grinding machines used for sale (2,433)

grinding length: 1000 mmgrinding width: 300 mmworkpiece height: 230 mmtable surface area: 1000 x 240 mmx-travel: 1000 mmy-travel: 270 mmz-travel: 350 mmgrinding wheel diameter: 240 mmgrinding spindle speed: 2180 U/mintable speed -stepless-: 3 - 30 m/mintotal power requirement: 4,5 kWweight of the machine ca.: 2,8 tdimensions of machine L x W x H: 2,36 x 1,37 x 2,0 mAccessories: magnetic plate 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), wet grinding attachmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mmgrinding width: 250 mmworkpiece height: ca. 385 mmtable surface area: 600 x 200 mmtable speed -stepless-: 2 - 35 m/mintable load capacity: max. 250 kggrinding wheel size: ø 225 x 25 mmgrinding wheel hole diameter: 50,8 mmvertical feed autom.: 0,001 - 0,099 mmrapid traverse vertical: 600 mm/mincross feed of table continual: 10 - 1000 mm/minrapid traverse cross: 1000 mm/mintotal power requirement: 6 kVAdimensions of machine L x W x H: 2,65 x 1,70 x 2,28 mAccessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Other WEISS CNC Tip width [mm] 650 General: Control WEISS CNC Center width 650 mm Center height 200 mm Grinding wheel dimensions 400x60 mm + 500x60 mm Workpiece headstock: Speed 10 -650 rpm Workpiece weight max. 250 (100) kg Grinding diameter max. 390 mm

The machine is sold on behalf of a customer, is still on power, fully functional and can be viewed in Wuppertal by appointment. Elb Surface Grinding Machine Built in 1979 Travels 1500mm x 500mm Machine was extensively overhauled in 2022. Invoices worth approx. 30,000€ are available. We can load. The buyer takes care of transport. Technical data, accessories and description of the machine are non-binding

Michael Deckel S0E Stylus Tool Grinding Machine, SOE Weilheim TOP Condition Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Absolute top condition! Only one overhauled machine has a slightly superficial patina the bare metal parts. The pictures speak for themselves. The workshop dream in Reseda green :-) Plug with phase inverter

Graver Grinding Machine Michael Deckel S0, SO Tool Grinding Machine Weilheim Total weight approx. 90kg Top grinding wheels with an outer diameter of up to max. 100mm are used Good used condition. Full function. Including a few common collets. Inclusive a universal socket wrench for changing grinding wheels. 380 volts. Plug with phase inverter

Universal tool and cutting grinding machine TACCHELLA 4 AM - Universal device, Hydraulic movement of the table., Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 400 mm, Cross travel y axis: 250 mm, Clearance between worktable and spindle axis: 375 mm, Wheel speed: 3000/6000 rpm, Wheel dimension: 200x20 mm, Spindle motor power: 1,5 Kw, Weight: 1150 Kg, Accessories: Cooling system, motorized dividing device

Machine Details Stock-No. 1105-04056 Type of machine Surface Grinding Machine - Horizontal Make CHEVALIER Type FSG- 818 AD Year of manufacture 1998 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Price Technical details grinding length 450 mm grinding width 200 mm workpiece height 350 mm electro magnetic clamping plate 350 x 200 mm table speed -stepless- 5 - 25 m/min dimensions of grinding wheel 200 Ø x 19 x 32Ø mm total power requirement 1.7 kW weight of the machine approx. 3.6 t Additional information automatic vertical feed, dressing devise, electro magnet, coolant with paper filter, hydraulic separate

volumn: 3 x 16 Litercontrol: Siemens S7-300 turning speeds: 481 U/mincharge load: 1 kgworkpiece weight: 15 gdimension of workpiece: 30 x 30 max. mmmachining: nass, nass, trocken total power requirement: 400 Vweight of the machine ca.: 300 kgdimensions of the machine ca.: 2,5 x 1 x 1,5 mDisc finishing machine Mulktifinish MF 16/3, year of manufacture 2007We are selling 2 identical disc finishing machines.In the drum of the centrifugal machine, the grinding elements move toroidally under the influence of the activator, while the workpieces are placed freely in the grinding mass and perform complex rotary movements in it during the process.The numerous contacts of the grinding elements with thesurface of the workpieces at high angular speeds lead to deburring, grinding or polishing of the workpieces.https://www.topfinish.eu/wp-content/uploads/Brochure-MF.pdf The data for this ad was created ...

