injection moulding machines used for sale (798)

Complete used SACMI line for plastic 28mm 1881 2 pieces CSD closures

Key data: 4200 , 70

Complete line for plastic closures 1810/2 piece caps/28mm/3,1gr Including: Line 1 1810 CCM001C - year 2003, 32 cavities, no tooling TVC003A - year 2003, 6 cavities Line 2 1810 CCM003C - year 2006, 32 acvities TVC003B - year 2006, 6 cavities PMV224B - year 2003, 24 cavities BTA900B - year 2003, 9 cavities

Key data: 4300 , 1645 , 80

Key data: 25 kN, 15 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 250-75 injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the ha ...

This 3-axis Krauss Maffei KM 80-180 CX hydraulic injection moulding machine was manufactured in 2006. It has a machine weight of 3,900 kg and has completed over 4.6 million shots. The machine has been serviced annually by KraussMaffei and is decommissioned, making it immediately available. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 80-180 CX machine we have for sale. Contact us for further details.

Used AOKI SBIII-250LL-50S - Year 2016Technical Specifications & Performance DataThe AOKI-250LL-50S is a four-cavity injection stretch-blow molding machine with Direct Heatcon technology, manufactured by Aoki Technical Laboratory, Inc. in 2016. Designed for integrated preform injection and stretch-blow molding, this industrial packaging machine supports the production of plastic containers in a compact, controlled process.Configuration: 4 cavitiesInjection capacity: 386.0 cm³/shotInjection pressure: 121.0 MPaInjection rate: 204.2 cm³/secInjection mold clamping force: 490.6 kNBlow mold clamping force: 297.2 kNMaximum preform length below neck: 160 mmDimensions with safety doors closed: 5,340 × 2,100 × 3,410 mmMachine weight: approximately 10,650 kgIn its four-cavity configuration, the machine is suited to containers with an approximate capacity of up to 2.0L, with an example neck diame ...

2 used injection molding machines are for sale. Enclosed are the desired photos of our used 280t and 650t Demag machines, Robot, conveyor belt and enclosure. The machines are still involved in series production and can be viewed during operation. The costs and organization for dismantling, transport from the hall to the truck, loading and transport to your location are borne by the buyer. The used 650t machine, robot, conveyor belt and enclosure The used 280t machine, robot, conveyor belt and enclosure

Key data: 11000 , 10400 , 150

Key data: 500 kN, 70 g/PS, 30 mm

1.0 pcs. Injection moulding machine Manufacturer: ENGEL Type: VICTORY 200/50 TECH Year of Make: 2007 Clamping force: 50 tons Spar spacing: SPARLESS Screws DN: 30 mm Moulded part weight 70 g/hp Control: CC200 Equipment: -1 x core pull hydraulic

Key data: 500 , 39 , 25

Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5 full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine.

Key data: 1200 kN, 123 g/PS, 35 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is mounted on the side Manufacturer: NETSTAL Type: SYNERGY 1200-460 - 60 Year of Make: 2006 Clamping force: 120 tons Handlebar spacing: 460 x 460 mm Screw diameter 1: 35 mm Moulded part weight 1: 123 g/hp Screw diameter 2: 20 mm Moulded part weight 2: 31 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 1750 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Type: SYNERGY 1750-900-230 Year of Make: 2016 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot Wittmann, Year of manufacture: 2016

Key data: 1750 kN, 337 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side Manufacturer: NETSTAL Type: SYNERGY 1750-900-230 Year of Make: 2012 Clamping force: 175 tons Tiebar spacing: 510 x 510 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 25 mm Moulded part weight 2: 47 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 2400 kN, 377 g/PS, 50 mm

1.0 PCS Gebr. Two Component Injection Molding Machine the second unit is attached to the side, with Robots Manufacturer: NETSTAL Type: SYNERGY 2400-900 - 230 Year of Make: 2000 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 50 mm Moulded part weight 1: 377 g/hp Screw diameter 2: 32 mm Moulded part weight 2: 99 g/hp Equipment: Robot, manufacturer SEPRO Core slides 2 x DS / 1 x AS Second unit is mounted on the side Robot SEPRO

Key data: 2400 kN, 916 g/PS, 70 mm

1.0 PCS Gebr. Two Component Injection Molding Machine second aggregate is attached to the side. Manufacturer: NETSTAL Type: SYNERGY1700 - 110 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter 1: 70 mm Moulded part weight 1: 916 g/hp Screw diameter 2: 28 mm Moulded part weight 2: 59 g/hp Equipment: Core slides 2 x DS / 1 x AS Second unit is mounted on the side

Key data: 650 , 152 , 35

Key data: 800 kN, 154 g/PS, 40 mm

1.0 pcs. Injection moulding machine Manufacturer: NETSTAL Type: ELION800-270PM Year of Make: 2008 Clamping force: 80 tons Spar spacing 410 x 410 mm Installation height min./max.: 500 mm Opening travel: 350 mm Screws DN: 40 mm Max. displacement: 160.8 cm³ Moulded part weight in hp: 154.3 g Core pulls 2 pieces

Key data: 1750 kN, 457 g/PS, 55 mm

1.0 pcs. Injection moulding machine Manufacturer: NETSTAL Type: ELION1750-840PM Year of Make: 2008 Clamping force: 175 tons Spar spacing 510 x 510 mm Installation height min. / max. 500 - 800 mm Opening travel: 450 mm Screws DN: 55 mm Max. displacement: 457.6 cm³ Moulded part weight in hp: 455.8 g Equipment: 2 x Core Pull

Key data: 2400 kN, 456 g/PS, 55 mm

1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-900 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 55 mm Moulded part weight: 456 g/hp Equipment: Core slides 2 x DS / 1 x AS Robot WITTMANN

Key data: 2400 kN, 377 g/PS, 50 mm

1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-900 Year of Make: 2004 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 50 mm Moulded part weight: 377g/hp Equipment: Core slides 2 x DS / 1 x AS Robot WITTMANN

Key data: 2400 kN, 916 g/PS, 70 mm

1.0 PCS Injection moulding machine with robot Manufacturer: NETSTAL Type: SYNERGY2400-150 Year of Make: 2008 Clamping force: 240 tons Tiebar spacing: 630 x 630 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Robot SEPRO

Key data: 3500 kN, 916 g/PS, 70 mm

1.0 PCS Injection moulding machine Manufacturer: NETSTAL Type: EVOS3500-2000 Year of Make: 2009 Clamping force: 350 tons Tiebar spacing: 730 x 730 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Robot Manufacturer: SEPRO

Key data: 3500 kN, 916 g/PS, 70 mm

1.0 PCS Injection moulding machine Manufacturer: NETSTAL Type: EVOS3500-2000 Year of Make: 2010 Clamping force: 350 tons Tiebar spacing: 730 x 730 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Interface Robot

Manufacturer: REP Type: V51CY10 Year: 2021 Serial Number: V51CY1021128034 Clamping force: 2,500 kN Clearance between columns: 630 mm Machine weight: 5,490 kg Quantity: 1 pc. Category: Plastic Injection Molding Machines / Packaging Machine Type: Rubber Injection Molding Machine (Gummi-Spritzgießmaschine)

Hydraulic injection moulding machine manufactured in 2005. This DEMAG Ergotech Extra 160-430 features a clamping force of 1,600 kN and a maximum injection volume of 259 cm³. It has a screw diameter of 45 mm and accommodates molds with a maximum height of 585 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech Extra 160-430 machine we have for sale. Contact us for further details.

Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible.