injection moulding machines used for sale (865)

Ref. no.: 18494Hersteller: ENGELYear of construction: 2013Clamping unitClamping force: 50 tonOpening stroke: 400 mmMould height min.: 200 mmOpening width: 600 mmPlaten size (h x v): 500 X 450 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2400 barMeasurements and weightDimensions: 3,4 x 1,3 x 1,8 mMachine weight: 2900 kgAdditional information & extrasCore pull: 1 pcsFurther information:ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding MachineFor sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production.Key Advantages:Tie-barless design → maximum mould accessibilitySPEX special configuration → optimized for specific applicationsHigh precision & repeatabilityEnergy-ef ...

Ref. no.: 17507Hersteller: DEMAGYear of construction: 1998Clamping unitClamping force: 80 tonOpening stroke: 450 mmDistance between tie bars: 370 x 370 mmMould height min.: 200 mmPlaten size (h x v): 600 x 600 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 149 gInjection pressure: 2020 barMeasurements and weightDimensions: 4,1 x 1,4 x 2,0 mMachine weight: 3700 kg

A total of three Ferromatik injection molding machines are available. 1) Ferromatik K155, clamping force: 1550kN, max. platen distance: approx. 950mm, min. mold height: 300mm, max. opening stroke: 650mm, tie bar distance: 500mm/500mm, platen dimensions X/Y: 750mm/750mm, weight: approx. 8000kg. The machine has a leakage in the area of the hydraulic cylinders for the aggregate movement. 2) Ferromatik K200, clamping force: 2000kN, platen dimensions X/Y: 830mm/830mm, tie bar distance: 560mm/560mm, opening stroke: 650mm, daylight: 1000mm, min. mold height: 350mm. Machine dimensions X/Y/Z: approx. 7300mm/1800mm/2300mm, weight: approx. 10000kg. 3) Ferromatik K275, clamping force: 2750kN, min. mold height: 350mm, tie bar distance: 630mm/630mm. Machine dimensions X/Y: 8000mm/2300mm, weight: 13600kg. The machines are sold without handling. Documentation vorhanden. An on-site inspection is possible ...

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible.

Offered are 2 identical horizontally operating hydraulic injection molding machines from ARBURG. Clamping force: 700kN, opening stroke: 250mm, mold installation height: 200-430mm, mold mounting plates X/Y: 476mm/476mm, movable mold half maximum weight: 250kg, screw diameter: 20/25/30mm, injection pressure: 2250/2240/1550bar, horizontal injection position: max. 120mm, weight: 2090kg, machine dimensions X/Y/Z: approx. 3500mm/1900mm/1950mm. Documentation vorhanden, viewing possible by arrangement.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Injection Molding Machine Specifications 1. Main Machine Parameters Clamping force: 25 t Tool clamping system: 25 / ... Tool plate dimensions: 400 × 400 mm Clearance between columns: 220 × 220 mm Maximum Plate Distance: 425mm Ejector stroke: 95 mm Ejector force: 18 kN Year of manufacture: 2001 Weight: 2000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m 2. Injection Unit Injection Unit: ... / 60 Screw diameter: 18 mm Injection volume: 20cc Injection weight: 18 g Specific injection pressure: 2500 bar Screw L/D ratio: 24.5 3. Controls Control System: Selogica

TECHNICAL DATA OF THE MACHINE General Clamping force: 50 t Year of manufacture: 2006 Control: NC4 Weight: 2,700 kg Dimensions (L × W × H): 3.8 × 1.1 × 2.1 m Injection unit – .../200 Screw diameter: 22 mm Injection volume: 41.8 cc Specific injection pressure: 2,800 bar Closing system – 50/... Clamping force: 50 t Tool plate dimensions: 520 × 520 mm Clearance between columns: 355 × 355 mm Tool height: 210 mm Opening Distance: 400mm Maximum Plate Distance: 610mm

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 710MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

Arburg 630 S 2500 - 1300 with robot Multilift H mit B-Actise (2004)Clamping force: 250 tTie-bar spacing: 630 × 630 mmPlaten size: 900 × 900 mmMold height (Min / Max): 300 – 700 mmMaximum daylight (open space): 1,300 mmOpening stroke: 600 mmEjector stroke: 225 mmEjector force: 86 kNScrew diameter: 55 mm Shot volume: 558 cm³Injection pressure: ~2,380 barNumber of heating zones: 12Control system: SelogicaMachine dimensions: 6.4 m × 2.1 m × ~2.2 m (L × W × H)Machine weight:  14,000 kgInstalled power / electricity: ~68 kWRobot / automation interface: Euromap 2500‑1300Core pullers: hydraulic

