Vertical Processing Centers used for sale (252)

Key data: 800 mm, 600 mm, 500 mm

CNC Vertical - Machining Center HERMLE B 300 V With track control Heidenhain iTNC 530 Year of Make: 2014 Travel : X 800 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle IKZ 40 bar Scraper belt conveyor Tool measurement in the work area ( BLUM Laser ) Coolant Setup Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Control cabinet cooling unit ( RITTAL) Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

FAMUP MCX 600 vertical CNC machining centre equipped with FANUC Series O-M control. ISO 40 spindle manufactured by Omlat. Spindle speed up to 6,000 rpm. Travels (X/Y/Z): 400 x 300 x 400 mm. Table size: 600 x 300 mm with 3 T-slots. Maximum table load: 150 kg. Spindle motor power: 7.5 kW. Electrical connection: 400 V / 50 Hz. Machine weight: approx. 2,500 kg. Machine documentation and manuals included. Serial number: 961772. Auction-ID: A7-47344-29

DMG MORI MillTap 700 Vertical machining center GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 10,000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated  ...

Auction-ID: A7-47277-2157

Key data: 2600 mm, 1200 mm, 1000 mm

Inv. Num. : 9211 Type: DMF 260 Producer: DMG Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 63822 h Hours: 29578 h Maximum vertical spindle speed: 8000 1/min X-axis travel: 2600 mm Y-axis travel: 1200 mm Travel Z axis: 1000 mm Number of axles: 5 pieces Machine weight: 25000 kg

Fanuc 21i-M control, enclosed VMC Spindle taper: BT40 Spindle speed range: 72–10000 rpm Spindle motor power: 5.5/3.7 kW Pull stud bolt type: MAS-P40T-1 Number of tools: 20 Maximum tool weight: 5 kg Maximum tool diameter: 100 mm Maximum tool length: 250 mm Tool change time (T-T): 1.2 sec Tool change time (T-C): 2.8 sec Pallet change method: Turning-table method Pallet change time: 4 sec Drilling capability: Ø22 mm Tapping capability: M18 Milling capability: 20 cc/min Machine weight: 4000 kg NC device: FANUC 21i-MA Auction-ID: A7-47344-28

Key data: 750 mm, 890 mm, 600 mm

Inv. Num. : 9210 Type: Variaxis i-800 NEO Producer: MAZAK Created: 2023 Parameters: Control System: Mazatrol Smooth Ai Work table length: 800 mm Work table width: 630 mm Maximum table load (even): 1000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 750 mm Y-axis travel: 890 mm Z-axis travel: 600 mm Number of axles: 5 pieces Number of stacking positions: 30 pieces Machine height: 3497 mm Machine length: 2695 mm Machine width: 4890 mm Machine weight: 18080 kg

! PAY ATTENTION Delivered without the ENERPAC hydraulic unit and the 2Hydraulic clamps Tool holder: BT 40 JIS B 6339 (MAS 403 BT) - [ISO 7388-2] Possibility for 20 Tools, comes without tool(holders) Auction-ID: A1-42000-142

The machine is in good technical condition, testing is possible by prior arrangement. Chip screw conveyor Programmable coolant nozzle Power failure detection module Remote control via rotary knob with color LCD display Direct thread cutting Spindle 15,000 rpm, ISO 40 taper, 30 hp (22.4 kW) vector drive, direct "inline" drive Renishaw intuitive wireless probe system 2x clamping vice 30x tool holder

Control SSM travels (X/Y/Z): 610 mm / 405–406 mm / 510–560 mm. Table size: Approximately 760 x 400 mm with a maximum load of approximately 345–350 kg. Spindle: SK 40 mounting, speeds up to 8,000 rpm. Auction-ID: A7-47277-1008

The machine is in good technical condition, after prior agreement it is possible to test it. 25 micron filter, chip conveyor belt, cooling through the spindle center, pressure 300 psi, wireless probe for tools and workpieces, side tool changer, ISO 40 taper, 30+1 tools, synchronized thread cutting, rotary gauge, 1x clamping vice, 20x tool holders

X / Y / Z axis strokes: 1020 × 510 × 550 mmSpindle power: 11 kWMax. spindle speed: 6,000 rpmSpindle taper: BT 40Tool magazine: 22 positionsWeight (kg): approx. 6000Year & Manufacturer: 1993 – FONG LEE Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-47716-251

Key data: 850 mm, 520 mm, 540 mm

Inv. Num. : 9201 Type: YCM-FV 85 A Producer: SUPERMAX Generated: 2000 Parameters: Control system: FANUC Work table length: 1000 mm Work table width: 520 mm Maximum vertical spindle speed: 10000 1/min X-axis travel: 850 mm Y-axis travel: 520 mm Z-axis travel: 540 mm Machine height: 3110 mm Machine length: 2820 mm Machine width: 2835 mm Machine weight: 5300 kg

CNC Control: HAASX/Y/Z Axis Travels: 750 × 410 × 500 mmMax. Spindle Speed: 10,000 rpm4th Axis: HAAS Compatible (Presence Shown)Spindle Hours: Approx. 19,678 h (Meter Reading)User Documentation: Present Weight (kg): Approx. 5600Year & Manufacturer: 2000 – HAAS Auction-ID: A1-47716-256

The machine is in good technical condition, testing is possible after prior agreement. 5-axis HSC machining center designed mainly for the production of molds, models, aircraft parts and large precision parts. Travels X/Y/Z 2700 × 1100 × 1400 mm Table 2000 × 2000 mm Table load capacity 12,000–15,000 kg Spindle speed up to 24,000 rpm Spindle power 34–45 kW Control FIDIA C20 Tool magazine 42–84 positions Clamping HSK 63A (some configurations HSK 100) Rapid traverses X 50 m/min, Y 40 m/min, Z 30 m/min Machine weight approx. 38–38.5 t Positioning accuracy X 0.006 mm, Y 0.005 mm, Z 0.004 mm

Manufacturer: MORI SEIKIYear: 1994Type: CNC Vertical Machining CenterNumerical Control: FANUC 16M / Mori MSG 6Strokes: X 800 mm / Y 460 mm / Z 510 mmTable: 1000 × 460 mmSpindle: ISO 40 – 8,000 rpmTool magazine: 30 positionsWeight (kg): approx. 6000Notes: Robust Japanese made CNC vertical machining center. Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-47716-217

Key data: 1270 mm, 610 mm, 720 mm

Inv. Num. : 9177 Type: VCI-D 1270 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 600 mm Maximum vertical spindle speed: 12000 1/min X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine weight: 10500 kg Equipment: Accessories

CNC Control: FANUC 0M (original manual)Number of axes: 3Axis strokes: X 1100 mm / Y 650 mm / Z 800 mmMaximum spindle speed: 8000 rpmCooling: with coolantSpindle taper: BT40Tool changer: automatic, 30 stationsYear: 1994Manufacturer: SUPERMAX Auction-ID: A1-47716-269

Key data: 1000 mm, 600 mm, 650 mm

Inv. Num. : 9176 Type: VCI-Q 1000 Producer: MAS Created: 2002, GO 2022 Parameters: Control system: HEIDENHAIN Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Travel travel Z-axis: 650 mm Machine weight: 5500 kg Equipment: Accessories

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV1200 Year: 2010 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 1,200 mm - Y-axis travel: approx. 600 mm - Z-axis travel: approx. 600 mm - Table size: approx. 1,300 x 600 mm - Spindle speed: up to approx. 8,000–10,000 rpm (typical for model) - Power: 12 kVA (according to plate) Equipment: - Fully enclosed machining cabin with double doors - Heidenhain control panel with screen & keyboard - Electronic handwheel - Tool holders rack (side mounted) - Chip conveyor - Coolant system - Working light Application: - CNC milling and machining of metal components - Toolmaking and precision part production Condition: Used Auction-ID: A7-45993-42

Key data: 800 mm, 590 mm, 480 mm

Inv. Num. : 9175 Type: MCV 1000 5AX Producer: MAS Created: 2012 Parameters: Switch-on hours: 35507 h Hours: 20417 h Table diameter: 520 mm Number of synchronized axes: 5 Maximum table load (uniform): 400 kg X-axis travel: 800 mm Y-axis travel: 590 mm Z-axis travel: 480 mm Equipment: Accessories

CNC Vertical Machining CenterManufacturer: HEADModel: CUV-10Year: 2001Order: FANUC OMDStrokes: X 1,020 mm / Y 510 mm / Z 635 mmSpindle: up to 7,500 rpm2-speed transmissionConstruction: shrouded machine, integrated coolantCondition: Used machine Auction-ID: A1-47716-234

MAZAK VTC 800 30SR machining center TECHNICAL FEATURES: Year: 2019 NC Type: MAZATROL Smooth Number of continuous axes: 5 X-axis travel: 3000 [mm] Y-axis travel: 800 [mm] Z-axis travel: 720 [mm] X, Y and Z axis travel speed: 50000 [mm/min] X, Y and Z fast travel speed: 50000 [mm/min] Minimum distance. Spindle/Table: 140 [mm] Maximum distance Spindle/table: 860 [mm] Table length: 3500 [mm] Table width: 820 [mm] Maximum weight Tabletop Allowable: 2500 [Kg] B-axis angular travel: +110 [°] / -110 [°] [°] Table surface: Ø 500 [mm] Angular travel C-axis: table revolution: 360 [°] Pin Attachment: CAT No.40 Maximum speed Spindle: 18000 [rpm] Spindle power: 35 [kW] Number of tool magazine stations: 48 Maximum length Tool Size: 350 [mm] Maximum weight per tool: 8 [Kg] Maximum diameter Tool Size: 80 - 130 [mm] Machine dimensions: 5250 x 4300 x 3419 [mm] Weight: 168 ...

CNC Control: FANUC series O-MAxis strokes: X 600 mm / Y 420 mm / Z 450 mmTable: 750 × 400 mmSpindle speed: 6000 rpmSpindle power: 13 kWSpindle taper: ISO 40Tool changer: 30 positionsIncluded equipment: NIKKEN 4th axis divider Ø 250 mmYear: 1989Manufacturer: SIGMALots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-47716-267

Inv. Num. : 9165 Type: VF-8/40 Producer: HAAS Created: 2016 Parameters: Operating hours: 4500 h Work table length: 1626 mm Work table width: 914 mm Maximum table load (uniform): 1814 kg Maximum vertical spindle speed: 8100 1/min X-axis travel: 1626 mm Y-axis travel: 1016 mm Travel Z axis: 762 mm Machine weight: 11250 kg

Type: CNC vertical machining center Manufacturer: Mikron / Haas Model: VCE 2000 / LCE 1100 Control: Haas CNC control system Year: 2000 Serial number: 18418 Tool changer: Automatic carousel tool changer Spindle taper: SK / ISO tool holder system Machine configuration: Traveling column vertical machining center Coolant system: Integrated coolant and chip evacuation system Chip conveyor: Integrated auger chip conveyor Voltage: 360 / 480 V Frequency: 50 / 60 Hz Table dimension 800 x 3100 mm; Lift crane not included; pack of tools included - as shown in the photo Remarks: Signs of normal industrial wear and usage visible Auction-ID: A7-45993-172

The machine is in good technical condition, after prior agreement it is possible to test it. Number of controlled axes: 3 Cast iron structure, prismatic guide surfaces Spindle taper: ISO 40 Max. speed 8000 rpm Power (continuous/30min): 7.5/11kW 2 gears Table dimensions: 1050x600mm Max. workpiece weight: 850kg X/Y/Z axis strokes: 850/600/600mm Tool change: 24pcs.

CNC vertical machining center for machining metal parts. Numerical control: Siemens 810DStrokes: X 630 mm / Y 500 mm / Z 500 mmTable: 800 × 500 mmMaximum table load: 500 kgSpindle cone: ISO 40Spindle speed: 10,000 rpm Auction-ID: A1-47716-248

Key data: 4200 mm, 2425 mm, 1000 mm

Inv. Num. : 9140 Type: FVC 160/4 CNC Producer: TYC Created: 2014 Parameters: Work table length: 4000 mm Work table width: 1600 mm Maximum table load (uniform): 11000 kg X-axis travel: 4200 mm Y-axis travel: 2425 mm Travel Z axis: 1000 mm Machine weight: 50000 kg Equipment: Sempuco Head KFU-NC3/45/005X

Manufacturer: VICTORYear: 1996Type: CNC Vertical Machining CenterNumerical Control: FANUC Series O-MStrokes: X 800 mm / Y 500 mm / Z 510 mmTable: 1100 × 500 mm – max. load 600 kgGuides: Prismatic slides with Turcite-B coatingSpindle: 60–6,000 rpm – BT40 / SK40 taper – 7.5 kW (continuous) / 11 kW (30 min)Tool changer: 24 tools – exchanger arm – 2.5 s tool-tool – max. tool Ø 80 mmWeight (kg): approx. 6000Notes: Mehanite heavy construction machining centre. Good working condition. Auction-ID: A1-47716-213

Key data: 762 mm, 630 mm, 610 mm

Inv. Num. : 9118 Type: XT 630 5AX Producer: Bridgeport Created: 2018 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 26283 h Hours: 13817 h Table diameter: 630 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 762 mm Y-axis travel: 630 mm Travel travel Z-axis: 610 mm Cone: BT40 Machine weight: 14600 kg

Manufacturer: SIGMAYear: 2002Type: CNC Vertical Machining CenterNumerical Control: FANUC 18MAxes: 3-Axis (X, Y, Z)Strokes: X 750 mm / Y 400 mm / Z 450 mmTable: 900 x 400 mm – max. load 600 kgSpindle: SK40 (DIN 69871-A) – 6,000 rpm – 15 kW – max. torque 191 NmTool magazine: random carousel – 21 toolsGuides: Linear guides Weight: 6,000 kgRemarks: Italian-made CNC vertical machining center, functional machine. Auction-ID: A1-47716-223

Control Mitsubishi 64S Travel Distances X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load 250 kg Spindle speed 12,000 min-1 Tool magazine for 24 Wkz. BT 40 IKZ 20 bar Suction Chip conveyor

Make: Big-Plus (Taiwan) Type: CNC Vertical Machining Center Model: 850 VMC Serial number: BM110CE01 Control: FANUC Series 0i-MD Technical data: - X / Y / Z travel: approx. 850 mm / 500 mm / 500 mm - Table size: approx. 1000 x 500 mm - Spindle speed: 10,000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: approx. 6–8 kg/cm² Equipment: - Vertical spindle (Big-Plus spindle system) - Tool changer (carousel type) - Coolant system - Enclosed working area with sliding door - Manual pulse generator (handwheel) Control panel: - FANUC interface with display and full keyboard - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-49

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

CNC Control: Siemens 828D ShopMillCourses X/Y/Z: 1220 / 600 / 610 mmTotal power: 10 / 14 kWSpindle speed: 8,000 rpmSpindle taper: SK40Tool magazine: 20 positionsEquipment: Chip conveyor, coolant, technical documentationPower supply: 400 V – 50 HzManufacturer: HuronYear: 2012Serial number: M02741Estimated dimensions (mm): 3500 x 2800 x 3200Weight (kg): 10000 Auction-ID: A1-47716-275

