grinding machines used for sale (2,252)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360039 Technical data Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Fine Grinding Machine Spiro F7 Processing of various workpieces made of different materials with opposing flat surfaces that are to be ground on one or both sides, e.g. Wafers, valve covers. Machine type: Spiro F7 Machine No.: 360034 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece outer duchm. Ø 5 – 220 mm Workpiece height 0.6 – 80 mm Condition: Technical – very good / Visually – very good (Pictures partly similar)

Superfinish machining of cylindrical workpieces. Machine type: RollerPro 470 Machine No.: 780707 Technical data Superfinish Stone Processing External cylindrical machining in continuous use Workpiece diameter: 5 – 100 mm Length: 5 – 250 mm Stone Guides: Up to 10 Roller diameter: max 140 mm Roller length: 900 mm Condition: Factory New (Pictures partly similar)

Superfinishing of cylindrical workpieces of all kinds, also with heels, since the lifting device of the SF is available: rolling elements, piston pins, shock absorber rods, etc. Machine Type: RollerPro 474 Machine No.: 300841001 Technical data Superfinish Stone Processing Diameter 4 – 150 mm Condition: Technical – good / Optical – used (Pictures partly similar)

Superfinish machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RaceX Machine No.: 780700 Technical data Superfinish Stone Processing Outer diameter: max. 320 mm Inner diameter: min. 40 mm Width: max. 260 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

Superfinishing machine RacePro 4000 machining of cylindrical and tapered roller bearings, inner and outer rings. Machine type: RacePro 4000 Machine No.: 780698 Technical data Superfinish Stone Processing Outer diameter: max. 4000 mm Inner diameter: min. 1200 mm Width: max. 400 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex 725-727/1 Machine No.: 770062 Technical data Superfinish Stone Processing Workpiece diameter: max. 200 – 650 mm Workpiece width: max. 100 – 250 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

RaceFlex superfinishing machine for machining ball and roller bearings. Machine type: RaceFlex Machine No.: 780695 Technical data Superfinish Stone Processing Outer diameter: 20 – 200 mm Inner diameter: min. 10 mm Width: max. 130 mm Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

Double side grinding of flat mass parts, e.g. cams, piston rings. Machine type: Planet V7 Machine No.: 381019 Technical data Double page flat grinding Part diameter: max. 180 mm Part thickness: max. 100 mm Condition: Technical – very good, Optical – as good as new (Pictures partly similar) Seller Offer No. resale 770057

Nano superfinishing machine for surface machining of gears, sealing components, injectors. Machine Type: Nano Machine No.: 770057 Technical data Superfinish plan machining Standard version with fire extinguishing system Workpiece length: max. 150 mm Workpiece diameter: max. 100 mm Processing diameter: max. 50 mm Meitec In-Process Measurement Condition: Technical – very good / Optical – as good as new (Pictures partly similar)

CenFlex 1 superfinishing machine for machining crankshafts, camshafts and cylindrical shafts. Machine type: CenFlex 1 Machine No.: 770054 Technical data Superfinish strip processing Strip processing Workpiece length: max. 1000 mm Stroke (KW): max. 100 mm Devices: 5 Condition: Technical – good / Optical – as good as new (Pictures partly similar)

Belt Sander Flott BSM 75A

BaseFlex 1300 superfinishing machine for machining crankshafts and camshafts. Machine type: BaseFlex 1300/1 Machine No.: 770046 Technical data Superfinish strip machining of crankshafts and camshafts Center width: max. 1300 mm Stroke: max. 180 mm Loading height: max. 1000 m With pallet conveyor Condition: Technical – good / Optical – used (Pictures partly similar)

MultiFlex superfinishing machine for machining cylindrical and wave-shaped workpieces with superfinishing belt. Machine type: Multiflex 722/2 Machine No.: 770041 Technical data Superfinish strip processing of handlebars Workpiece length: max. 1000 mm Workpiece diameter: max. 100 mm Ball screw diameter: max. 35 mm Condition: Technical – good / Optical – used (Pictures partly similar)

