grinding machines used for sale (2,429)

Grinding spindleDKF2.6 - 4 / 1 ( 2.1 6-4/1 )TGL 4870 ( TGL4870 )n max: 20000 rpmØ 60 mmMounting hole: Ø 13.5 mm (conical)Drive: Ø Spigot: 17.9 mm; Ø Thread: M10 x 1Dimensions: 300 x 60 x 60 mm

Grinding spindleDKF3.4 - 3 / 2 ( 3.4-3/2 )TGL 4870 ( TGL4870 )n max: 32000 rpmØ 40 mmDimensions: 285 x 40 x 40 mm

Grinding spindleFEMINA3.4 - 3 / 1 ( 3.4-3/1 )TGL 4870 ( TGL4870 )n max: 32000 rpmØ 40 mmDimensions: 260 x 40 x 40 mm

Grinding spindleDKF3.8 - 8/2 ( 3.8-8/2 )TGL 4870 ( TGL4870 )n max: 14000 rpmØ 80 mmDimensions: 635 x 80 x 80 mm

Grinding spindleDKF5.12-7/21TGL 4870 ( TGL4870 )n max: 4000 rpmØ 125 mmDimensions: 590 x 125 x 125 mm

Grinding spindleDKF2.10-7-1TGL 4870 ( TGL4870 )n max: 10000 rpmØ 100 mmDimensions: 520 x 100 x 100 mm

Grinding spindlePAGUSP80x160R5554Ø 80 mmDimensions: 260 x 90 x 80 mm

grinding diameter: 660 mmgrinding length: 2000 mmworkpiece weight: 1500 kggrinding wheel diameter: 400 mmcontrol: X-As. Diatos 602 total power requirement: 12/22/30 kWweight of the machine ca.: tdimensions of the machine ca.: mIncluding:With Diamant Wheel / Plunge GrindingWith Spark out / Face GrindingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle, Machine Spare PartEX-CELL-O GmbHType 65.607.5.Serial No.: G 005522Speed: max 320 rpmShaft diameter: Ø 50 mmNew !Dimensions: 525 x 155 x 185 mm

Spindle, machine spare partPAGUSG 15055420113090LOC - Q2BShaft diameter: Ø 60 mmFlange diameter: Ø 160 mmNew !Dimensions: 540 x 160 mm

Spindle, machine spare partPAGUSG 152378shaft diameter: Ø 50 mmOuter diameter: Ø 125 mmNew !Dimensions: 575 x 125 x 125 mm

Spindle, machine spare partEX-CELL-O GmbHType 85.515.5.Serial No.: G 005229Speed: max 1600 rpmShaft diameter: Ø 60 mmNew !Dimensions: 560 x 340 x 270 mm

working area: 12-60 mmspeed: 60/120 m/minBar length: 4000 mmFeed: 0-5 mm/Urolling power: 500-40000 Nweight: 1200 kgtotal power requirement: 3 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: . mmdrilling length: . mmlip angle: . °total power requirement: kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,5x1x1,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cup Grinding WheelsFAGN13001150 x 80 x 20. A 130x642 pieces !New !Dimensions: 170 x 170 x 180 mm

grinding length: 2100 mmgrinding width: 600 mmworkpiece height: . mmmagnetic plate size: 2000x600 mmtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Honing machine, SUNNEN EC3500, (like ml3500 ml5000 ml2000), this machine is currently under complete electronic retrofit (Siemens / Telemecanique), Touch screen. Loader interface possible

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

MELCHIORRE Sp3 / 600 4 rings copper plate, rings with ceramic inserts, diamond lapping lapping machine Under power in our warehouse in Gussago BS Mimu machine tools, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_oxide ...

Lapping machine, STAHLI FLM 500, 3-ring lapping machine This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_o ...

