Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) used for sale (268)

Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm

: gebraucht : 2001 : 010191 : prompt, Zwischenverkauf v : Deutschland : 24500 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 30,5 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Tip height: 140 mm Turning length: 500 mm Accessories (included): Lunette Multifix "A" Collets 0.5 – 24 mm Milling device (Y-axis) 3-jaw chuck 125 mm Cs Urh Axexlr Hkszorh Face Plate 260 mm Running tip Chuck Die stock 4-jaw chuck Coolant pump Instruction manual (German)

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 36070 €: 688.94 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 480 - 16 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgdriven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultisuissewith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGT ...

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

: neu : Bulgarien : 109100 €: 2061.99 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 24 : 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 22 kW: 7500 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 turning length6.0 ...

Key data: 165 mm, 330 mm, 2800 U/min

WEILER Condor lead and pull spindle lathe (overhauled) Circumferential diameter over bed 300 mm Center width 800 mm Turning diameter over carriage 170 mm Gr. workpiece weight between the tips 100 kg Bed width 240 mm Spindle bore 38 mm Spindle speeds 24 - 2800 rpm Spindle motor 3 KW Z-travel 800 mm X-travel 170 mm Z1-travel 100 mm Lead screw diameter 24 mm Thread pitches: 35 Metric 0.35 - 12 mm 40 Witworth 2 - 45 Gg / " 25 Module 0.2 - 4 Module 32 Diametrical Pitch 5 - 90 D.P. Tailstock quill stroke 110 mm Tailstock quill diameter 50 mm Tailstock quill cone 3 MK 2-axis digital display 3-jaw chuck Multifix holder B with 8 cassettes Rotating grain tip Tailstock Thread Device: Metric, Witworth, Module, Diametral Pitch Geometrically outdated!

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 €: 1 : 22600 €: 400 mm: 1000 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 12 : 50-2.240 1/min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 4 kW: 2750 mm: 1100 mm: 1600 mm: 1540 kgThis machine is used in our workshop for repair work,therefore it has only been used very little so far.(New price € 36,070.00)driven by manual transmission3-axes digital readout Fagor 40iquick change toolpostMultifix Type Bwith4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle noseNr. 6 DIN 55027four way rapid traverse devicespindle dead centercoolant equipment1 pce. flange plate for lathe chuckØ 200 mm1 adapter sleevefull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guard ...

Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 19800 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 0.2 - 4 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 680 kgHeidenhain 3-axis digital readoutNEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with various collets from 1 to 27 mmLive centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: Colchester Type / Model: Student Center width: 500 mm Passage: 42 mm Tip height: 175 mm Turning diameter over bed: 350 mm over slides: 200 mm Speed range: 34 to 1,500 mm Feed lengthwise: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: Steel holder, 3-jaw chuck, 4 jaw chucks, steel bracket Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions

: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...

turning diameter over bed: 570 mmturning diameter over slide rest: 365 mmturning length: 3000 mmspindle bore: 62 mmspindle turning speed range: (24) 11,2 - 2240 U/minworkpiece weight: 500 kgworkpiece weight in steadies max.: 630 kglongitudinal feeds:: 0,063 - 56 mmface feeds: 0,0315 - 28 mmradial face slide travel: 345 mmupper slide-adjustment: 125 kWtailstock quill diameter: 80 mmtailstock quill adjustment: 190 mmmain drive motor: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 5,5 x 1,44 x 1,38 mWell-maintained lathe from the maintenance department.Equipment and accessories: 3-axis D.R.O., HEIDENHAIN ND 7013 3-jaw chuck FORKARDT F+315 4-jaw chuck RÖHM, 500 mm diameter Feed in upper slide Rapid traverse Lamp Coolant equipment Boring bar holder Center points Multifix tool holder with tool holder Steady rest Machine documentationThe data for this ad was created with Mod ...

Key data: 180 mm, 2000 U/min

Built in 1990 Center height 180 mm Turning diameter over carriage 190 mm Center width 1,000 mm Spindle passage 55 mm Max. spindle speed 13-2,000 rpm Spindle drive 7.5 kW Quill stroke 150 mm (MK4) Machine weight 1,650 kg Accessories: Digital display, 3-jaw chuck, quick-change steel holder with 4 inserts, 2 steady rests, coolant device.

