accessories for machine tools used for sale (2,434)

Leveling Elements - Machine Stand AirLoc - AirLoc PRP - 250 Maximum static load 8,000 kg Diameter 260 mm Height 60 mm Thread M 27 x 2 Leveling height 25 mm Weight 8.6 kg - 20 pieces in stock - unit price -

Linear rail with folding cam Height-adjustable for mounting on hole punches

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

Key data: 318 t, 318

Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Key data: 520 mm, 520 mm

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

Cone gauges Morse Taper 2 Cone gauges Morse Taper 3 Cone gauges Morse taper 4 Cone gauges steep cone 30 Taper gauges steep cone 40 Test Mandrels Morse Taper 2 Test Mandrels Morse Taper 3 Test Mandrels Morse Taper 4 Test mandrels steep cone 30 Test Mandrels Steep Cone 40 Cone cleaner Morse taper 2 Cone cleaner Morse taper 3 Cone cleaner Morse taper 4 Cone cleaner steep cone 30 Cone cleaner steep cone 40

Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg

diameter: 250 mmtool adaptor: 250 length: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 900 mmdepth: 450 mmheight: 1800 mmweight: 0,152 tHigh quality professional tool cabinet.This cabinet consists of two separate boxes that are mounted on top of each othercan be. Both cabinets are 90 cm. high, 90 cm. wide and 45 cm deep.Both shelves are adjustable in height and can hold 150 kg eachShelves are loaded.The drawer cabinet is equipped with 6 drawers of 100 mm height. OneDrawer is 200mm high. Max. load per drawer is 100kg.All drawers are centrally locked.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various fixed steady rests for lathes up to center height approx. 600 mm

various machine tables, angle tables, universal tables, clamping cubes, cube tables

Various milling heads for milling machines and gear cutting machines, hobbing machines

Key data: 50 mm

Precision grinding vise with pull-down or spindle. Hardened steel, rust resistant.

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

surface area: 800455 mmno. of flutes: - groove width: - mmweight of the machine ca.: tdimensions of the machine ca.: mUniversal swivelling + tilting tableTable top rotatable 360 Tiltable forwards/backwards -15 / 45°Sideways swivelling +/- 30Cross adjustment ( Y ) 160 mmMounting surface 350 x 250 mm ( additional adapter plate )Table surface 800 x 455The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

Motors: no - Pneumatic axes Gripper rotation: Yes together with Z-axis Clamp tilting: No Clamp sprue : Yes Vacuum pupms: 1 Clamp control : Yes Euromap 12 - Stroke (Y): 700 mm - Stroke (X): 100 mm - Stroke (Z): 45-90 mm

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

- Fully Automatic filling and storage systems with WITTMANN security PLC.

plus A-C servo axis only 3 year old, not used payload 5-7 kg with A-C payload 20 kg without A-C - Stroke (Z): 3.500 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Driving method: plus A-C servo axis

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Compatible machine: up to 350 t - Stroke (Z): 3.000 mm - Stroke (Y): 1.600 mm - Stroke (X): 900 mm - Payload: 5 Kg - Driving method: 380 volt async

- Pneumatic axes - Gripper rotation: 90 ? - Interface: EUROMAP 12 - Stroke (X): 300 mm - Stroke (Y): 1.000 mm - Stroke (Z): 1.500 mm

- B axis: 0 ? -270 ? electric - C axis: 0 ? - 90 ? pneumatic - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Driving method: servo

- caliper rotation: 90 ? - B axis: electric 0-360 ? - assr C: pneumatic 0-90 ? (caliper rotation) - Interface: EUROMAP 12 - Compatible machine: up to 350 t - Stroke (X): 900 mm - Stroke (Y): 1.600 mm - Stroke (Z): 3.000 mm - Payload: 5 Kg - Driv

- Tooling rotation: 0 ? -90 ? - X axis: 800 mm pneumatic - Y axis: 1000 mm pneumatic - Z axis: 2000 mm three-phase electric with inverter - Interface: Euromap 67 - Compatible machine: up to 150 t - Payload: 3 Kg

Used machine in good condition. Available for immediate delivery.

5 axis robot: 3 axes driven by servo motors, A movement, C axis Rides in the following axes: X-550, Y-1200, Z-2000 The servo inverters are built into the Z axis crossbeam Touch control panel - Teach Box - Weight: 255 kg - Control: Teach Box - Stroke (Y): 1.200 mm - Stroke (X): 550 mm - Stroke (Z): 2.000 mm - Payload: 10 Kg - Driving method: servo