Universal Radius Metal Belt Sanding Machine Specifications: - Sanding belt dimensions 2000 x 75 mm - Surface grinding opening 400 x 75 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Working height 960 mm - Various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

4 - Stations Tool Grinding Machine Pre-grinding - disc 200 x 50 x 5 1mm - table size 400 x 200 mm Regrinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm Lap Cut - Disc / Diamond 125 - 12.5 x 51 mm - Table Size 400 x 200 mm Chip guide - disc -150 x 8 x 51 mm Coolant Setup Task light Engine speed 1,400 / 2,800 rpm Electrical values 380 V / 0.37 / 0.6 KW Space requirement W - 1,100 x D - 1,000 x H - 1,400 mm Weight approx. 340 kg

max. dia. of grinding wheel: 200 mm: 40 mmvoltage: 380 Vturning speeds: 1400/2800 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Control type (cnc/manual): Manual, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic , Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

Grinding wheel dimensions (od x id x width): 325 x 175 x 125 mm, Ø min/max to be rectified: 1.5 / 50 mm, Regulating wheel width: 125 mm, Regulating wheel dimensions (od x id x width): 220 x 125 x 125 mm, Grinding wheel width: 125 mm, Grinding wheel head motor power: 7,5 Kw, Long: 1.520 mm, Width: 1.020 mm, Tall: 1.260 mm, Weight: 1.600 Kg

Distance between points: 500 mm, Height of points: 100 mm, Ø of the grinding wheel: 300 mm, Normal grinding wheel width: 25 mm, Maximum usable width of the grinding wheel: 50 mm, Grinding wheel hole: 127 mm, Workpiece holder head: 75-110-150-220-275-375-550-750 rpm, Tilt table in degrees: 8º, Hydraulic table speed: 0.10/6 m/min, Automatic fast forward: 20 mm, Advance in depth: 0.10 to 1 mm, Plongee feed rate: 0.10-5 mm/min, Fine-tuning time regulation in seconds: 60s, Workpiece holder head motor: 2 speeds: 0.38/0.55 HP, Motor head for grinding wheels: 3 CV, Hydraulic pump motor: 0.5 HP, Cooling pump motor: 0.10 HP, Internal grinding apparatus: 0.75 HP, Points: Morse 4 and 3, Weight approx.: 1600 Kg

Grinding wheel dimensions (od x id x width): Ø 406 x Ø 203 x 200 mm, Ø min/max to be rectified: 1.5/100mm, Regulating wheel width: 200 mm, No. of regulating wheel speeds: infinite, Min/max speed of regulating wheel (r.p.m.): 0/450rpm, Regulating wheel dimensions (od x id x width): Ø 270 x Ø 140 x 200 mm, Grinding wheel width: 200 mm, Plow (auto/manual): Automatic, Maximum length to be rectified in plongeé: 200 mm, Grinding wheel head motor power: 15 kW, Long: 2020 mm, Width: 1300 mm, Tall: 1420 mm, Weight: 4200 Kg

x-travel: 420 mmy-travel: 270 mmworkpiece height: - mmtable-size: 254 x 482 mmthroat: 254 / 318 mmgrinding spindle speeds: 12. - 60.000 U/min.spindle stroke: 92 mmspindle turning speed range: 90, 136, 184, 280 U/minnumber of strokes adjustable: 2 - 120 Hübe bei 51 mm0: 1,25 µm bei 30 mmRequired air-pressure: 7 barweight of the machine ca.: 1430 kgdimensions of the machine ca.: 1,45 x 1,2 x 2,4 mCondition: unchecked: Electric 380 Volt: Tool cupboard: 2 Rotary table: Moore 254 mmGrinding head with air turbine: 4 x The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available.Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, ecce ...

Machine Details Stock number 1105-04042 Machine Type: Surface Grinding Machine Make JACOBSEN Type 1432 Year of construction 1992 Condition Conventional control type Storage location HAGUENAU FRANCE Country of origin Delivery time at short notice - by arrangement. Freight base delivery from site. Price Technical details Grinding length 900 mm Grinding width 410 mm Travel - x 900 mm Travel - y 410 mm Travel - z 300 mm Machine weight approx. 2700 kg Information Distance table - spindle center: 135-575 mm Table speed X: 30-30000 mm/min. Table speed Y: 4-3750 mm/min. Table speed Z: 4-4000 mm/min. Max. grinding wheel dimension: 300x50x76.2 mm Drive power grinding spindle: 4.7 kW MAGNETIC PLATE BRAILLON 800 X 400 MM 5 GRINDING FLANGES

grinding diameter: 630 mmgrinding length: 2000 mmcentre height: mmControl: SIEMENS 840 D max. workpiece weight between centres: 3000 kgworkpiece weight in steadies max.: 4000 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.