP 75 (little) ... Intermediate sale reserved Prices on request

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak Cap Applicator 21, TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

TETRA PAK WRAP AROUND CARD BOARD PACKER, MODEL TCBP 70, MANUF. IN 2007, EXCELLENT CONDITION, VERSION 110, Z-FORM. 15000 RUNNING HOURS

1000 ml, 750 ml, 500 ml, 250 ml,

for 200, 250 and 330 ml

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

Tetra Pak TCAP/21 1000 ml sl ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 Applicator for 1000 ml slim line Tetra Pak beverage cartons, manufacturing year 2004 - in excellent condition - excellent serviced Available from stock Prior sales reserved

From the TBA/3 Jaw System: pre-assembled complete yoke left hand and yoke right hand with left hand arm, right hand arm etc. Condition: Unused/new Subject to being unsold

Spare part for Tetra Pak TBA/3 filling machine: From the TBA/3 Jaw System, pre-assembled, complete: yoke left hand and yoke right hand with left hand arm, right hand arm Condition: unused/new Intermediate sale reserved

Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...

Tetra Pak Aseptic Dosing unit F is a unique and innovative new technique where functional ingredients are injected with high precision into the base product after the final heat treatment, just before filling. Used for UHT applications, providesautomatic aseptic in-line dosing of ingredients. Ingredients that are suitable for aseptic dosing by the Tetra Pak Aseptic Dosing Unit F: dose sensitive ingredients like enzymes e.g. lactase, vitamins, minerals, Omega 3, probiotics, flavours, colours in everything from plain milk to formulated products. The system ensures the survival and stability of heat sensitive function that the charachteristics of the ingredients are not changed. It fits with any filling machine with a capacity between 1.000 - 20.000 l/hr with a continuous flow. The Tetra Pak Aseptic Dosing unit F is fully automated and installed between aseptic processing and the aseptic fi ...

The Tetra Pak TBA 9 is a type of filling machine designed for the aseptic packaging of liquid food products. Here are some key details:, - Type of Packaging: The TBA 9 is known for its ability to handle a variety of liquid products, such as juices, dairy, and sauces, using Tetra Paks carton systems., - Capacity: This filler typically has a capacity range suitable for small to medium production lines. It can fill various carton sizes, including the 200 ml format., - Aseptic Technology: The TBA 9 uses advanced aseptic technology to ensure that products are safely packaged without the need for preservatives, extending shelf life while maintaining product integrity., - Features:, - High efficiency and low waste during the filling process., - Flexibility to switch between different carton formats and sizes., - User-friendly interface for easy operation and monitoring., - Applications: Ideal f ...

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Tetra Pak automatic direct standardisation unit which is designed to handle skimming of whole milk and standardisation of cream or standardisation of both cream and milk. Skid mounted unit including PD340 Magnetic flow transmitter for standardised milk, PD340 Magnetic flow transmitter for cream remixing, PD340 Magnetic flow transmitter for standardised cream, density transmitters, valves, some interconnecting piping and a control panel with recorder of fat content, display for flowtransmitter and Alfa Laval Alfast Operator Panel. Previously used in combination with an Alfa Laval HMRPX 714 HGV-74C milk skimmer separator (20.000 liter per hour)., Additional features:, Some clamps for connection / piping are missing., Type of Machine: Standardisation unit for milk, Capacity: 20.000 ltr/h, Weight: ± 500 kg, Dimensions: ± 120 x 120 x 220 cm

Unused Tetra Pak Pressure Gauge, 0 - 10 bar / 0 - 1.0 MPa., Model: 233.50.100 LBM 990.22 1 1/2 Tri-clamp 10bar/MPa., Part No: 90522-0172., Type of Machine: Pressure Gauge

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Lower filling pipe, previously used on a Tetra Pak A3 Flex 250 ml Slim 100V., Type of Machine: Aseptic carton filling machine, Dimensions: 84 x 9 x 9 cm, Weight: 2 kg

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

Tetra Pak Capper 60 Cap applicator, previously used for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. This cap applicator was running in combination with a Tetra Pak TT/3 2000 carton filler. The applicator has a small footprint. Number of productions hours: 5.268 h. Applying caps quickly and accurately. The Tetra Pak Capper 60 uses a feeding screw and six torque- and speed-adjustable rotary capping heads to apply caps on stationary packages. Change package heights within the same bottom format in only five minutes. Control panel with Allen-Bradley CompactLogix L36ERM PLC and separate operation panel with Tetra Pak touch screen panel. The production capacity goes up to 4.500 packs per hour. Including collecting vat and elevator (Bonino, Auxiliary Feeder, code nr 56849, date 2018). Including all available manuals and all programs (language in program English and Swedish). Ca ...

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing Spec.: 3434618-0100, Weight: ± 325 kg

The Tetra Pak Tetra Straw Applicator (TSA 46) has a compact design and is very reliable. Trouble-free operation in a carton filling lines is guaranteed even with long periods of use. It is installed between the filling machine and the packaging machine and has servo motors and inverters. The regulated and controlled application of the straw is thus made possible without any problems. The constant and trouble-free speed of up to 8.000 units/h is ideal for use in conjunction with the Tetra Pak TBA 19 filling machines. Previously used for 200 ml Slim cartons with U-Straw 4. Production hours: 92.204 hours. Including Nordson ProBlue 4 hotmelt unit. MM + SPC + EM Manuals available., Type of Machine: Straw applicator, Capacity: 8.000 pieces per hour, Type of carton: 200 ml Slim, Development step: 10V, Drawing spec.: 678547-0101, Production hours: 92.204 hours, Dimensions: ± 230 x 100 x 210 cm, ...

The Tetra Pak Tetra Cardboard Packer 70 (TCP 70) is an automatic secondary packaging machine designed for grouping and packing filled Tetra Pak carton packages into wrap-around cardboard or corrugated board cases. It is widely used in dairy and beverage packaging lines operating in ambient conditions. It is flexible and has a number of possibilities when it comes to package sizes, packing patterns and cardboard units. This machine is previously used for 1 Liter Slim / Base cartons, 4x2, in a tray (not wraparound). Output: up to 7.000 cartons/hour (depending on format and configuration). Feeding side: Left hand. Infeed type: Multi. Infeed: U-form. Conveyor speed in: 35 m/min. Conveyor width: B79/B65. Hotmelt unit (Robatech KPC12, serialnr 134590, year 2005)., Type of Machine: Cardboard Packer, Capacity: up to 7.000 cartons per hour, Type of carton: 1.000 ml Slim / Base, Development step:  ...

Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing spec.: 3434618-0100, Weight: ± 325 kg

Unused Servo Control for a Tetra Pak Cap 30 Flex. Tetra Pak article number: 90605-9390. Official Tetra Pak description: Servo-Antrieb, K5500 EtherNet/IP 528VAC., Type of Machine: Servo drive, CAT NO: 2198-H025-ERS, Instructions: 2198-IN001x-xx-x, MAC Address: 40:41:01:E0:74:10, Main input: 195-264/324-528 Vac 8.3 Arms 3 Ph 50/60 Hz, Control input: 24 Vdc 2.8A, Motor output: 0-460 Vrms 3 Ph 0-590 Hz 8 Arms Continuous, 20 Arms Peak