injection moulding machines used for sale (842)

B&A REF: 9254 TON: 60 SHOT WEIGHT: 151 STROKE VOLUME: 166CM3 INJECTION PRESSURE: 1235AR PLATEN SIZES: 650 X 650MM DBTB: 360 X 335MM MIN MOULD HEIGHT: 250MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 80MM CONTROLS: ALPHA 2 MOTOR: 11 SERVO HEATING CAPACITY: 7.7KW SCREW DRIVE: HYDRAULIC

B&A REF: 9272 TON: 85 SCREW DIAMETER: 35MM SHOT WEIGHT: 155 STROKE VOLUME: 170CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE: 360MM MAX DAYLIGHT: 810MM EJECTOR STROKE: 125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 120MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details.

Electrical injection moulding machine manufactured in 2015. This FANUC Roboshot S100iA features a closing force of 100 tons and a screw diameter of 26 mm. With a beam spacing of 460 x 410 mm, it is designed for efficient production. If you are looking to get high-quality injection moulding capabilities, consider the FANUC Roboshot S100iA machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

Injection moulding machine Arburg 420C 1000-290 BJ 2007

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

This Engel DUO 7050/650 pico was manufactured in 2013. It features a clamping force of 6500 kN, a maximum injection volume of 4160 cm³, and a screw diameter of 105 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the Engel DUO 7050/650 pico machine we have for sale. Contact us for more information about this machine.

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.

This HAITIAN ZE1900 was manufactured in 2019. It features a clamping force of 1900 kN, a maximum injection volume of 412 cm³, and a screw diameter of 50 mm. The machine includes a robot interface (Euromap 67) and is still in production with excellent condition. If you are looking to get high-quality injection molding capabilities, consider the HAITIAN ZE1900 machine we have for sale. Contact us for more information about this machine.

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.

This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine.

This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.