grinding machines used for sale (2,433)

Surface Grinding Machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of Make: 1998 Table length: 400 mm Table width: 200 mm Workpiece weight max. on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions LxWxH: 1,800 x 1,200 x 2,250 mm

sanding belt measurements: 150x2000 mm: 1400/2800 U/minband speed: 16,5/33 m/stotal power requirement: 2,6/3,37 kWweight: 190 kgStandard features:- vibration-free running smoothness- Working height adjustable- S1 motors with 100% duty cycle- Surface and contact grinding is possible- Removable protective cover for surface grinding- Connecting piece for double suction- Built to CE standardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm: 1400/2800 U/minband speed: 16,5 / 33 m/stotal power requirement: 3,4/4,5 kWweight: 190 kgMaximum grinding of pipes is possible:at 90 degrees max. 150 mm Øat 60 degrees max. 127 mm Øat 45 degrees max. 100 mm Øat 30 degrees max. 70 mm ØThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 135 liter: 1220 mmtank diameter / tank height: 1.220 / 1035 mm: 304 mmmotor capacity: 0,75 kWmotor speeds:: 1500 U/minvoltage: 400 Vweight of the machine ca.: 600 kgdimensions of the machine ca.: 1,38 x 1,28 x 1,04 mDryer- Serial-No.: 15772 / 96-08- Machine ON: 44.854 h- Heat unitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

charge load: 620 Liter: 1.700 mmtank diameter / tank height: 1.550 / 600 mm: 450 mmmotor capacity: 4,5 / 7,5 kWmotor speeds:: 900 / 1.485 U/minvoltage: 400 Vtotal power requirement: 8,5 kWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,00 x 1,70 x 1,50 mSoundproofing cover bracket: 3,30 x 0,60 x 0,40 mFinishing machine- Serial-No.: 36225 / 05- Machine ON: 6.469 h- Pneumatic separating flap- Timer- Pneumatic soundproof coverThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

grinding length: 500 mmgrinding width: 200 mmworkpiece height: 290 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMachine from the German Federal Institute of Physics and Metrology- geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced- colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdownManual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kgWarranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at  ...

wheel diameter: 150 - 500 mmtotal power requirement: 3 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 2,4 0,6 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8313 Type: 1500 R Producer: Kellenberger Created: 1972 Parameters: Table dimensions: 2060 x 140 mm Maximum grinding diameter: 250 mm Max. grinding length: 1500 mm Length: 3270 mm Width: 1600 mm Height: 1650 mm Weight: 3250 kg Equipment: DRO

Distance between points: 760 mm, Max travel Z axis: 650 mm, Maximum length to be rectified: 430 mm, Max. diameter to be rectified: 250 mm, Height of points: 125 mm, Max. grinding wheel diameter: 500 mm, Max travel X axis: 320 mm, CNC brand: FANUC, CNC model: 18TB, Main engine power: 7.5 Kw, Z and X axis resolution: 0.1 µmm, Workpiece holder head cone: MORSE 5, Ø of the hole in the workpiece holder head: 38 mm, tailstock cone: MORSE 4, Rotation speed of the workhead: 8 to 800 rpm, Dimensions (length x width): 2500x2000 mm, Weight: 4700 Kg

charge load: 260 liter: 1.300 mmtank diameter / tank height: 1.150 / 500 mm: 300 mmmotor capacity: 1,5 / 3,0 kWmotor speeds:: 985 / 1.480 U/minvoltage: 400 Vweight of the machine ca.: 740 kgdimensions of the machine ca.: 1,50 x 1,30 x 1,25 mFinishing machine- Serial-No.: 15770 / 96-08- Machine ON: 37.851 h- TimerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spline shaft Grinding machine STANKO 3M451B/1500 with accessories.