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

grinding diameter: 355 mmgrinding length: 600 mmweight of the machine ca.: 7,5 tcentre height: mmtotal power requirement: kWdimensions of the machine ca.: mSinumerik 840D sl cnc controltail stockmeasuring devicediamant rollportal loading deviceTechnische Daten / technical details:schleifbarer Durchmesser / grinding diameter 355 mmSchleiflänge / grinding lenght 600 mmSchleifscheibenmaß / grinding wheel dimension 600x80x304 mmReitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 9 kWGewicht der Maschine / weight 7500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

Center height 115 mm Tip distance 500 mm Clamping diameter 250 mm Largest / smallest distance clamping table surface to spindle center 370/70 mm Largest vertical distance between the centre of the grain and the centre of the spindle 255/45 mm Largest horizontal distance from the centre of the spindle to the centre of the grain / the edge of the clamping table 340/385 mm Longitudinal slide path / cross slide path 500/270 mm Perpendicular travel of the carriage beam 300 mm Swivel of the clamping table 90° Swivelling of the grinding head around the vertical axis 360° Tiltability of the grinding head to free angle below and above the center 15..0..15° Adjustability of the grinding head to twist angle right and left direction 60..0..60° Grinding spindle speeds 1100/2200 1/min Power of the drive motor / hydraulic motor 0.9 kW Net weight of the machine 780 kg

MAX DIAM 200

Rotary table surface grinding machine ARTER A 3-16 -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: Dq20Ft LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg

G&N Kugelmüller MPS 1 8Gtvfcv88 -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Drive motor 0.6KW -Coolant device -Machine enclosure Dimensions; LxWxH 0.8x0.7x1.6Meter / Weight 150Kg

Friedrich Zimmermann PS Profile Grinding Machine Table dimensions: 500x500 mm Belt width: 40 mm Incl. lots of abrasive belts Dimensions approx. 950x700x1500 mm Weight: approx. 300 kg

grinding diameter: 250 mmgrinding length: 400 mmcentre height: 125 mmControl: Fanuc 21i-T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine gewartet und teilüberholt.-Neue Schleifspindellagerung-Neue x-Achs Spindel-Obertisch überschliffen-Neue Geometrie Tischgeometrie-Neue Geometrie WSS zu SchleifspindelnB-Achse mit 1° Hirth VerzahnungLängspositionierungHF-InnenschleifspindelGAPPapierbandfilte rThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

working area: mmspeed: m/minBar length: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Fritz Studer Series 152 favorit CNC Grinding Machine Year: 2021 Linear Axes: Max. Travel X = 285 mm, Max. Travel Speed X= 10,000 mm/min, Max. Travel Z= 1,150 mm, Max. Travel Speed Z= 20,000 mm/min; Spindle drive: Max. Spindle Power= 9 kW, Max. Number Of Revolutions= 2'810 /min, Max. Grinding Wheel Diameter= 508 mm, Max. Grinding Wheel Width= 80 mm; Swiveling Axes: Swiveling Range B= 210 Degrees, Swiveling Range C= Full; Workpiece Data: Workpiece Length= 1,030 mm, Workpiece Diameter= 349 mm, Max. Workpiece Weight= 120 kg, Distance Between Centers= 1,000 mm, Center Height= 175mm, Includes Keys, Fanuc Series oi-TD Controller, Also Includes Cyclotron Products Chip Conveyor and Filter, MistBuster 500 Mist Collector, and Hammond Transformer, 480v

ELB SURFACE GRINDER 460x2440mm CNC Dresser

Universal cylindrical grinding machine for external and internal grinding with accessories Features: - Automatic grinding cycles - X/Z axes electrically controlled - Table can be swivelled up to 30° - Swivelling grinding head - Short changeover times from external to internal grinding - Easy to use - Compact design Hours: 12936 Weight: 2300Kg Technical data: see picture Further details on request

Various flanges

Lissmac Steel Brush Machine SBM-M B2 Passage width max.1500 mm Machinable sheet thickness0.5 - 20 mm Payload300 kg/m Voltage400 V / 50 Hz Mesh shape3~ PEN / 3~ PE+N Rated current43 A Nominal power23.5 kW Degree of protectionIP 42 Feed infinitely variable0-4 m/min. Plate thickness adjustment electric Setting toolselectrically Weight approx. 2300 kg Dimensions (W/D/H) approx. 3100/1400/1800 mm

rotary table dia.: mmmax. dia. of grinding wheel: mmwith manual ongoing: 0manually feed: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mmgrinding length: 600 mmcentre height: 320 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMaschine wird überholt nach Kellenberger Messprotokoll und neu lackiert.Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerungersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neueElektrik.Siehe Beispielfotos.Maschine mit verstärktem Werkstückspindelstock zumfliegend Schleifen von schweren Werkstücken.Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt.Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mmgrinding width: . mmworkpiece height: . mmmagnetic plate size: . mmtotal power requirement: . kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg