injection moulding machines used for sale (842)

Weight 52 kgPicker from IMM Engel Victory 80/50 Spex

Arburg 420 C 1000-250 (2000)Clamping force : 100 tScrew diameter : 30 mmDistance between tie bars : 420 x 420Shot weight : 100 gMax mold hight : 200 mMax opening : 730 gHydraulic cores : 0+ robot TECHNOMATIC

Clamping force: 60 tScrew diameter: 30 mmShot weight: 96 gDistance between tie bars V: 520 mmDistance between tie bars H: 520 mmShot volume: 106 cm31 x core pullerType: HorizontalDrive: Hydraulic

Engel INSERT 330H/90Controll: CC100 Condition: funtional Vertical machine with Horizontal injectionRotary table diameter: 1100mmClamping force: 90 tonOpening max. : 570Opening min. : 270Platen size: 590x340Screw: 40 mmScrew length: 160 mmInjection volume: 201 cm3Injection pressure: 1230 barMotor: 15 kwWeight: 5600 kgHeight 2800 mm

• Clamping Force: 80 tons (800 kN)• Screw Diameter: 35 mm• Shot Weight (PS): 165 grams• Tie Bar Spacing (H × V): 420 mm × 420 mm• Opening Stroke (Max): 450 mm• Minimum Mould Height: 250 mm• Maximum Daylight (Platen Distance): 700 mm• Control System: Selogica• Power Consumption: 29.9 kW• Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm• Machine Weight: 3,800 kgEuromap

Arburg 470 C 1500-350 (2006)Working hours : only 7.113 hClamping Force: 150 tons  Tie-bar Spacing: (H × V): 470 mm × 470 mm  Maximum Plate Size : 650 mm × 650 mm  Minimum Mould Installation Height: 250 mm  Maximum Distance between Platen (when fully open): ~750 mm  Mould Opening Stroke : 500 mm  Screw Diameter: 45 mmApproximate Shot Volume (Injection Volume): 230 cm³  Approximate Shot Weight (for PS): 210 g  Injection Pressure: 1 670 bar  Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power  Heating Power: Example listing ~ 10.2 kW  Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m  Machine Weight:4 500 kg  

Working hours : 21.447 hClamping force: 125 tonsTie-bar spacing (horizontal × vertical): 470 mm × 470 mm  Platen size (mould plate) approx: 745 mm × 770 mm  Minimum mould height (installation height): approx 300 mm  Mould opening (stroke): 600 mm  Maximum daylight between plates: approx 900 mm  Screw diameter: 40 mm  Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet  Motor power / drive: 18.5 kW drive power (pump drive)  Heating power: around 11 kW  

Arburg 270 S 250-60 (2004)Clamping Force: 25 tTie Bar Spacing: 270 mm × 270 mmPlaten Dimensions: 400 mm × 400 mmMax. Mold Opening Stroke: 275 mmMin. Mold Height: 198 mmMax. Daylight: 279 mmEjector Stroke: 95 mmMold Opening Force (Max.): 14 kNMachine Dimensions (W × D): 1250 mm × 3800 mmMachine Weight: Approximately 1900 kgScrew Diameter: 22 mmStroke Volume: 39 cm³Injection Pressure: 1810 barInjection Flow (2 Pumps): Up to 8.1 cm³/sMaterial Throughput (PS): Up to 22.0 kg/hYear of Manufacture: 2004Type: Hydraulic Injection Molding Machine

Machine Name : Chen Hsong EM120-VYear of Manufacture : 2011Operating Hours : 58,209Clamping Force (kN) : 1200Injection Pressure (bar) : 1700Cylinder Volume (cm³) : 203Screw Diameter (mm) : 42Horizontal Platen Size (mm) : 610Vertical Platen Size (mm)  : 560Tie Bar Distance Horizontal (mm) : 410

Arburg 270 C 400-100 (2000)Clamping force: 40 tScrew diameter : 20 mmDistance between tie bars : 270 x 269 mmShot weight : 25 gType : horizontalDrive : hydraulicWorking hours : 138000 h

Netstal S-1500-460 (2003)Clamping force - 150 tScrew diameter - 45 mmHours - 79.000Distance between tie‑bars (tie bar spacing): 460 × 460 mm  Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm  Min. mould height: 250 mm  Max. mould height: ≈ 550 mm  Max. daylight (max open platen distance): sometimes specified high (depending on configuration)  Injection / Plasticizing Unit:Screw (barrel) diameter: 40 mm in common version.  Shot volume (max): ≈ 201 cm³  Shot (weight) for PS: often around ~193 g (depending on material)  Injection pressure: varies by configuration (some data sources mention around 1750 bar or more)  Machine Dimensions & Weight: 10 400 kg

Clamping Force: 60 tons (600 kN)Injection Unit Orientation: VerticalRotary Table: IncludedScrew Diameter: 25 mmShot Size: Around 4.4 oz (125 g)Injection Pressure: Up to 210 barInjection Speed: Approximately 139 mm/sMould Opening Stroke: 305 mmEjector Stroke: 106 mm

Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016)Clamping force: 110 tScrew diameter: 22 mmShot volume: 41 cm3Screw L/D ratio: 20Calculated stroke volume : 41,8 cm3Correct injection pressure : 2,864 barMax. screw speed : 500 minScrew tongue : 150 NmNozzle path contact force : 250/40 mm/kNInjection flow outside : 76 cm3/sCylinder heating capacity : 6,3 kWNumber of heating zones : 4Working hours: 35.953 hoursType: HorizontalDrive: Electric

Chen Hsong SM4500-TP (2013) Supermaster Servo drive seriesClamping force: 4500 tScrew diameter: 250 mmShot weight: 61166 gDistance between tie bars V: 2100 mmDistance between tie bars H: 2430 mmOpening stroke: 2300-3400 mmShot volume: 67216 cm3Max daylight: 4500 mm

Engel ES200/45VTHL-PRO-ELAST (2002)Clamping force: 45 tType: VerticalDrive: HydraulicMachine for Rubber.