Stock number: 3889 SURFACE GRINDING MACHINE Manufacturer: LODI, Type: T 60 35 C Machines NO.: 1657, Year of manufacture: 1996 Specifications: Grinding area 600 x 390 mm Grinding length 700 mm Grinding width 350 mm Accessories: Automatic feed. Electric magnetic table mm Cooling water system. Length: 3100 mm, Height: 2100 mm, Width: 1950 mm,

Lg.Nr. 24258 Specifications: - max. capacity - working volume 200 l - Round trough vibrator rubberized inside - Diameter round trough vibrator 1225 mm - Width / height of work container 255 / 310 mm - Lower edge of the removal plug 600 mm - Engine speed machining / extraction 1500 / 1000 rpm - Drive 400 V / 3 kW - Space requirement approx. W 1300 x D 1800 x H 1100 mm - Weight approx. 950 kg

Year of Make: 1976 Last overhaul of mechanics: 1988 Last electrical overhaul: 2011

Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy

internal diameter: 800 mmgrinding depth: 500 mmswing diameter: 850 mmtotal power requirement: kWweight of the machine ca.: 6,4 tdimensions of the machine ca.: mUsed internal cylindrical grinding machine with face grinding devicein special design with enlarged swing diameterand extended, hydraulic transverse movementReconstructed and modernized 1995 in the Glauchau manufacturer’s plant,put into operation 19961. TECHNICAL DATA1.1 Working areaGrinding diameter in the workpiece guardinternal grinding, min./max. mm 30/630(800)External grinding, max. mm 800Grinding depth, up to approx. mm 500Table stroke mm 800Workpiece diameter, max. mm 800Swing diameterin workpiece protection, max. mm 800Without workpiece protection, approx. mm 850Distance from workpiece spindle headto grinding spindle carrier, max. mm 1225Adjustment of the internal grinding deviceon the table, max. mm 5451.2 Workpiece h ...

honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed without warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mmgrinding length: 600 mmcentre height: 175 mmControl: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mVery well maintained machine.The machine comes from a precision grinding shop from the Black Forest.Can still be viewed under power for a short time at the sellers premises.In 2022, the machine was partially overhauled and serviced in-housewith production of the geometry according to the manufacturers protocol.Equipment:-2-axis digital readout FAGOR-sine bar-tailstock with fine adjustment-Hydraulic tailstock-Surface grinding device-Internal grinding device-Fischer UJ70 internal grinding spindle-Paper belt filter-automatic sequence: roughing-finishing-firing-returTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed Treiber from a Nagel MSU2 controlNo warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

honing diameter: 9999999 mmstroke: 9999999 mmthroat: 9999999 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed panel of a NAGEL MSU2No warrantyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 6100 mmgrinding width: 350 mmworkpiece height: 300 mmControl: total power requirement: 75/92,5 kWweight of the machine ca.: 20 tdimensions of the machine ca.: 12.500 x 1.800 x 2.600 mBrand ReformMachine no 2050-SL377Type AR 61 Type 8/CNCCNC Brand SiemensCNC Type Sinumerik 805Year of make 1997Machine weight 20.000 kgHorizontal Grinding length 6.100 mmgrinding width 350 mmGrinding height 300 mmEngine power 75 / 92.5 KwAutomatic depth feed Grinding stone diameter 600 mm øMagnetic plate size 5x 1.200 x 350 mmCooler with magnetic filter Machine size (lxwxh) 12.500 x 1.800 x 2.600 mm5x Magnetic plate, adjustable in degrees.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1800 mmgrinding length: 6500 mmswing diameter: / mmelectric control: SIEMENS winCC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1524 mmgrinding length: 8000 mmswing diameter: mmcentre distance: 8500 mmcontrol: Fanuc 18i-TB working spindle drive: 30 kWwork piece spindle speed: 7-42 U/mingrinding wheel size: - mmgrinding diameter - min.: - mmgrinding motor: 38 kWgrinding wheel speeds: 450 - 1250 U/mintotal power requirement: ca 75 kWweight of the machine ca.: - tdimensions of the machine ca.: - mmodernized in 2024equipped with- CNC Control FANUC 18i-TB- Ball screw type - Tailstock- coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2000 mmgrinding width: 600 mmworkpiece height: mmControl: total power requirement: 17 kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 300 mmwith manual ongoing: . 0manually feed: . 01,5 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mmmax. dia. of grinding wheel: 200 mmwith manual ongoing: . 0manually feed: . 00,73 KWThe technical Data are manufacturer or operator information andtherefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.