used Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) for sale

WEILER COMMODOR 230 AC / with CE marking / 3-axis digital display Gxadgeq -Built in 1999 -Tip height 230mm -Center width 1000mm - Turning diameter over bed 475mm -Circulation diameter via face slide 270mm -Rod passage 56mm -Speed range 25-2000rpm (infinitely variable via potentiometer) • Automatic longitudinal/plan feeds -Thread/Metric/Inch/Pitch/ -Tailstock MK4 -Quick-release bracket with insert -Coolant device -Chip back panel -Feed protection electric -Three-jaw chuck approx. 200mm -2xEMERGENCY/OFF -Documentation Dimensions: LxWxH 2.6x1.5x1.7 meters / Weight 1800Kg

turning length: 1000 mmturning diameter over bed: 380 mmturning diameter over slide rest: 190 mmnumber of spindle speeds: 25 - 2000 U/min.turning speeds: 18 Stk.spindle bore: Ø 56,0 mmtailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mmbed width: 310 mmspindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/Ufeeds - cross: 0,011 - 0,4 mm/Uthread: M 0,3 - 10,0 mmvoltage: 380 Vtotal power requirement: 7,5 kWweight of the machine ca.: 1600 kgrange L-W-H: 2320 x 1400 x 1600 mmLathe with precision ground and induction hardened bed.Very suitable, for example, for use in workshops and teaching facilities.Furnishing:- robust lead and pull spindle lathe- FORKARDT 3-jaw chuck Ø 200 mm, with chuck key- MULTIFIX steel holder - size B - with 3x inserts- movable tailstock, including keyless chuck- Chip protection back wall- EMERGENCY stop button at the front- adjustable bed stop-  ...

turning length: 1000 mmturning diameter over bed: 380 mmturning diameter over slide rest: 190 mmnumber of spindle speeds: 25 - 2000 U/min.turning speeds: 18 Stk.spindle bore: Ø 56,0 mmtailstock quill taper MT: DIN 228 / MK 4 quill stroke: 150 mmbed width: 310 mmspindle taper: DIN 55027 / 6 feeds - longitudinal: 0,022 - 0,8 mm/Ufeeds - cross: 0,011 - 0,4 mm/Uthread: M 0,3 - 10,0 mmvoltage: 380 Vtotal power requirement: 7,5 kWweight of the machine ca.: 1600 kgrange L-W-H: 2320 x 1400 x 1600 mm Machine from a workshop for the disabledLathe with precision ground and induction hardened bed.Very suitable e.g. for use in workshops and training centres.Furnishing:- Robust main lathe and spindle lathe with VARIO gear- 2 axis HEIDENHAIN digital display, front left- FORKARDT 3-jaw chuck Ø 200 mm, with spare jaws & chuck key- foldable lathe chuck protection- MULTIFIX steel holder - size B - with 5 ...

HAMLET COMMODOR incl. Three-axis digital display Turning length max. 1000mm Turning diameter max. 380mm Turning diameter over support 190mm Rod passage 56mm Speed range 25-2000 rpm Automatic longitudinal/face feeds Eeipidd Thread/Metric/Inch/etc Drive power 4 KW Tailstock MK4 Three-jaw chuck - Röhm 200mm Quick-change bracket incl. 3 inserts Bed stop Chip back wall Coolant system Feed protection 2 x EMERGENCY /OFF Machine Documentation Dimensions: LxWxH 2.7x1.5x1.8 meters Weight approx. 1.6 tons

Article number: 04-03-111 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  ...

Article number: 04-03-117 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30-10mm inches 80-2 3/4 g/'' Diametrical Pitch Thread 80-5.5 Dp Module 0.2-5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  ...

Article number: 04-03-147 Manufacturer: Weiler Very good general condition Machine geometrically overhauled Delivery time: on request - subject to prior sale Year of construction: as good as new L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 25-2000 rpm Spindle nose: A 2-6 Drive power: approx. 3.8kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: metric 0.30-10mm inches 80 – 2 3/4 gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release ...

Article number: 04-03-118 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1987 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø380mm Max. turning diameter via support: approx. Ø190mm Max.turning length: approx. 1000mm Spindle nose: A 2-6 Drive power: approx. 4.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.011–0.80 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 insert  Bed stop  Work light  Coolant Device New ...

Article number: 04-03-165 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: approx. 2200x1200x1800mm Weight: approx. 1500kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø475mm Max. turning diameter via support: approx. Ø270mm Max.turning length: approx. 1000mm Rod passage: approx. Ø56mm Spindle: Speed range: approx. 13-2000 rpm Spindle nose: A 2-6 Drive power: approx. 7.5kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.014-1.00 mm/rev Suitable for threads: Metric 0.30 – 10 mm inches 80 – 2 3/4 Gg/" Diametrical – Pitch Thread 80 – 5.5 Dp Module 0.2 – 5 Tailstock: MK4 Accessories  3-axis digital display SINO New  3-jaw chuck 200mm New  Quick release holder size B + 1 ins ...

WEILER COMMODOR 230 2-axle Heidenhain digital display GS - Identifier Tip height 230mm Center width 1000mm Turning diameter over bed 475mm Circulation diameter via face slide 270mm Rod passage 56mm Speed range 25-2000rpm Automatic longitudinal/flat feeds Thread / Metric / Inch Tailstock MK4 Quick-change steel holder with insert Coolant device Chip back wall Work lamp 2xNOT/OFF Feed protection Three-jaw chuck 200mm Machine feet Documentation Cjr8l82mnl Dimensions: LxWxH 2.5x1.5x1.7 meters Weight 1800 kg

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 56 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 4 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 -0.800 mm/rev Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 2-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Swivel steel holder protection - Rotating grain tip - Bed stop - Coolant device - Emergency stop push button - Machine light

Specifications: Center height: 190 mm Center width: 1000 mm Spindle bore: 63 mm Bed width: 305 mm Speeds: 25 - 2000 1/min Drive power: 5 kW Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: 0.022 - 0.800 mm/rev Weight, approx.: 1500 mm Dimensions (WxDxH), approx.: 2160 x 1120 x 1670 mm Equipment: - 3-axis digital display - 3-jaw lathe chuck - Quick-change holder System Multifix - Lead and tension screw safety device - Spindle protection with limit switch protection - Bed stop - Rotating grain tip - Coolant device - Emergency stop push button - Machine light

turning diameter over bed: 380 mmturning diameter over slide rest: 0 mmturning length: 950 mmcentre distance: 1000 mmcentre height: 180 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Distance between centers  ,155 mm Center width 800 mm Including accessories (collets, top jaws, turning tool holder)turning diameter over bed: 330 mm, turning diameter over slide: 290 mm, weight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 600 x 1,400 mm

Lead and drive screw lathe WEILER Condor incl. new digital display. - Original paint - Turning diameter over bed 330 mm - Turning diameter over support 170 mm - Turning length 800 mm - Center height 160 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal/face feeds - Tailstock MK3 - Emergency/Off - Total power requirement 3 KW - Three-cheek butter / four-cheek lining -Documentation - Multifix with insert Bcpc8wp9r2w Dimensions: LxWxH: approx. 1.9x0.9x1.5 meters Weight: approx. 850 kg

Lead and pull spindle lathe WEILER CONDOR incl. new Digital -Original paint -Turning diameter over bed 330mm -Turning diameter over support 170mm -Turning length 800mm -Center height 160mm -Spindle bore 38mm -Spindle speeds 24-2800 rpm -Automatic longitudinal/plan feeds -Tailstock MK3 -Not/Off bcpc8wp9r2w -Total power requirement 3KW -Three-jaw chuck / Four-jaw chuck -Documentation -Multifix with insert Dimensions: LxWxH approx. 1.9x0.9x1.5 meters Weight 850Kg

Article number: 04-03-141 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1986 L x W x H: approx. 2000x1000x1700mm Weight: approx. 900kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø340mm Max. turning diameter via support: approx. Ø185mm Max.turning length: approx. 800mm Rod passage: approx. Ø42mm Spindle: Speed range: approx. 30-2800 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.016-0.50mm/rev Suitable for threads: metric 0.18 – 28 mm inches 80 – 1 gg/" Diametrical – Pitch Thread 200 – 2 3/4 Dp Module 0.1 – 9 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size ...

Description: 1 used L+Z precision lathe Make: Weiler, model: Condor B, year of construction: 2002 Center width 750 mm Center height 165 mm Spindle bore 40 mm Spindle head size 5/55027 Tailstock cone MK3 Accesories: 2 axis digital display (Heidenhain) Three-jaw chuck (Schunk Rota S) Multifix size b operation manualturning diameter over bed: 330 mm, turning diameter over slide: 170 mm, spindle bore: 40 mm, turning speed range: 22-2800 rpm, total power requirement: 3 kW, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,000 x 1,600 mm

Description: 1 used L+Z precision lathe Make: Weiler, model: Condor B, year of construction: 2003 Center width 750 mm Center height 165 mm Spindle head size 5/55027 Tailstock cone MK3 Accesories: 3 axis digital display (Heidenhain ND 770) Chip protection Three-jaw chuck 160 (Schunk Rota-S-Plus) Bezel Multifix size b operation manualturning diameter over bed: 330 mm, turning diameter over slide: 170 mm, spindle bore: 40 mm, turning speed range: 22-2800 rpm, total power requirement: 3 kW, weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,000 x 1,600 mm

centre height: 165 mmcentre distance: 750 mmspindle bore: 40 mmtailstock taper MT: 3 weight of the machine ca.: 1150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 165 mmcentre distance: 750 mmspindle bore: 40 mmtailstock taper MT: 3 weight of the machine ca.: 1150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Gildemeister Model N.E.F. 320 K Year of construction 2004 Condition Used Siemens control system Specifications Circulation diameter 320 mm Turning length 750 mm Speed range - main spindle 3500 rpm Drive power - main spindle 9 kW Bar diameter 50 mm Tool holder Multifix size B Tailstock mount MK 4 Rapid traverse X / Z 8 / 10 m/min Machine weight approx. 2.5 t Space requirement approx. 2500 x 1800 x 1885 mm Accessories: 3 Jaw chuck Forkardt 200 Tool package Documentation

max. turning length: approx. 750 mm, spindle bore 40 mm, max. 1800 rpm, with Multifix quick-release system, coolant device and 3-axis digital display, Fabr. ELESTA

turning diameter over bed: 330 mmturning diameter over slide rest: 185 mmturning length: 750 mmcentre height: 165 mmspindle bore: 40 mmturning speed range: 32: 22 - 2800 U/minfeed longitudinal: 120: 0,015-0,3 mm/minmetric thread: 0,18 - 28 mmtailstock taper MT: 3 total power requirement: 1,5 / 3 kWweight of the machine ca.: 1100 kgdimensions of the machine ca.: 1,8 x 0,9 x 1,4 mCondition: ready for operation: Electric 380 Volt: Rapid transfer steel-holder: Multifix B Applications for rapid transfer steel-holder: 4 3-axis digital readout: Heidenhain ND 780 Chip protection behind: Cooling equipment: Wedge bar chuck: Forkard 200 mm4 jaw chuck Röhm : 200 mmSpindel cover: nachgerüstet Chuck protection: geschaltet Collet device: Collet devices: 40 Stück German quality brand - universal lathe in good condition with 2-stage motor and brake.Machine dealer with own stock of 2500 m².The d ...

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmcentre height: 155 mmcentre distance: 800 mmspindle bore: 38 mmspindle turning speed range: 24 - 2800 U/minspindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/Ufeeds - cross: 0,013 - 0,628 mm/Udia. of leadscrew: 24 mmlead of leadscrew: 6 mmtailstock taper MT: 3 tailstock quill stroke: 110 mmtotal power requirement: 3 kWweight of the machine ca.: 800 kgdimensions of machine L x W x H: 1,80 x 0,70 x 1,23 mAccessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 170 mmturning length: 800 mmspindle bore: 38 mmtailstock quill taper MT: 3 spindle turning speed - stepless: 24 - 2800 U/minlinear traverse of table: 0,026 - 1,253 mmfeeds crossrail-slide horizontal: 0,013 - 0,628 mm/Uquill stroke: 120 mmtotal power requirement: 2,4 / 3,0 kWweight of the machine ca.: 850 kgdimensions of the machine ca.: 1,85 x 0,8 x 1,7 m3-jaw chuck: Qick Toolholders: Machine Lamp: chip protection wall: Lining protection hood: Coolant System: The machine comes from a training company and was maintained more than needed.The general condition is very good, all functions have been checked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Center height: 160 mm Center width: 800 mm Spindle bore: 40 mm Bed width: 240 mm Speeds: 12 - 2800 rpm Drive power: 3 kW Tailstock mount: MK 3 Quill stroke: 110 mm Feeds: 0.037 - 1.253 mm/rev Weight, approx.: 800 kg Dimensions (WxDxH), approx.: 1930 x 880 x 1470 mm Equipment: - 3-jaw lathe chuck - Quick-change holder System Multifix - Spindle protection with limit switch protection - Bed stop - Emergency stop push button - Coolant device - Machine light - Machine feet

WEILER DA 210 / 3-axis digital display Heidenhain Including CE marking - ORIGINAL CONDITION Center height 210mm Center width 1000mm Circumferential diameter over bed 435mm Circulation diameter via face slide 245mm Spindle bore 52mm Speed range 40-2000 rpm Automatic longitudinal / plan feeds Drive power 5.5 KW Cjr3wkhxxx Quick-release holder with 3 inserts Feed protection Work lamp 2x EMERGENCY/OFF Central lubrication Three-jaw chuck - 200mm Documentation Dimensions: LxWxH 2.3x1.2x1.6 meters weight 1400KG Errors / input errors excepted Chip back wall Coolant device

HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg

PRECISION LATHE / HAMLET COMMODOR 180 GSD Year of construction 2022 / NEW MACHINE Tip height 180mm Center width 1000mm Circumferential diameter over bed 380mm Orbit diameter via face slide 215mm Spindle head DIN 55027 - size 6 Spindle bore 56mm Inner cone MK 6 Cgvnfcyuff Main drive 4 KW Speed range 25 - 2000 1/min Number of gear stages / 9 pieces Number of speed stages / 16 pieces Number of feeds - 200 pieces Longitudinal feeds 0.026 - 0.9 mm/rev Feed rates 0.013 - 0.45 mm/rev Thread /metric 0.3 - 10mm Thread / inch 80 - 2.75 g/inch Quill diameter 80mm Quill stroke 150mm Pinolenkegel MK 4 Coolant device Work light Chip back wall 3 - Axis Digital Display Type - Sino Three-jaw chuck - 200mm Quick-change holder with insert Complete documentation Dimensions: LxWxH 2,6x1.3x1,6 Meter Weight 1800Kg

Lead/Pull Screw Lathe Weiler Matador (Machine number: M2271) Turning length: 470 mm Center width: 500 mm Center height: 150 mm Turning diameter over face slide: 155 mm Circulation diameter over bed: 295 mm Multifix A Spindle bore: 36 mm 36 spindle speeds: 15-3550 rpm Digital display Heidenhain (1 axis) Chuck protection not locked 3-jaw chuck

Hamlet of Matador in obsolete condition SH 150 mm SW 600 mm tailstock MK 3 Guided tours Overlapping and post-processing New paint job New 3-axis digital display Emergency stop, feed protection with microswitch Miscellaneous Accessories

