beverage machines used for sale (2,148)

Complete PET Bottle Filling Line for Carbonated Soft Drinks manufacturer: SIPA / PROCOMAC year of Manufacturing: 2009 location: Germany availability: Beginning October 2026 The line is currently in operation and can be inspected during production. Technical Details: capacity: approx. 12,500 bottles per hour bottle sizes: 500 ml, 750 ml, 1,500 ml neck finish: PCO 28 / 1881 750 ml additionally with sport cap (PCO 1881) consisting of: 1. Blowing machine SIPA SFR 8 with 8 cavities incl. preform feeding system incl. chiller but without preform unloading device and without high pressure compressor 2. Air conveyor GEA Procomac 3. Tribloc GEA Procomac 50 / 70 / 12 with 50 rinsing stations, 70 filling valves and 12head plastic screw capper incl. complete clain room around the machine type ISO 5”, incl. two sorting units, incl. bottle drying station after the fi ...

Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SIPA (Italy) Model: SFR 8 Year of manufacture: 2009 Machine type: rotary stretch-blow moulder for PET bottles Number of cavities: 8 Output: up to 12,400 bottles/hour Bottle formats: 0.5 l, 0.75 l and 1.5 l Neck finish: 28 mm / 1881 (short neck) Electrical connection: 400 V, three-phase Total ...

Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machines controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12 touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Technical data Manufacturer: Ortmann + Herbst Model: Hansa B 100/20 Year of manufacture: 1994, completely refurbished 2013 Machine type: rotary filler with screw capper,  ...

Used Tetra Pak A3 CF 100V 250 prisma filling line - Year 2009Technical Specifications & Performance DataThis complete carton bottling line is configured for the 250 Prisma format and combines filling, accumulation, straw application and cardboard packing functions in a coordinated industrial packaging process. The line includes equipment manufactured between 2009 and 2012, with the principal filling machine identified as model A3 CF.Filling machine: A3 CF, manufactured in 2009, 100VAccumulator: ACHX30, manufactured in 2010Straw applicator: SA30, manufactured in 2012Cardboard packer: CBP32, manufactured in 2010, 400VProduction format: 250 PrismaIncluded handling equipment: 1 paper trolley set and 2 paper reelsThe configuration is designed around carton handling and secondary packaging rather than bottle processing, making it suitable for industrial packaging applications using Prisma-styl ...

Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Manufacturer: M+F KEG-Technik Model: MICROMAT M 1/1-F KeyKeg Year of manufacture: 2011 Machine type: semi-automatic KeyKEG filling machine Capacity: 50-60 KeyKegs per hour Container formats: 20 l and 30 l KeyKEG Fitting type: KeyKEG fitting Connection voltage: 230/400 V, 50 Hz Equipment EC Declaration of Conformity (Machinery Directive 2006/42/EC) Technical documentation Condition Used. The machine has already been disman ...

Overview This LM S.p.A. multiline divider is a lane-dividing system for bottle conveying, built in 2009 by LM S.p.A. (Modena, Italy). It sorts a single-lane bottle stream into up to 4 lanes and is offered together with a bottle conveyor system manufactured by GEA Procomac - 4 lanes with each approx. 10m multiline conveyors plus the divider unit. The system is still installed and under power in a German water and soft-drinks bottling plant, remains in production until 30 September 2026, and can be visited in operation. Technical data Manufacturer of multiline divider: LM S.p.A. (Modena, Italy) Manufacturer of bottle conveyors: GEA Procomac Year of manufacture: 2009 Machine type: multiline divider with bottle conveyor system Lane division: up to 4 lanes Capacity: min. 12,500 bottles per hour Conveyor length: approx. 4 lanes each 10m (multilines) plus divider Scope of delivery LM S.p.A. mul ...

