injection moulding machines used for sale (809)

Injection Molding Machine Ferromatik 110s-2F BJ 1999

Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006

Injection moulding machine Ferromatik basetec 85-493-520 BJ 2009

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008

Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible.

A repair-needing Arburg injection moulding machine is offered. Clamping force: 850kN, distance between tie bars X/Y: 320mm/320mm, mould mounting platens X/Y: 490mm/490mm, min. mould height: 250mm, max. opening stroke: 375mm, max. platen daylight: 625mm, ejector stroke/force: 150mm/38kN, screw diameter: 35mm, max. stroke volume: 144cm³, max. shot weight PS: approx. 120g, max. injection pressure: 1500bar. Machine weight: approx. 2500kg. Heater was removed, hydraulic pump runs unevenly. An on-site inspection is possible.

clamping force: 600 kNinjection volume: 106 cm³screw diameter: 30 mmplaten size: 590 x 600 mmCondition: used,Specification: Horizontal injection moulding machine, type: System 60/420-200- Internat. Size specification: 600 - 200injection unit:- Screw diameter: 30 mm- L/D - ratio: 20D- Injection volume: 106 cm³- Injection pressure: 1995 bar- Cylinder heating: 8,3 kWclamping unit:- Clamping force: 600 kN- Max. opening stroke: 450 mm- Mould installation height: min. 250 mm- Max. platen distance: 700 mm- Mould clamping platens: 590 x 600 mm- Clear column distance: 420 x 420 mmTotal machine:- Oil tank filling: 180 ltr.- Pump capacity: 22 kW- Voltage: 3x 400V, 50 Hz- total power: 30,3 kW- Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm- Weight without oil approx ...

clamping force: 600 kNinjection volume: 144 cm³screw diameter: 35 mmplaten size: 570 x 570 mmclosing stroke: 500 mmCondition: usedSpecification: Horizontal injection moulding machineclamping unit:- Clamping force max.: 600 kN- clamping platens: 570 x 570 mm- clear column distance: 370 x 370 mm- Distance between the mould mounting platens: 750 mm- Mould installation height: 250 mm- Opening stroke max.: 500 mm- Ejector travel hyd. Ejector stroke: 175 mm- Ejector force max.: 40 kNInjection unit:- Screw diameter: 35 mm- Screw length: 20D- Screw stroke max.: 150 mm- Max. dosing volume: 144 cm³- Moulded part weight: 121 g- Injection pressure: 1,820 bar- Injection flow max.: 154 cm³/s- Screw peripheral speed: 57 m/min-  ...

ENGEL VICTOY 160 T Type: VICTORY 860/160 spex Clamping force: 160 T / 1600 KN Year: 2017 Number of hours: 36,900 hours Screw diameter: 55 mm Injectable volume: 508 cm3 Dimensions of the trays. : 750 x 750 mm Min mould thickness: 250 mm Dimensions: 5.80 x 1.70 x 2.40 m Weight: 8900 kg

Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany

Specification Injection Moulding Machine Demag Ergotech 100/420-600 concept General data Clamping force: 1,000 kN (100 t) Year of Make: 2000 Control: Demag NC4 / ergocontrol Clamping unit Handlebar spacing (H x V): 420 x 420 mm Tool installation height min.: 250 mm Opening travel: 750 mm Ejector force: 41 kN Injection unit Screw diameter: 35 mm Injection unit: 600 Location: Aachen, Germany

Key data: 800 kN, 100 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: ENGEL Type: VICTORY 330/80 TECH Year of Make: 2012 Clamping force: 80 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 110 ccm³ Moulded part weight 100 g/hp Control: CC200 Equipment: -Robot, manufacturer: SEPRO, type: AXESS -2 x Core Pulls -Blow-out valve -Conveyor belt -Security fence

Key data: 1200 , 134 , 36

Key data: 3800 , 1693 , 80

Key data: 3200 , 845 , 65

Key data: 1250 , 174 , 43

Key data: 3200 , 694 , 60

Key data: 2000 , 50

ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...

BORCHE BH500 injection moulding machine was built in 2016 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of plastic components used in many industrial sectors and in everyday products. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This technology enables the rapid and precise production of repeatable components with complex geometries. The BORCHE BH500 has been designed for demanding mass production and intensive use. The machine is equipped, among others, with an 80 mm diameter screw and a precision mould clamping system with a force of 500 tonnes, which ensures a stable process. All operating parameters are programmed via the intuitive KEBA control system, which enables con ...

Key data: 3200 , 1035 , 70

A vertical injection moulding machine from ARBURG is offered. Clamping force: 50t, table size X/Y: 500mm/420mm, max. shot volume: 65cm³, min. opening width: 272mm (172mm), max. opening width: 522mm (422mm), hydraulic/pneumatic cascades: 2/4, hydraulic/pneumatic core pulls: 0/0, hydraulic operating hours: 6979h, automatic operating hours: 4696h, total cycles: 142609. Including shuttle table. Documentation available. Inspection possible by arrangement.

The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico.

Injection moulding machine Ferromatik Elektra 50-300 selection BJ 2008 Injection Molding Machine Ferromatik Basetec 85-493-520 BJ 2009 Injection moulding machine Ferromatik Elektra 1100-450 evol. Year of manufacture 2006 Injection moulding machine Ferromatik K 110s-2F BJ 1999 Injection moulding machine Ferromatik K 125s/2F BJ 1995 Injection moulding machine Ferromatik K 200s-2F -493 BJ 1999 Angel Priam Bito Leo Locative Hot runner regulator Gammaflux G 24 Conveyor belts Temperature control units Accessories Walther Couplings

ENGEL ES 1350/275 HL ST injection moulding machine was manufactured in 1999 in Austria by ENGEL Austria GmbH. The machine is designed for the economical production of plastic parts in various shapes, colours and for various purposes. This process utilises the injection moulding method, which involves injecting plastified plastic into a closed mould, where the material cools and takes on the mould’s shape. The combination of a high clamping force of 275 tonnes with proven components ensures high efficiency even during demanding series production. The ENGEL ES 1350/275 HL ST is fitted with a 60 mm diameter screw, which is responsible for plasticising the material and precisely feeding it into the injection mould. The ability to operate at increased injection pressure enables the processing of more demanding plastics and the precise filling of moulds with complex geometries. To increas ...

BORCHE BS 200 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of technical components and everyday products made from plastics of various shapes and for various purposes. A clamping force of 200 tonnes, combined with reliable components, ensures high efficiency even during intensive mass production. The parts are made by injection moulding, a process which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This method enables the rapid production of parts with complex geometries whilst maintaining high repeatability and a high-quality finished product. The BORCHE BS200-III Plus injection moulding machine can be further equipped with production automation systems that increase the efficiency of the entire  ...