GOODWAY GRW-4010 Traveling head Cylindrical grinder YOM 2018 About 600 working hours Control Mitsubishi M70 Distance between centers 1030 mm Max. swing over table Ø 420 mm Max. load between centers 750 kg Max. external grinding diameter Ø 400 mm Roundness 1.5 µm Machine positioning accuracy 2 µm WHEEL SPINDLE Swivel angle 0°~35° Wheel O.D. x width x I.D. Ø 610x Max.100x Ø 203 mm Wheel spindle travel 320 mm Min. setting unit 0.001 mm Max. rapid traverse speed 6 m/min. Grinding feed rate 0.001 - 6,000 mm/min. WORK TABLE Swivel angle -3° ~ +8° Max. rapid traverse speed 10 m/min. Min. setting unit 0.001 mm Grinding feed rate 0.001 - 8000 mm/min. WORK-PIECE SPINDLE Servo Spindle motor -Swivel angle Swivel angle +90° ~ -30° Center taper MT#5 TAILSTOCK Travel 35 mm Center taper MT#5 MOTOR Axes drive motor X-axis 3.5 kW Z-axis 4.5 kW Wheel spindle moto ...

Forplan Ergomag PM 3000Year of manuf. : 2023 Control : ____________Description:Technical Data:Speed (stepless):0-3.300 U/minCageload (max.):8 kgEquipment/Accessory:Partscleaning:Denios WashingtableFurther Accessory:Misc. operating materials

EMAG WEISS W 11-CNC SL650Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 650 mm____________Description:In Generel:ear of construction:2020Control system:WEISS CNCCentre width:650 mmCentre height:200 mmGrinding wheel dimensions:400x60 mm + 500x60 mmWorkpiece headstock:Speed:10 -650 rpmWorkpiece weight max.:250 (100) kgSanding diameter max.:390 mmMounting:MK4Grinding headstock:Peripheral speed:20 - 50 m/sGrinding disc dimensions right:500 x 60 mmGrinding disc dimensions left:400 x 60 mmX-axis:380 mmZ-axis:700 mmB-axis:torque motor, infinitely variableTailstock:Pinole diameter:50 mmPionole stroke:45 mmMounting:MK 4Cylinder fine adjustment:+/- 0.04 mmEquipment:Positioning sensors:Direct scalesGrinding spindles:2x grinding spindle (left/right)GAP / Crash Controll:Structure-borne sound (Sensotronik)Balancing:MPM balancing deviceWorkpiece measurement:Marposs PF MEAutomat ...

Ziersch ZT 612Year of manuf. : 2018 Control : Mitsubishi GOT 2000 Grinding length : 1200 mmGrinding width : 600 mm____________Description:Equipment:Year of manufacture:2018Control system:Mitsubishi GOT 2000X-axis:1,600 mmZ-axis:650 mmGrinding wheel dimensions:400 x 50 x 127 mmSpeed range:1,000–2,500 rpmPower:11 kWMagnetic worktable:1.200 x 600 mmCoolant supply:Coolant system with filterEmulsion mist separator:RevenSetup mode:Electronic handwheel

A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible.

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mGENERALÜBERHOLT Foto von ähnlicher bereits gelieferter Maschine- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, Positionar)mit E5N- B-Achse- Kel-Set- hydraulischer Pinolenrückzug- Mikroverstellung am Reitstock- Werkstückspindelstock mit schwenkbarem Unterteil- Schleifscheibenausrüstung LINKS 500mm- Schleifscheibenausrüstung RECHTS 400mm- Innenschleifeinrichtung 120mm für riemengetriebene Innenschleifspindeln (standard)- CNC-Steuerung FANUC 18i-TA- vorbereitet für Messsteuerung Marposs kombiniert (Minialsar, P ...