Machine Type: Lathe Manufacturer: Weiler Type: Matador VS2 Year of construction: to follow Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-WEI-0524 DESCRIPTION We offer you a used lathe from the manufacturer Weiler. Technical data will follow. Accessories: Interchangeable wheels as in the photo, three-jaw chuck mounted, four-jaw chuck new, 2 x Multix holder A Availability: from the end of May Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Article number: 04-03-224 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1987 L x W x H: approx. 1500x1000x1700mm Weight: approx. 600kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø280mm Max. turning diameter via support: approx. Ø160mm Max.turning length: approx. 500mm Rod passage: approx. Ø36mm Spindle: Speed range: approx. 15-3550 rpm Spindle nose: A 2-5 Drive power: approx. 3.0kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.05-0.80mm/rev Suitable for threads: metric 0.20 – 12 mm inches 80 – 2 gg/" Diametrical – Pitch Thread 160 – 6 Dp Module 0.1 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert   ...

turning diameter over bed: 300 mmturning diameter over slide rest: 150 mmturning length: 800 mmspindle bore: mmturning speed range: 42 - 2000 U/minfeeds: 0,011 - 0,91 mm/Utailstock quill taper MT: 3 total power requirement: 2,2 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,7 x 0,8 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 800 mmgreates pass round over bed: 297 mmswing diameter over slide rest: 160 mmspindle bore: 36 mm: MK 3 collet unit: bis 27 Durchmesser turning speeds: 42-2000 U/mindimensions: 1750x500x1200 mmweight: 750 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 280 mmturning diameter over slide rest: 158 mmturning length: 650 mmturning speed range: 96 - 2500 U/minfeeds - longitudinal: 0,02 - 0,63 mm/Ufeeds - cross: 0,32 x Längsvorschub mm/U3-jaw-chuck diameter: max.165 mmtotal power requirement: ca. 2 kW88140984380 V - 50 Hzcolour: greenaccessories:set of collets (59 units), multifix tool holder Size A with 6 inlets,1 punch point - revolving, 2 punch points - fix, 1 boring chuck,1 turning heart, 1 chuck for three jaws, 1 chuck for four jaws, 5 set of jaws.The machine was equipped afterwards with a 3-axis digital monitoringfrom RSF in our workshop. #The machine is in a condition as new#The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article number: 04-03-218 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1993 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

Article number: 04-03-220 Manufacturer: Weiler Very good general condition Machine partially overhauled Shipping time: All rights reserved. Year of construction: ca.1998 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-jaw chuck 160mm New  Quick Release Holder Size A + 1 Insert  Bed stop  Work Light New  Coolant Device New  Complete documentation  N ...

Beautiful hamlet intern 160. Centre distance 650 mm Center height 160 mm Turning diameter over bed 320 mm Spindle bore 40 mm Spindle speeds 24-2500 rpm Accessories: Digital display Heidenhain 3 axes 3-claw 160mm Multifix tool holder with 5 holders Collet Equipment Collets 27 pieces

Article number: 04-03-226 Manufacturer: Weiler Very good general condition Machine partially overhauled Delivery time: on request - subject to prior sale Year of construction: ca.1994 L x W x H: approx. 1700x1000x1700mm Weight: approx. 650kg Digital display: 3-axis digital display Sino New Dimensions: Max. turning diameter over bed: approx. Ø320mm Max. turning diameter via support: approx. Ø198mm Max.turning length: approx. 650mm Rod passage: approx. Ø40mm Spindle: Speed range: approx. 96-2500 rpm Spindle nose: A 2-5 Drive power: approx. 2.2kW Automatic Longitudinal & Plan Feeds: Feed range: approx. 0.007-0.63mm/rev Suitable for threads: Metric 0.25 – 8 mm inches 80 – 2 Gg/" Diametrical – Pitch Thread 200 – 5 Dp Module 0.2 – 4 Tailstock: MK3 Accessories  3-axis digital display SINO New  3-jaw chuck 160mm New  Quick Release Holder Size A +  ...