Arburg 320C 500-100 (2008)Clamping force: 50 tScrew diameter: 25 mmOpening stroke 350 mmMould height : 200 mmDistance between tie bars V: 320 mmDistance between tie bars H: 320 mmMould clamping platens: 446x446Injection pressure : 2240Injection flow : 124 cm3Ejector stroke : 125 mmEjector force: 30 kNNet weight : 2080 kgType: HorizontalDrive: HydraulicSelogicaCF card readermachine testedEnglish languageType: HorizontalDrive: HydraulicMachine hours: 53000

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine.

Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible.

2 x Injection Molding Machines for Sale: - KraussMaffei KM 280-1000 CC BJ 2000 - JBOY 12M 1998

PROCREA INJECTION-BLOW MOLDING MACHINE TYPE : Rev 300 This PROCREA REV 300 injection-blow molding machine can produce completely finished, waste-free hollow-body containers, just like injection molded containers, using various plastic materials. Its fully automatic cycles allow for capacities from 50 cc to 15 liters and weights from 20 g to 700 g. This machine is designed to work with molds with 1 to 8 cavities, and production is very high thanks to the revolver system, which performs all injection, blowing, and ejection operations of the finished part in a single step. Mold construction for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver.

Year: 2021 Working hours : 250h Reference DE478-E2300C Screw diameter: 70 mm L/D ratio: 20 Injectable volume: 1251 cm3 Injectable weight in PS: 1138 g Injection pressure: 1890 bar Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power: 33 kW Distance between tie bar: 850 x 800 mm Mold thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blow guns EUROMAP 67

Year: 2020 Operating hours: 8,000h Reference : DE388-E1700C Screw diameter: 65 mm L/D ratio: 20 Injectable volume: 929 cm3 Injectable weight in PS: 846 g Injection pressure: 1890 bar Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 kW Distance between tie bar: 750 x 750 mm Mold thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blow guns EUROMAP 67

Key data: 14000 kN, 133 mm

Clamping force : 1400 T Reference : SXN 14000-12500 Year : 2001 Screw diameter : 133 mm Max. material pressure : 1600 bar Injection volume : 8336 cm3 Injection capacity : 7919 g Injection speed : 771 mm/s Plasticizing: 143 g/s Distance between tie bars: 1300 x 1300mm Column diameter: 220 mm Working hours: 51,500 h

Key data: 9000 kN, 115 mm

STORK SXN 9000-8600 - 900 T Clamping force : 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Max. material pressure : 1600 bar Injection volume : 5349 cm3 Injection capacity : 5062 g Injection speed : 599 mm/s Plasticizing: 123 g/s Distance between tie bars : 1010 x 1010mm Column diameter: 190 mm Working hours: 38,900 h Weight of clamping unit: 38,000 kg Weight of injection unit: 11,700 kg

Key data: 1000 kN

Type: 100-380-180 CXZ Year: 2006 Clamping force: 100T Screw diameter: 22 mm Screw diameter: 35 mm

Key data: 20000 kN, 135 mm

Model: KM 2000-17200 MC Year: 2003 Clamping force: 2000 T Screw Diameter: 135 mm Operating Hours: 41,400 Robot: Sepo S900 Robot Year: 2003 Mold thickness (Mini/maxi) : 1000 x 1700mm Maximum injection pressure: 1789bar Maximum distance between clamping plates: 3600mm Dimension of the clamping plate horizontally : 2580mm Clamping plate dimension vertical : 2270mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: No

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2007 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 64,700 Robot: Sepro S4 Robot Year: 2007 Mold thickness (Mini/maxi) : 1000 x 1900mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3700mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 160000 kN, 135 mm

Model: KM 1600-17200 MX Year: 2006 Clamping force: 1600 T Screw Diameter: 135 mm Operating Hours: 70,100 Robot: BZ-V Robot Year: 2006 Mold thickness (Mini/maxi) : 700 x 1600mm Maximum injection pressure: 1784bar Maximum distance between clamping plates: 3400mm Dimension of the clamping plate horizontally : 2500mm Clamping plate dimension vertical : 2100mm Injection Volume: 9662 cm³ Injectable Weight: 8792 g Video: Yes

Key data: 130000 kN, 120 mm

Model: KM 1300-12000 MX Year: 2007 Clamping force: 1300 T Screw Diameter: 120 mm Operating Hours: 71,800 Robot: Sepro S5 Robot Year: 2007 Mold thickness (Mini/maxi) : 700 x 1400mm Maximum injection pressure:1758bar Maximum distance between clamping plates: 3050mm Dimension of the clamping plate horizontally : 2150mm Clamping plate dimension vertical : 1910mm Injection Volume: 6786 cm³ Injectable Weight: 6175 g Video: No