: gebraucht : 2011 : 010192 : prompt, Zwischenverkauf v : Deutschland : 26700 €: 1 : 320 mm: 650 mm: 160 mm: 40 mm: 192 mm: 205 mm: 5 : 5 MK: 16 : 48 - 2500 1/min: 24 : 0.02 - 0.63 mm/U: 0.006 - 0.2 mm/U: 0.25 - 8 mm: 80 - 2 Gänge/: 0.2 - 4 : 200 - 5 : 150 mm: 100 mm: 40 mm: 3 MK: 85 mm: 2,4 / 3 kW: 1582 mm: 715 mm: 1245 mm: 720 kgHeidenhain 3-axis digital readoutNEW Röhm 3-jaw chuck, 160 mm diameter, with internal and external jawsQuick-change tool post with one rectangular insert and one round insertQuick-release collet chuck with collets from 3 to 29 mm diameter (in 1 mm increments)Live centreDrill chuckChuck guardLead and feed screw guardMotor brakeCoolant systemMounting feetOperating instructions in German with CE declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip width: 430mm Tip Height: 120mm Spindle bore: 23mm Spindle speeds: 60-3000 RPM Short taper spindle head DIN 4 Tailstock MK2 Feeds from 0.03 to 2.5 mm Weight approx. 360 kg New Aikron 3-axis digital display, brake of spindle motor renewed, technically checked. Accessories: Collet device, lathe chuck Quick-change steel holder 

: neu : Bulgarien : 77840 €: 1471.18 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 63 970,00 turnin ...

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

: neu : Bulgarien : 85520 €: 1616.33 €: 760 mm: 3000 mm: 380 mm: 132 mm: 520 mm: 560 mm: 11 : 140 MK: 3 : 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 410 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4470 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine  ...

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 44400 €: 848.04 €: 500 mm: 1500 mm: 250 mm: 80 mm: 300 mm: 400 mm: 8 : 80 MK: 21 : 20-2000 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 7,5 kW: 3100 mm: 1250 mm: 1400 mm: 2820 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 43 420,00 turning length2.000 mm € 46 190,00 turning length3.000 mm €  ...

:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long

turning diameter over bed: 340 mmturning diameter over slide rest: 177 mmturning length: 630 mmspindle turning speed - stepless: 55-3000 U/minweight of the machine ca.: 1.55 tdimensions of the machine ca.: 2 x 1 x 1.6 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

: gebraucht : 2015 : 1686 : prompt, Zwischenverkauf v : England : 14800 €: 1 : 330 mm: 1000 mm: 167 mm: 38 mm: 210 mm: 12 : 40 - 2500 1/min: 16 : 0.03 - 1 mm/U: 0.2 - 14 mm: 2 - 56 TPI Gänge/: 190 mm: 92 mm: 42 mm: 3 MK: 110 mm: 2.2 kW: 1940 mm: 1000 mm: 1550 mm: 685 kg3-axis digital read out Newall4-jaw chuck Bison diameter 160mm with inside and outside jawsQuick-change tool post with 1 holdCoolant deviceChuck protectionSteel holder protectionLead screw coverMachine lightManual brakeOperating manual in German with EC declaration of conformityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

: neu : Bulgarien : 120460 €: 2276.69 €: 890 mm: 3000 mm: 400 mm: 155 mm: 490 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 60 - 1/16 Gänge/: 0.125 - 120 : 525 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 7500 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 105 510,00 turning length2.000 mm € 109 230,00 turnin ...

Tip height: 250 mm Center width: 2000 mm Circumferential Ø: over bed 500 mm Spindle bore: 50.8 mm Spindle holder: size 6 Pick-up cone tailstock: 5 MK Spindle speeds: 22 - 2000 rpm Feeds: longitudinal/flat 0.05-6.4/0.025-3.2 mm/rev Thread pitches: 80 - 1 mm Electrical connection: 380 V, 5.5 kW Space requirement: 3600 x 1100 x 1500 mm Weight: 1875 kg

: neu : Bulgarien : 24940 €: 478.85 €: 325 mm: 750 mm: 165 mm: 32 mm: 190 mm: 200 mm: 5 : 4,5 MK: 2 : 85-405, 470-2200 U/Min: 48 : 0.006 - 1.77 mm/U: 0.003 - 0.885 mm/U: 0.1 - 28 mm: 0.1 - 1.75 : 70 - 4 : 150 mm: 95 mm: 40 mm: 3 MK: 100 mm: 2.2 kW: 2150 mm: 950 mm: 1350 mm: 770 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 160 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 25.360,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

: neu : Bulgarien : 60660 €: 1146.47 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 3 : 16 - 63, 63 - 250, 315 - U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 060 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by variable speed control (2 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 57 710,00 turning length1.500 mm € 58 850,00 turning length3.000 mm ...

