injection moulding machines used for sale (865)

Price 4.900+VAT (claimable)free loading on truck Injection molding machine Locking force 200t Distance between the spars 520 x 520mm Screws D.=50mm = Injection weight in hp 297gr. Machine very well preserved comes from medical equipment manufacturer Dissolution of injection molding department .with operating instructions and 2 discs. Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

R1317 Injection moulding machine ARBURG A 221 - 250 - 55 Year of manufacture 1997 Control Multronica with handling device without hopper and water distributor converted to CF drive but without card, with operating instructions for Arburg and one for the robot Machine was freed up by the purchase of new machines. but no function check from us Price free loaded on truck € 1950.-- +VAT a viewing is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any guarantee for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Key data: 2000 kN, 562 g/PS, 55 mm

Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold

ARBURG 221 M 250-55 injection moulding machine. Clamping force 250 kN Year of construction 1996. Machine does not work. It is sold in the state as is, perhaps with its defects we don't have the skills to diagnose. It is complete, likely that repair is needed, or for replacement parts.

Injection molding machine Krauss Maffei KM 650-4300 CX BJ 2010

Injection molding machine Krauss Maffei KM 800-4300 MX BJ 2006

Clamping force: 1500kN, screw diameter: 50mm, tie bar spacing: 500mm, platen dimensions X/Y: 780mm/790mm, opening stroke: 600mm, daylight: 900mm, ejector stroke: 150mm, shot volume: 305cm³, injection weight: 278g, injection pressure: 2336bar. Machine dimensions X/Y/Z: approx. 4700mm/1550mm/2200mm, weight: approx. 7000kg, control: MC4. Includes Sepro handling system. Documentation available. An on-site inspection is possible.

Key data: 1100 kN, 99 g/PS, 30 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.

Key data: 1100 kN, 254 g/PS, 45 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.

Key data: 1100 , 40

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329

Injection moulding machine Arburg Allrounder 470 H 1000-170 BJ 2010 Clamping force 1000 kN Screw diameter 30mm Screw length 930 mm Shot weight 77g With Arburg robots

Injection molding machine

Injection molding machine

Ref. no.: 18586Hersteller: KRAUSS MAFFEIYear of construction: 2011Clamping unitClamping force: 180 tonOpening stroke: 1050 mmDistance between tie bars: 560 × 510 mmMould height min.: 200 mmMould height max.: 600 mmPlaten size (h x v): 790 × 740 mmInjection unitScrew diameter: 50 mmInjection volume: 393 cm³Shot weight: 357 gInjection pressure: 1892 barMeasurements and weightDimensions: 6,07 x 1,92 x 2,01 mMachine weight: 6500 kgFurther information:Fully electric machine offering maximum precision, lowest energy consumption and highest process stabilityhis machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production.With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts.Key featur ...

Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible.

Key data: 1500 , 50

a KM-200-1000 machine with removal robot built in 2006 for sale. The machine is in neat condition and serviced by Krauss Maffei.

Key data: 4000 kN, 80 mm

Machine + Viper Robot 12

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Injection moulding machine Arburg 470C 1600/625 Bj 1995

Injection moulding machine Arburg 320C 600/250 BJ 2002

Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001