Overview This SMI TF350 is a tray packing machine for PET bottles, built in 2009 by SMI (Italy). It forms cardboard trays from flat blanks and packs PET bottles at an output of 45 to 50 packs per minute. Tray forming is carried out with an integrated Nordson ProBlue 4 hot-melt adhesive unit. The machine is fully enclosed by a safety guard with large viewing panels and hinged access doors, and is operated from a control cabinet mounted on the machine frame. It has been running as the tray packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SMI (Italy) Model: TF350 Year of manufacture: 2009 Machine type: tray packer for PET bottles Output: 45 - 50 packs/min Adhesive system: Nordson ProBlue 4 hot-melt unit Packaging material: flat cardboard blanks Guarding: full safety enc ...

Overview This SMI SK 450 T is a shrink packer for PET bottles, built in 2009 by SMI (Italy). It collates bottles into pack formations, wraps them in shrink film and shrinks the film in the integrated heating tunnel, at an output of up to 45 packs per minute. It handles 0.5 l bottles in 3x3, 0.75 l bottles in 2x3 and 1.5 l bottles in 2x3 formats. The wrapping section is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the shrink packer of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Contrary to the pictures and videos, please note that the tray forming unit is no longer available. This unit has been removed and is no longer installed in the machine/line. Technical data Manufacturer: SMI (Italy) M ...

Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves, Additional title: Cleaning system for cleaning pressurised tank cellars, Volume circulation tank: 400 l, Length: 2,5 m, Width: 3,0 m, Height: 2,9 m, Operation / Control: Simatic S7, Material: contact surfaces from stainless steel, Position: on stainless s ...

CIP system with a total of 7 tanks, including: - 1 tank with a capacity of 60 hl as a reserve water tank - 5 tanks, each with a capacity of 30 hl (manufactured in 1992), for acid, reserve water, Desi, and 2 x lye - 1 tank with a capacity of 20 hl (manufactured in 1992) for fresh water Additional system components: - 3 centrifugal pumps - Heat exchanger - Conductivity measurement - Various piping and valves, Additional title: 7-tank CIP system with pumps and heat exchanger, Volume stacked water tank: 6000 l, Volume 5 x tanks for cleaning solutions: 3000 l, Volume fresh water tank: 2000 l, Material: stainless steel, Position: vertical vessels each on 3 feet, Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 3 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Vertical outdoor tank with insulation and cladding, most recently used as a storage tank for hot water., Additional title: vertical outdoor stainless steel tank with insulation, Gross volume: 80000 l, Material: Stainless steel 1.4571 (AISI 316Ti), Position: standing on a concrete plinth, Base construction: cylindrical tank with a dished dome, Features: Insulation; cladding; lifting eyes; cleaning pipe

vertical stainless steel tanks with insulation and cladding, most recently used as storage tanks for degassed water, Additional title: vertical, insulated stainless steel tanks, Gross volume each: 14340 l, Material: stainless steel, Position: each standing on 3 feet, Base construction: cylindrical frames, Features: outlet pipe with manual valve; overflow pipe ladder bracket; manhole

Bucher Press HP 3000 "Bucher Press HP 3000 Year of manufacturing: 1982 Suitable for processing apples, pears, grapes and other fruits. Capacity: approx. 2–3 tons of apples per hour, depending on product and operating conditions. The machine was operated in a cider production facility in Germany. The machine is no longer in production."

A vertical outdoor silo with a capacity of 340 hl for storing approximately 30 tonnes of wet spent grain. The conical silo is equipped with a spent grain pump and a discharge mechanism at a height of several metres for loading lorries. A dry-running rotary vane compressor (Becker, 2019) with 18 kW serves as a spent grain blower for conveying between the lauter tun and the spent grain silo., Additional title: vertical outdoor silo with spent grain blower and spent grain discharge, Capacity: 34000 l for appr. 30 t wet spent grain, Position: standing on tank scaffolding, Base construction: cylindroconical silo, Features: Spent grain blow; spent grain screw conveyor (heated); spent grain discharge; ladders and handrails on the upper deck

Complete beer clarification plant, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Diatomaceous earth filter based on the Twin Flow system. The diatomaceous earth filter has recently undergone a complete mechanical and electrical overhaul and has been fitted with additional measurement technology. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - 2 trap filters - Buffer tank for unfiltered wine (Gross, 1979) with a volume of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a volume of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979), Additional title: Kieselguhr filter Twin Flow System, Filtration capacity: 200 hl/h, Filter area: 26 m², Max. operating pressure: 9 bar, Filter Cartridges: 135 ...