turning diameter over bed: 300 mmturning diameter over slide rest: 150 mmturning length: 800 mmspindle bore: 36 mmturning speed range: 42 - 2000 U/minfeeds: 0,011 - 0,91 mm/Utailstock quill taper MT: 3 total power requirement: 2,2 kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,7 x 0,8 x 2,0 mMachine had been active in the school centre very little used!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2003 Top height: 160mm Center width: 650mm Spindle bore: Ø 40mm Circulation over bed 320 mm Spindle speed: 20-2500 Tailstock mount: MK3 Quill Stroke: 85mm Quill diameter 40 mm Longitudinal carriage feed range: 0.020 - 0.630 mm/rev Feed range face slide: 0.006 - 0.200mm/rev Possible thread types: Metric, Inch, Modulus, Diametrical Pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Main motor 3.5 kW Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 710kg Accessories as shown in the pictures: 3-axis digital display, coolant device, chuck protection, 4-jaw chuck, punch pliers and other collet equipment incl. Collets, Multifix with 2 inserts, manuals.

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

turning diameter over bed: 650 mmturning diameter over slide rest: 440 mmturning length: 7000 mmcentre height: 330 mmcentre distance: 7000 mmspindle bore: 61 mmøspindle turning speed range: 8 - 800 U/mintotal power requirement: kWweight of the machine ca.: 5,9 tdimensions of machine L x W x H: 8,75 x 1,35 x 1,48 mAccessories: face plate 450 mmø, 4-pos. tool holder, running center, coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 720 mmturning diameter over slide rest: 500 mmturning length: 1000 mmspindle turning speed range: 7.1 - 1800 U/minfeeds - fine adjustment: 6 - 6,28 mm/Ufeeds crossrail-slide horizontal: 0,005 - 6,28 mm/Uspindle drive: 15 kWcentre height: 360 mmspindle bore: 82 mmtotal power requirement: 28 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 m3-jaw chuck: 315 mmQick Toolholders: Multifix GR. 8 Digital Read Out: Acu-Rite Face plate: 600 mmmotorized top slide: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 950 mmturning diameter over slide rest: 569 mmturning length: 2200 mmspindle bore: 90 mmfaceplate: 800 mmsteady: 500 bed width: 580 mmRapid travel: turning speeds: 800 U/mindigital readout: stepless reg. with elect. turning speeds: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 6,5x2x1,8 mChip conveyor can be purchased as an option for €7,500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 480 mmswing diameter over bed slide: 300 mmturning length: 1500 mmcentre height: 240 mmcentre distance: 1500 mmspindle bore: 42 mmspindle turning speed range: 14 - 1400 U/mintotal power requirement: kWweight of the machine ca.: 2,4 tdimensions of machine L x W x H: 3,00 x 1,05 x 1,40 mAccessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running centerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 440 mmturning diameter over slide rest: 250 mmturning length: 1000 mmspindle bore: 62 mmspindle speed:: 124 - 1400 tailstock quill taper MT: 4 quill stroke: 160 mmmetrical thread cutting: 0,5 - 112 mm/Uthread - inch: 1/4 - 56 inch.total power requirement: 7,5 kWweight of the machine ca.: 2,4 tdimensions of the machine ca.: 2,6 x 1,1 x 1,50 mQick Toolholders: Face plate: 3-jaw-chuck diameter: 3-jaw-chuck diameter: Weipert precision guide and spindle lathe WG 425The machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Article number: 04-03-110 Manufacturer: Weisser Heilbronn Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1989 L x W x H: approx. 3500x1000x1700mm Weight: approx. 3500kg Digital display: 2-axis digital display Heidenhain Dimensions: Max. turning diameter over bed: approx. Ø425mm Max. turning diameter via support: approx. Ø240mm Max.turning length: approx. 2000mm Rod passage: approx. Ø58mm Spindle: Speed range: approx. 28-2500 rpm Spindle nose: A 2-5 Drive power: approx. 5.5kW Tailstock: MK4 Accessories  3 – jaws – chuck Schunk Ø 250 mm  Quick-release steel bracket + 4 inserts  Electric feed protection  Work light  Complete machine documentation  NOT – Off  Various tension wrenches  Coolant device  L+Z spindle cover  Machine feet  Various turning steels � ...