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

: neu : Bulgarien : 53750 €: 1015.88 €: 630 mm: 2000 mm: 315 mm: 103 mm: 430 mm: 400 mm: 11 : 120 MK: 21 : 12,5 - 1250 1/min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 240 - 1 : 315 mm: 90 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3310 kgdriven by manual transmission3-axes digital readoutquick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 315 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 turning length4.000 mm € 63 790,00 turning ...

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

: neu : Bulgarien : 91920 €: 1737.29 €: 860 mm: 3000 mm: 430 mm: 135 mm: 620 mm: 560 mm: 11 : 140 MK: 7 - 42, 28 - 170, 165 - 1 U/Min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 4650 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centermain motor with frequency invertorfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachin ...

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

: neu : Bulgarien : 133520 €: 2523.53 €: 1320 mm: 3000 mm: 625 mm: 155 mm: 940 mm: 700 mm: 15 : 160 MK: 4 : 3,7 - 15,6, 14,7 - 62, 58 U/Min: 160 : 0.032 - 38.9 mm/U: 0.016 - 19.45 mm/U: 0.5 - 480 mm: 1/16 - 60 Gänge/: 0.125 - 120 : 685 mm: 270 mm: 125 mm: 6 MK: 260 mm: 30 kW: 8550 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 500 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platestailstock quill reducerelectric motor movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length1.500 mm € 118 670,00 turning length4.000 mm € 141 700,00 turni ...

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 82740 €: 1563.79 €: 860 mm: 3000 mm: 430 mm: 132 mm: 620 mm: 560 mm: 11 : 140 MK: 17 : 7,5 - 1015 1/min: 150 : 0.039 - 18 mm/U: 0.02 - 9 mm/U: 0.5 - 180 mm: 60 - 1/6 Gänge/: 0.125 - 45 : 240 - 2/3 : 435 mm: 150 mm: 105 mm: 6 MK: 225 mm: 15 kW: 3470 mm: 1700 mm: 1730 mm: 4650 kgdriven by conventional transmission3-axes digital readoutquick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round)3-jaw chuck Bison3295/DIN6350, Ø 400 mmspindle dead centerfour way rapid traverse devicefoot pedal brakelongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocktailstock quill reducermechanized movement of tailstocklow voltage machine lampoperating manualmachine according to ",CE",F ...

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 50390 €: 952.37 €: 500 mm: 1500 mm: 250 mm: 75 mm: 300 mm: 400 mm: 8 : 80 MK: 3 : 25-100, 100-400, 500-2000 U/Min: 120 : 0.04 - 12 mm/U: 0.02 - 6 mm/U: 0.5 - 120 mm: 60-1/4 Gänge/: 0.125 - 30 : 240-1 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3100 mm: 1250 mm: 1400 mm: 2800 kgdriven by variable speed control (3 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 250 mmspindle dead centerlongitudinal stop for 1 positioncoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 49 250,00 tur ...

Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg

: neu : Bulgarien : 40850 €: 780.24 €: 400 mm: 750 mm: 200 mm: 52 mm: 235 mm: 320 mm: 6 : 6 MK: 4 : 18-98, 48-265, 144-790, 3 U/Min: 80 : 0.015 - 0.6 mm/U: 0.0075 - 0.3 mm/U: 40 : 0.25 - 7.5 mm: 120 - 4 Gänge/: 0.0625 - 1.875 : 235 mm: 110 mm: 50 mm: 4 MK: 100 mm: 7.5 kW: 1530 kgdriven by variable speed control (4 steps)3-axes digital readout FAGOR with CSS (constant surface speed)quick change toolpostAmestra with 4 holders (3 square, 1 round)3-jaw chuck Bison 3204/DIN6350, Ø 200 mmspindle dead centercoolant equipmentfull length rear splash guardleadscrew and shaft protectionsafety guard for the chucktoolholder guardlevelling bolts and platesquick release tailstocklow voltage machine lampoperating manualmachine according to ",CE",FURTHER TURNING LENGTHS: turning length 1.000 mm € 41.580,-The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

: neu : Bulgarien : 55100 €: 1041.39 €: 600 mm: 2000 mm: 300 mm: 80 mm: 400 mm: 400 mm: 8 : 90 MK: 3 : 20 - 100, 80 - 400, 400 - U/Min: 120 : 64 : 0.5 - 120 mm: 60 - 1/4 Gänge/: 0.125 - 30 : 315 mm: 130 mm: 90 mm: 5 MK: 230 mm: 11 kW: 3600 mm: 1500 mm: 1650 mm: 3110 kgIn contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter.It is possible to ensure a ",constant cutting speed", (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer&apos,s request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display.driven by variable speed control (3 steps)3-axes digital readout Fagor with CSS (constant surface speed)quick change toolp ...