Key data: 500 kN, 95 g/PS, 30 mm

Year of Make: 2005 Clamping force: 50 tons. shot volume: 106 cm³ shot weight: 95 gr./PS Screw diameter: 30 mm with take off robot Good condition

Key data: 250 kN, 29 g/PS, 22 mm

Year of Make: 2005 Clamping force: 25 tons. Capacity: 38 cm³ Screw diameter: 22 mm Good condition

Key data: 450 kN, 80 g/PS, 30 mm

Year of Make: 2001 Clamping force: 45 tons. shot volume: 99 cm³ shot weight: 80 gr./PS Screw diameter: 30 mm good condition

Key data: 4000 kN, 763 g/PS, 60 mm

Year of Make: 2000 Clamping force: 400 tons. Shot volume: 848 cm³ Screw diameter 60 mm Injection pressure increased: 2,421 bar Good condition, immediately available

clamping force: 1500 kNinjection volume: 141 g/PSscrew diameter: 35 mmplaten size: 470 x 470 mmCondition: used,Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITIONInjection unit:- Screw diameter: 35 mm (wear-resistant)- Centring ring diameter: 125 mm- Max. shot weight: 141 g (PS)- Injection pressure: 2,500 barClosing unit:- Clamping force: 1,500 kN- Max. opening stroke: 750 mm- Mould installation height: min. 250 mm- Mould clamping plates: 470 x 470 mm- Approx. operating hours: 79,000 h (still in use)- Operating voltage: 3x 400 V, 50 Hz- Nominal motor heating current: 75 / 40 A- Total current: 115 A- Total connection: 65 kW- Core pulls: 1x- Hot runner control points: 6x- Temperature control unit interfaces: ...

Ref. no.: 18643Hersteller: ARBURGYear of construction: 2008Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 470 x 470 mmMould height min.: 250 mmOpening width: 750 mmInjection unitScrew diameter: 35 mmInjection volume: 154 cm³Shot weight: 141 gInjection pressure: 2500 barMeasurements and weightDimensions: 4,6 x 1,6 x 2,1 mMachine weight: 4850 kgAdditional information & extrasCore pull: 1 pcsFurther information:Communication card for ProSeS interface is available (OPC-UA).Robot interface is available (EUROMAP 67).he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standa ...

Key data: 4 kN, 70 mm

Injection Molding Machine Injection Molding Machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of Make: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving Force Moving Plate: open: 105 kN close: 95 kN Clamping plate (h x v): 1,060 x 1,095 mm Clear width (h x v): 710 x 710 mm Tool opening travel: 920 mm Tool installation height min.: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry run rate: 1,550 1/h Oil filling: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 to L/W/H: 6,510 x 2,040 x 2,380 mm Tool weight max.: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Spray pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g I ...

Key data: 1500 kN, 415 g/PS, 55 mm

Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!

Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG

Key data: 6500 kN, 105 mm

Location is : Latino America !

B&A REF:  9237 TON: 320 SCREW DIAMETER:  70MM SHOT WEIGHT: 1078 STROKE VOLUME:  1185CM3 INJECTION PRESSURE:  1500AR PLATEN SIZES:  980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1440MM EJECTOR STROKE:  240MM CONTROLS: SEF 200 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:  HYDRAULIC

B&A REF:  9222 TON: 85 SCREW DIAMETER:  35MM SHOT WEIGHT: 155 STROKE VOLUME:  170CM3 INJECTION PRESSURE:  1700AR PLATEN SIZES:  590 X 570MM DBTB: 400 X 360MM MIN MOULD HEIGHT:  150MM MAX MOULD HEIGHT: 450MM MOULD OPENING STROKE:  360MM MAX DAYLIGHT:  810MM EJECTOR STROKE:  125MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 2  MOTOR: 11 HEATING CAPACITY: 7.5KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE:   HYDRAULIC

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) En ...

Injection moulding machine for food and beverages caps

Injection moulding machine for PET preforms

Clamping Force: 300 ton // Shot Weight (Max): 476 g