grinding diameter: 350 mmgrinding length: 1000 mmcentre height: 175 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mTeilüberholte Maschine mit Messprotokoll nach NeumaschinentoleranzNEUE Steuerung Eckelmann ENCmit BEMA SchleifsoftwareKEL-ASSIST für Kelco 90numerisch gesteuerte B-AchseInnnschleifrinrichtung Dia 80mmSchleifscheibe links Durchmesser 400mmSchleifscheibe rechts Durchmesser 300mmInnenschleifspindel HJN 828hydraulischer ReitstockMikroverstellungKEL SET MesssystemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 21770 €: 417.98 €: 457 mm: 460 x 146 mm: 450 x 150 mm: 482 mm: 180 mm: 1900 mm: 1400 mm: 2130 mm: 680 kg: 208 x 12,7 x 31,75 mm: 1,5 kW: 3 mm: 0,01 mmmanual vertical feedmanual longitudinal and cross movement of the tablegrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuck150x450 mmcoolant equiptment with filtermanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 050068 : prompt, Zwischenverkauf v : Taiwan : 39520 €: 754.83 €: 1 : 457 mm: 450 mm: 457 x 203 mm: 450 x 200 mm: 215 kg: 500 mm: 530 mm: 5 - 25 m/min: 960 mm/min: 0,4 - 6 mm: 230 mm: 0,002 - 0,04 mm/min: 2850 1/min: 1,5 kW: 0.75 kW: 0.04 kW: 0.19 kW: 3,7 kW: 2200 mm: 1575 mm: 1950 mm: 1320 kg: 215 kg: 250 kg: 203 x 12,7 x 31,75 mmcontrol panel on swiveling armaut. vertical feedgrinding wheel spindle on 4 high precision angular contact bearingselectro-magnetic chuckcoolant equiptment 34 lt with magnetic separator and dust exhaustmanual dresser with diamondgrinding wheelgrinding wheel flangegrinding wheel balancing scalebalance arborLED machine lampmachine and equipment according to the CE-regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 €: 100 x 2.000 mm: 20 - 76,1 mm: 1 : 1 : 3 kW: 220 kgThe AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipp ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 247810 €: 2100 mm: 850 mm: 2000 x 600 mm: 2x 1000 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 7710 mm: 3320 mm: 2850 mm: 6530x3200x3350 mm brutto mm: 10200 kg: 900 mm: 1240 kg: 2000 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape w ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 17940 €: 344.45 €: 350 mm: 300 mm: 500x160 mm: 350x150 mm: 300x150x55 mm: 2800 1/min: 3,6 kW: 1020 mm: 820 mm: 2170 mm: 440 kg: Dm. 200x78x78 mmThis Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it isequippedwith a long column supported by four bearings and is opportunely stiffenedby a sturdy column support.This Surface grinding machine, due to its stiffness and geometrical stability,is highly suitable for grinding with precision pieces of notable height: single or mass-produceddie-shop components, moulds, punches, gears and others.Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motorto the axis,equipping this model of Grinding machine with fixed table,allow preserving perfect work conditions over the years, too.CAST IRON BED to maintain the geometric s ...

: neu : ca. 6 Monate ab Auftragse : 162430 €: 3069.93 €: 1200 mm: 730 mm: 1200 x 600 mm: 1200 x 600 mm: 1300 mm: 5 - 30 m/min: 0-2250 mm/min: 0,001-32 mm: 685 mm: 560 mm: 0-675 mm/min: 500-2200 1/min: 11 kW: 5.5 kW: 3.1 kW: 3.1 kW: 4790 mm: 3207 mm: 2305 mm: 8100 kg: 1150 kg: 1600 kg: 405 x 75 x 127 mm: 0,0001 mmiSurface control with Touch screen for 3 axes fully automatic surface and plunge grinding system10.4” TFT high resolution color control to ensure ease of operationRough increment, finish increment, spark out (0-9 times), and automatic grinding cycleCycle interrupt, flip over for part inspection &, final dimensions setWheelhead will rise up to end, start or reference positionnd table parks at left or right side after cycle is completedDisplay accuracy 0.0001mmI/O diagnosis &, alarm displayMax. table speed (X axis) 30 m/minIntegrated machine-body temperature controlDoub ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 232840 €: 1700 mm: 850 mm: 1600 x 600 mm: 2x 800 x 600 mm: 0 - 20 m/min: 0 - 5000 mm/min: 0,001 mm: 685 mm: 0 - 2000 mm/min: 0.001 mm: 675 mm: 500 - 2200 1/min: 11 kW: 6165 mm: 3320 mm: 2850 mm: 5730x3200x3350 mm brutto mm: 9500 kg: 900 mm: 1335 kg: 1850 kg: 405 x 50 x 127 mm: 3,1 / 3,1 kW: 7.5 kW: X: 0,008, Y/Z: 0,005 mm: X: 0,006, Y/Z: 0,003 mmSmart i control with 10.4", touchscreen on a swiveling panel, with electronic wired handwheel- RS232, USB I/O connection- SMART Grind Cam (dxf transfer in G code)-PC based control with graphical dialog programming or G-code programmingInfinitely variable speedSurface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycleSpindle with 6 angular contact ball bearings (P4, class 7)Longitudinal guides with double-V-shape wit ...

: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 €: 122.59 €: 150 x 2.000 mm: 20 - 114,3 mm: 1 : 1 : 4 kW: 270 kgThe AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options.The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°.The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine.The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe grinders ...