Powder Coating Equipment HANDELSAGENTUR BENECKE 3 Zones

Powder coating plant (complete) with 3 zones of chemical pre-treatment and Hybird ovens (dryer and curing oven)
Gas and electricity (gas or electricity also possible)

The facility consists of:

Chemical pre-treatment with reverse osmosis system
Dryer with hybrid thermoblock
Walk-in coating booth with extraction unit KG PSW 8000
Powder curing furnace with hybrid thermoblock
Conveyor system with transverse displacement, manual
Electric control unit

Specification of production
Type of workpieces varies
Material of the workpieces Steel (other metals or multimetal possible on request)
Maximum weight of the load carrier 200 kg
System type: Manual conveyor

Dimensions of the maximum workpiece in the curing furnace
Max. length 3000 mm
Max. width 1500 mm
Max. height 1500 mm

Dimensions of maximum workpiece in chemical pretreatment
Max. length 3000 mm
Max. width 800 mm
Max. height 1500 mm

Energy supply
Energy for heating stoves Hybrid = natural gas + electricity
Heat output 115 kW
Energy to heat tank 1 electricity
Voltage 400V+N+PE
Frequency 50 Hz
Total electrical power 83 kW

The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions are controlled by the main control panel. Stage 1 is heated with a 72 kW electric heater

All images shown are sample examples and may differ from the original


seller offer No. resale 165062011