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

Year: 1998Serial No.: 458-66Type/Function: 4-Axis Vertical CNC Machining CenterConfiguration: 2 Pallets, 2 × 4th Axis TsudakomaNumerical Control: SIEMENSIncluded Equipment: KNOLL Filter Unit, Chip Conveyor Auction-ID: A1-47716-270

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

Technical characteristics: Number of pins: 2 Fast Forward (X/Y/Z): 60 m/min, 60 m/min, 60 m/min Tool magazine: 2 x 32 positions Positioning Tolerance (Tp): 0.01 mm Note: Machine sold without chip conveyor Auction-ID: A1-47716-350

The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.

CNC Control: SIEMENS 810 DX/Y/Z axis strokes: 1020 × 510 × 510 mmTable dimensions: 1200 × 500 mmPermissible load on table: 800 kgMax. spindle speed: 10,000 rpmSpindle power: 10 kWSpindle taper: ISO 40Tool changer: 20 positionsWeight (kg): 5800Year & Manufacturer: 2000 – HURON Auction-ID: A1-47716-250

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left

CNC vertical machining center for machining metal parts. CNC control: Fanuc 0MStrokes: X 850 mm / Y 440 mm / Z 630 mmTable: 940 × 400 mmMax. table load: 250 kgSpindle taper: BT 40Spindle speed: 45 – 8,000 rpmSpindle motor power: 7.7 / 5.5 kWTool changer: 22 positionsProjection: 380 mmTotal power: 10 kVAVoltage: 380 V Auction-ID: A1-47716-240

Key data: 750 mm, 400 mm, 500 mm

Inv. Num. : 8792 Type: Mikron VCE 750 Producer: HAAS Created: 1997 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 350 mm Maximum vertical spindle speed: 7500 1/min X-axis travel: 750 mm Y-axis travel: 400 mm Travel Z axis: 500 mm Cone: SK 40 Number of all tools: 20 pieces Equipment: 4. Axis 2023: Replacement of the manual gearbox of the tool changer Replacement of the tool plate magazine

Manufacturer: OMEGAYear: 1990Type: High-capacity CNC vertical machining centerNumerical control: FANUC 15MAxes: 3-axis (X, Y, Z)Strokes: X 1650 mm / Y 850 mm / Z 790 mmTable: 1900 x 850 mmSpindle: BT50 – up to 6000 rpm – gearbox 2 rangesTool magazine: 30 positionsWeight: approx. 15000 kgNotes: Heavy duty CNC vertical machining center, suitable for intensive machining and large parts. Auction-ID: A1-47716-227

The machine is in good technical condition, testing is possible by prior arrangement.

CNC vertical machining center for machining metal parts. Numerical control: Siemens Sinumerik 810D PowerlineStrokes: X 640 mm / Y 600 mm / Z 500 mmTable: 850 × 600 mmMaximum table load: 600 kgSpindle taper: SK 40 (DIN 69871)Spindle speed: 1 – 8,000 rpmFast feeds: X 70 m/min / Y 40 m/min / Z 40 m/min Toolchanger: 30 positionsSpindle motor power: 12 / 17 kWEnergized hours: 43,000 hOperating hours: 15,000 hNote: Without tool holder Auction-ID: A1-47716-242

Control Siemens 828D Travel X/Y/Z: 1100 x 610 x 610 mm Table size: 1250 x 610 mm Spindle speed: 12,000 min-1 Tool magazine for 30 Wkz., SK 40 Cooling by the spindle 3D Probes

CNC vertical machining center for machining metal parts. Axes: 3-axisStrokes: 610 x 410 x 450 mmNumerical Control: Fanuc OTEquipment: Chip ConveyorManufacturer: Yang Iron Works Co., Ltd.Country of Manufacture: TaiwanSerial No.: Z00321 Auction-ID: A1-47716-239