System for blending beer with degassed water and subsequent carbonation. The system is equipped with a product pump (Hilge), inductive-magnetic flow meters (E+H), control valves for blending (GEA) and CO2 dosing (Samson), a 4-way valve (GEA), and inline beer analysis technology (Anton Paar)., Additional title: Carboblender for precise mixing and carbonation, Capacity: 20000 l/h, Length: 3,40 m, Width: 1,20 m, Height: 2,50 m, Material: contact surfaces from stainless steel, Position: mounted on stainless steel frame, Features: Centrifugal pump; inline beer analyzer (Anton Paar); density measurement (Anton Paar); 2 x flow meters; 3 x control valves (for blending and CO2 dosing); 4-way valve; various piping; control cabinet with touch panel

Beer pasteurization plant. In the plate heat exchanger (APV, 1995), 200 hl/h of beer is first heated to 74 °C using hot water at 3 °C and held at that temperature for approximately 40 seconds in the holding section. Finally, it is cooled back down to 8 °C in the heat exchanger using cooled beer., Additional title: inline pasteurisation plant, Capacity: 20000 l/h, Material: stainless steel, Features: plate heat exchanger; 2 pumps; inductive flow meter; control cabinet with digital control panel

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in a cabinet on legs wi ...

Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Sommer, 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless  ...

MEYPACK VP 451 tray and wrap-around packaging machineFully automatic machine for packing beverage cans into trays and wrap-around cartons.Products and formats:- 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs- 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packsPack configurations for both can formats:- 4 x 6 loose cans in a wrap-around carton or tray- 3 x 4 loose cans in a wrap-around carton- 2 x 3 four-packs in a trayOutput:- Nominal output: 16,000 cans/h- Packaging output: 12 or 24 packs/min, including a 5% capacity reserveProduct handling:- Multi-lane bulk product infeed- Four-packs fed transversely on two lanes, with the openings facing sideways- Infeed height: approx. 1,150 mm ± 50 mm- Outfeed height: approx. 650 mm ± 50 mm- Trays and wrap-around cartons leave the machine broad side leadingOperating principle:The products are fed continuously in multiple rows, distrib ...

Cat No.: 26-0030EUBA Condition: Used Pieces: 1 Features Volume 1821 L Operating temperature 110 °C Material No. V2A Total height 2200 mm Diameter 1260 mm Description Topsoil: Cone base 2 crane eyes Threaded nozzle DN25 central according to DIN 11851 for CIP ball Socket 1/2" Lid DN500 Cylinder: Level indicator with bar and scale 1/2" Connection DN50 according to DIN 11851 rear top Connection DN80 according to DIN 11851 right Connection DN50 according to DIN 11851 left DN50 bottom connection PT 100 rear Underbody: Sloping cone base central Residual drain DN50 according to DIN 11851 Heating coil in the bottom inside Flange connection 25 3 profile feet fixed

Technical Specifications & Performance DataThis Tetra Pak A3/Compact Flex aseptic carton filling and capping line is configured for Prisma Edge packaging in the 250 ml format. It combines carton filling, cap application and Helix handling equipment for compact beverage production and industrial packaging operations. The available equipment is designed around the Tetra Pak filling platform and Cap30 DreamCap closure system.Manufacturer: Tetra PakFiller model: A3/Compact FlexMaximum production capacity: 9600 BPHPack format: 250 ml Prisma EdgeAvailable configuration: filler, Cap30 capper and Helix equipmentOperating hours: 2000Machine year: 2020Advanced Automation & Control SystemsThe equipment includes line control for coordinated operation of the available filling, closure application and handling sections. A controlled line architecture supports consistent product flow through the fillin ...

Features Volume 6200 L Material No. V2A Total height 1900 mm Cylinder height 1700 mm Outer diameter 1740 mm Depth 2700 mm Cooling jacket design Description Tank crest: Weld-on nozzle DN50 rear Front: Cone base Tasting tap Manhole oval 420 x 310 Nozzle Flap Size 37 Residual drain pipe DN50 with angled seat valve Rear: Cone base Underbody: 2 bearing cups

Features Volume 12000 L Material No. V2A Cylinder height 1730 mm Outer diameter 1750 mm Depth 5200 mm Description Tank crest: Weld-on nozzle DN50 rear Front: Cone base Tasting tap Manhole oval 420 x 310 Nozzle Flap Size 37 Residual drain pipe DN50 with angled seat valve Rear: Cone base Underbody: 3 bearing cups

Features Volume 3600 L Material No. V2A Total height 1300 mm Outer diameter 1200 mm Depth 3400 mm Description Tank crest: 2 crane eyes Weld-on nozzle DN50 Front: Clapper bottom Tasting tap Manhole 440 x 340 Clear process Rear: Clapper bottom Underbody: Residual drain pipe with disc valve DN50 Without bearing cups

Features Volume 6000 L Material No. V2A Operating pressure 8 bar Total height 1600 mm Cylinder height 1300 mm Outer diameter 1400 mm Depth 4600 mm Description Tank crest: Flange connection for pressure fitting with piping pulled forward Front: Clapper bottom Pressure fitting Flanges with sample tap Manhole 410 x 320 Clarification drain with pressure fitting Franz Vogel Rear: Clapper bottom Underbody: Residual drain pipe with angled seat valve DN50 2 bearing cups

Features Volume 3000 L Material No. V2A Total height 1600 mm Cylinder height 1500 mm Outer diameter 1400 mm Depth 2100 mm Cooling jacket design Description Tank crest: 2 crane eyes Weld-on nozzle DN50 Front: Clapper bottom Tasting tap Manhole 450 x 350 Sewage drain with pressure fitting GUTH Rear: Clapper bottom Underbody: Forward-drawn residual drain pipe with angled seat valve DN50 4 profiled feet with calottes height-adjustable

Features Volume 6200 L Material No. V2A Total height 2050 mm Cylinder height 1740 mm Outer diameter 1740 mm Depth 2700 mm Description Tank crest: Weld-on nozzle DN50 Front: Cone base Tasting tap Manhole 410 x 320 Nozzle Flap Size 37 Rear: Cone base Underbody: Residual drain pipe with angled seat valve DN50 2 bearing cups

Used complete craft beer brewery 750LTechnical Specifications & Performance DataThis complete bottling line for beer combines essential packaging machinery for craft-scale beverage production with professional utilities to ensure consistent quality and low oxygen pickup. Engineered for small to mid-size breweries, the line delivers dependable performance in a compact, semi-automatic configuration that supports efficient changeovers and straightforward operation.Production speed: 600 bottles/hour (semi-automatic rinsing - filling - capping operation)Process stages: Bottle rinsing and sanitizing; isobaric-style preparation (vacuum pre-evacuation and CO2 purging); filling and capping; labeling with integrated printingContainer types: Designed for Glass and PET bottle handlingFormats: 0.33L - 0.50LCap type: standard crown capRinsing head: 6 Filling head: 6Capping head: 6 Product compatibilit ...

Palletizer GEA Procomac Opera year of manufacturing: 2009 including: - complete pallet conveyor system - pallet magazine - Robopac stretch wrapping machine - mother pallet handling - Logopack pallet labelling system The GEA Procomac Opera is a low-level infeed palletizer designed for low to medium production capacities. It offers automatic changeover for different pallet patterns and pallet sizes, ensuring reliable and flexible end-of-line palletizing. Availability: End of September 2026